Description of cuts across cells. More...

Inheritance diagram for cellCuts:

Collaboration diagram for cellCuts:

Public Member Functions
	ClassName ("cellCuts")
	Runtime type information. More...

	cellCuts (const polyMesh &mesh, const labelList &cutCells, const labelList &meshVerts, const labelList &meshEdges, const scalarField &meshEdgeWeights, const bool verbose=true)
	Construct from cells to cut and pattern of cuts. More...

	cellCuts (const polyMesh &mesh, const labelList &meshVerts, const labelList &meshEdges, const scalarField &meshEdgeWeights, const bool verbose=true)
	Construct from pattern of cuts. Detect cells to cut. More...

	cellCuts (const polyMesh &mesh, const labelList &cellLabels, const labelListList &cellLoops, const List< scalarField > &cellEdgeWeights, const bool verbose=true)
	Construct from complete cellLoops through specified cells. More...

	cellCuts (const polyMesh &mesh, const cellLooper &cellCutter, const List< refineCell > &refCells, const bool verbose=true)
	Construct from list of cells to cut and direction to cut in. More...

	cellCuts (const polyMesh &mesh, const cellLooper &cellCutter, const labelList &cellLabels, const List< plane > &cutPlanes, const bool verbose=true)
	Construct from list of cells to cut and plane to cut with and. More...

	cellCuts (const polyMesh &mesh, const boolList &pointIsCut, const boolList &edgeIsCut, const scalarField &edgeWeight, const Map< edge > &faceSplitCut, const labelListList &cellLoops, const label nLoops, const labelListList &cellAnchorPoints, const bool verbose=true)
	Construct from components. More...

	~cellCuts ()=default
	Destructor. More...

void	clearOut ()
	Clear out demand-driven storage. More...

const boolList &	pointIsCut () const
	Is mesh point cut. More...

const boolList &	edgeIsCut () const
	Is edge cut. More...

const scalarField &	edgeWeight () const
	If edge is cut gives weight (ratio between start() and end()) More...

const labelListList &	faceCuts () const
	Cuts per existing face (includes those along edge of face) More...

const Map< edge > &	faceSplitCut () const
	Gives for split face the two cuts that split the face into two. More...

const labelListList &	cellLoops () const
	For each cut cell the cut along the circumference. More...

label	nLoops () const
	Number of valid cell loops. More...

const labelListList &	cellAnchorPoints () const
	For each cut cell the points on the 'anchor' side of the cell. More...

pointField	loopPoints (const label celli) const
	Returns coordinates of points on loop for given cell. More...

labelList	nonAnchorPoints (const labelList &cellPoints, const labelList &anchorPoints, const labelList &loop) const
	Invert anchor point selection. More...

void	flip (const label celli)
	Flip loop for celli. Updates anchor points as well. More...

void	flipLoopOnly (const label celli)
	Flip loop for celli. Does not update anchors. Use with care. More...

void	writeOBJ (Ostream &os, const pointField &loopPoints, label &vertI) const
	debugging:Write list of cuts to stream in OBJ format More...

void	writeOBJ (Ostream &os) const
	debugging:Write all of cuts to stream in OBJ format More...

void	writeCellOBJ (const fileName &dir, const label celli) const
	debugging:Write edges of cell and loop More...

Public Member Functions inherited from edgeVertex
	edgeVertex (const polyMesh &mesh)
	Construct from mesh. More...

const polyMesh &	mesh () const

bool	isEdge (const label eVert) const

label	getEdge (const label eVert) const

label	getVertex (const label eVert) const

label	vertToEVert (const label vertI) const

label	edgeToEVert (const label edgeI) const

point	coord (const label cut, const scalar weight) const

label	cutPairToEdge (const label cut0, const label cut1) const

Ostream &	writeCut (Ostream &os, const label cut, const scalar) const
	Write cut description to Ostream. More...

Ostream &	writeCuts (Ostream &os, const labelList &, const scalarField &) const
	Write cut descriptions to Ostream. More...

