cutCellPLIC.H

Go to the documentation of this file.

/*---------------------------------------------------------------------------*\
  =========                 |
  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   \\    /   O peration     |
    \\  /    A nd           | www.openfoam.com
     \\/     M anipulation  |
-------------------------------------------------------------------------------
    Copyright (C) 2016-2017 DHI
    Copyright (C) 2018-2019 Johan Roenby
    Copyright (C) 2019-2020 DLR
-------------------------------------------------------------------------------
License
    This file is part of OpenFOAM.
 
    OpenFOAM is free software: you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
 
    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
    for more details.
 
    You should have received a copy of the GNU General Public License
    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
 
Class
    Foam::cutCellPLIC
 
Description
    Class for cutting a cell, cellI, of an fvMesh, mesh_, at its intersection
    with an surface defined by a normal and cutValue_ (defined as distance to
    the cell centre).
 
    Reference:
    \verbatim
        Henning Scheufler, Johan Roenby,
        Accurate and efficient surface reconstruction from volume
        fraction data on general meshes,
        Journal of Computational Physics, 2019,
        doi 10.1016/j.jcp.2019.01.009
 
    \endverbatim
 
 
    Original code supplied by Henning Scheufler, DLR (2019)
 
SourceFiles
    cutCellPLIC.C
 
\*---------------------------------------------------------------------------*/
 
#ifndef cutCellPLIC_H
#define cutCellPLIC_H
 
#include "cutCell.H"
#include "cutFacePLIC.H"
#include "fvMesh.H"
#include "surfaceFields.H"
#include "volFields.H"
 
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
namespace Foam
{
 
/*---------------------------------------------------------------------------*\
                        Class cutCellPLIC Declaration
\*---------------------------------------------------------------------------*/
 
class cutCellPLIC
:
    public cutCell
{
    // Private Data
 
        //- Mesh whose cells and faces to cut at their intersection with an
        //  isosurface.
        const fvMesh& mesh_;
 
        //- Cell to cut
        label cellI_;
 
        //- Normal of the cutting plane
        vector normal_;
 
        //- Cutvalue used to cut cell
        scalar cutValue_;
 
        //- An cutFacePLIC object to get access to its face cutting functionality
        cutFacePLIC cutFace_;
 
        //- List of face centres for CutFaces
        DynamicList<point> cutFaceCentres_;
 
        //- List of face area vectors for PLICCutFaces
        DynamicList<vector> cutFaceAreas_;
 
        //- Storage for subFace edges belonging to PLICFace
        DynamicList<DynamicList<point>> plicFaceEdges_;
 
        