Additional Inherited Members
Static Public Member Functions inherited from edgeVertex
static void	updateLabels (const labelList &map, List< refineCell > &)
	Update refine list from map. Used to update cell/face labels. More...

static void	updateLabels (const labelList &map, Map< label > &)
	Update map from map. Used to update cell/face labels. More...

static void	updateLabels (const labelList &map, labelHashSet &)
	Update map from map. Used to update cell/face labels. More...

static bool	isEdge (const primitiveMesh &mesh, const label eVert)
	Is eVert an edge? More...

static label	getEdge (const primitiveMesh &mesh, const label eVert)
	Convert eVert to edge label. More...

static label	getVertex (const primitiveMesh &mesh, const label eVert)
	Convert eVert to vertex label. More...

static label	vertToEVert (const primitiveMesh &mesh, const label vertI)
	Convert pointi to eVert. More...

static label	edgeToEVert (const primitiveMesh &mesh, const label edgeI)
	Convert edgeI to eVert. More...

static point	coord (const primitiveMesh &, const label cut, const scalar weight)
	Return coordinate of cut (uses weight if edgeCut) More...

static label	cutPairToEdge (const primitiveMesh &, const label cut0, const label cut1)
	Find mesh edge (or -1) between two cuts. More...

Detailed Description

Description of cuts across cells.

Description of cut is given as list of vertices and list of edges to be cut (and position on edge).

Does some checking of correctness/non-overlapping of cuts. 2x2x2 refinement has to be done in three passes since cuts can not overlap (would make addressing too complicated)

Introduces concept of 'cut' which is either an existing vertex or a edge.

Input can either be

list of cut vertices and list of cut edges. Constructs cell circumference walks ('cellLoops').
list of cell circumference walks. Will filter them so they don't overlap.
cellWalker and list of cells to refine (refineCell). Constructs cellLoops and does B. cellWalker is class which can cut a single cell using a plane through the cell centre and in a certain normal direction

CellCuts constructed from cellLoops (B, C) can have multiple cut-edges and/or cut-point as long as there is per face only one (or none) cut across a face, i.e. a face can only be split into two faces.

The information available after construction:

pointIsCut, edgeIsCut.
faceSplitCut : the cross-cut of a face.
cellLoops : the loop which cuts across a cell
cellAnchorPoints : per cell the vertices on one side which are considered the anchor points.

AnchorPoints: connected loops have to be oriented in the same way to be able to grow new internal faces out of the same bottom faces. (limitation of the mapping procedure). The loop is cellLoop is oriented such that the normal of it points towards the anchorPoints. This is the only routine which uses geometric information.

Limitations:

cut description is very precise. Hard to get right.
do anchor points need to be unique per cell? Very inefficient.
is orientation guaranteed to be correct? Uses geometric info so can go wrong on highly distorted meshes.
is memory inefficient. Probably need to use Maps instead of labelLists.

Source files

Definition at line 110 of file cellCuts.H.

Constructor & Destructor Documentation

◆ cellCuts() [1/6]

cellCuts	(	const polyMesh &	mesh,
		const labelList &	cutCells,
		const labelList &	meshVerts,
		const labelList &	meshEdges,
		const scalarField &	meshEdgeWeights,
		const bool	verbose = `true`
	)

Construct from cells to cut and pattern of cuts.

Definition at line 2872 of file cellCuts.C.

References Foam::check(), Foam::expressions::patchExpr::debug, Foam::endl(), and Foam::Pout.

Here is the call graph for this function:

◆ cellCuts() [2/6]

cellCuts	(	const polyMesh &	mesh,
		const labelList &	meshVerts,
		const labelList &	meshEdges,
		const scalarField &	meshEdgeWeights,
		const bool	verbose = `true`
	)

Construct from pattern of cuts. Detect cells to cut.

Definition at line 2917 of file cellCuts.C.

References Foam::check(), Foam::expressions::patchExpr::debug, Foam::endl(), Foam::identity(), mesh, primitiveMesh::nCells(), and Foam::Pout.

Here is the call graph for this function:

◆ cellCuts() [3/6]

cellCuts	(	const polyMesh &	mesh,
		const labelList &	cellLabels,
		const labelListList &	cellLoops,
		const List< scalarField > &	cellEdgeWeights,
		const bool	verbose = `true`
	)

Construct from complete cellLoops through specified cells.

Checks for consistency. Constructs cut-cut addressing and cellAnchorPoints.

Definition at line 2966 of file cellCuts.C.

References Foam::check(), Foam::expressions::patchExpr::debug, Foam::endl(), and Foam::Pout.

Here is the call graph for this function:

◆ cellCuts() [4/6]

cellCuts	(	const polyMesh &	mesh,
		const cellLooper &	cellCutter,
		const List< refineCell > &	refCells,
		const bool	verbose = `true`
	)

Construct from list of cells to cut and direction to cut in.

(always through cell centre) and celllooper.

Definition at line 3014 of file cellCuts.C.

References Foam::check(), Foam::expressions::patchExpr::debug, Foam::endl(), and Foam::Pout.

Here is the call graph for this function:

◆ cellCuts() [5/6]

cellCuts	(	const polyMesh &	mesh,
		const cellLooper &	cellCutter,
		const labelList &	cellLabels,
		const List< plane > &	cutPlanes,
		const bool	verbose = `true`
	)

Construct from list of cells to cut and plane to cut with and.

celllooper. (constructor above always cuts through cell centre)

Definition at line 3061 of file cellCuts.C.

References Foam::check(), Foam::expressions::patchExpr::debug, Foam::endl(), and Foam::Pout.

Here is the call graph for this function:

◆ cellCuts() [6/6]

cellCuts	(	const polyMesh &	mesh,
		const boolList &	pointIsCut,
		const boolList &	edgeIsCut,
		const scalarField &	edgeWeight,
		const Map< edge > &	faceSplitCut,
		const labelListList &	cellLoops,
		const label	nLoops,
		const labelListList &	cellAnchorPoints,
		const bool	verbose = `true`
	)

Construct from components.

Definition at line 3111 of file cellCuts.C.

References Foam::expressions::patchExpr::debug, Foam::endl(), and Foam::Pout.

Here is the call graph for this function:

◆ ~cellCuts()

~cellCuts ( )

default

Destructor.

Member Function Documentation

◆ ClassName()

ClassName ( "cellCuts" )

Runtime type information.

◆ clearOut()

void clearOut ( )

Clear out demand-driven storage.

Definition at line 3143 of file cellCuts.C.

◆ pointIsCut()

const boolList& pointIsCut ( ) const

inline

Is mesh point cut.

Definition at line 555 of file cellCuts.H.

Referenced by meshCutAndRemove::setRefinement().

Here is the caller graph for this function:

◆ edgeIsCut()

const boolList& edgeIsCut ( ) const

inline

Is edge cut.

Definition at line 561 of file cellCuts.H.

Referenced by meshCutAndRemove::setRefinement(), and meshCutter::setRefinement().

Here is the caller graph for this function:

◆ edgeWeight()

const scalarField& edgeWeight ( ) const

inline

If edge is cut gives weight (ratio between start() and end())

Definition at line 567 of file cellCuts.H.

Referenced by meshCutAndRemove::setRefinement(), and meshCutter::setRefinement().

Here is the caller graph for this function:

◆ faceCuts()

const labelListList& faceCuts ( ) const

inline

Cuts per existing face (includes those along edge of face)

Cuts in no particular order

Definition at line 574 of file cellCuts.H.

◆ faceSplitCut()

const Map<edge>& faceSplitCut ( ) const

inline

Gives for split face the two cuts that split the face into two.

Definition at line 584 of file cellCuts.H.

Referenced by meshCutAndRemove::setRefinement(), and meshCutter::setRefinement().

Here is the caller graph for this function:

◆ cellLoops()

const labelListList& cellLoops ( ) const

inline

For each cut cell the cut along the circumference.

Definition at line 590 of file cellCuts.H.

Referenced by meshCutAndRemove::setRefinement(), and meshCutter::setRefinement().

Here is the caller graph for this function:

◆ nLoops()

label nLoops ( ) const

inline

Number of valid cell loops.

Definition at line 596 of file cellCuts.H.

Referenced by refinementIterator::setRefinement(), meshCutAndRemove::setRefinement(), and meshCutter::setRefinement().

Here is the caller graph for this function:

◆ cellAnchorPoints()

const labelListList& cellAnchorPoints ( ) const

inline

For each cut cell the points on the 'anchor' side of the cell.

Definition at line 602 of file cellCuts.H.

Referenced by meshCutAndRemove::setRefinement(), and meshCutter::setRefinement().

Here is the caller graph for this function:

◆ loopPoints()

Foam::pointField loopPoints ( const label celli ) const

Returns coordinates of points on loop for given cell.

Uses cellLoops_ and edgeWeight_

Definition at line 3149 of file cellCuts.C.

References forAll.

◆ nonAnchorPoints()

Foam::labelList nonAnchorPoints	(	const labelList &	cellPoints,
		const labelList &	anchorPoints,
		const labelList &	loop
	)		const

Invert anchor point selection.

Definition at line 1330 of file cellCuts.C.

References forAll, and List< T >::setSize().

Here is the call graph for this function:

◆ flip()

void flip ( const label celli )

Flip loop for celli. Updates anchor points as well.

Definition at line 3174 of file cellCuts.C.

References mesh, and Foam::reverse().

Here is the call graph for this function:

◆ flipLoopOnly()

void flipLoopOnly ( const label celli )

Flip loop for celli. Does not update anchors. Use with care.

(only if you're sure loop orientation is wrong)

Definition at line 3191 of file cellCuts.C.

References Foam::reverse().

Here is the call graph for this function:

◆ writeOBJ() [1/2]

void writeOBJ	(	Ostream &	os,
		const pointField &	loopPoints,
		label &	vertI
	)		const

debugging:Write list of cuts to stream in OBJ format

Definition at line 3200 of file cellCuts.C.

References Foam::endl(), forAll, os(), Vector< Cmpt >::x(), Vector< Cmpt >::y(), and Vector< Cmpt >::z().

Here is the call graph for this function:

◆ writeOBJ() [2/2]

void writeOBJ ( Ostream & os ) const

debugging:Write all of cuts to stream in OBJ format

Definition at line 3226 of file cellCuts.C.

References forAll, os(), and Foam::meshTools::writeOBJ().

Here is the call graph for this function:

◆ writeCellOBJ()

void writeCellOBJ	(	const fileName &	dir,
		const label	celli
	)		const

debugging:Write edges of cell and loop

Definition at line 3240 of file cellCuts.C.

References Foam::meshTools::writeOBJ().

Here is the call graph for this function:

The documentation for this class was generated from the following files:

src/dynamicMesh/meshCut/cellCuts/cellCuts.H
src/dynamicMesh/meshCut/cellCuts/cellCuts.C

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ cellCuts() [1/6]

◆ cellCuts() [2/6]

◆ cellCuts() [3/6]

◆ cellCuts() [4/6]

◆ cellCuts() [5/6]

◆ cellCuts() [6/6]

◆ ~cellCuts()

Member Function Documentation

◆ ClassName()

◆ clearOut()

◆ pointIsCut()

◆ edgeIsCut()

◆ edgeWeight()

◆ faceCuts()

◆ faceSplitCut()

◆ cellLoops()

◆ nLoops()

◆ cellAnchorPoints()

◆ loopPoints()

◆ nonAnchorPoints()

◆ flip()

◆ flipLoopOnly()

◆ writeOBJ() [1/2]

◆ writeOBJ() [2/2]

◆ writeCellOBJ()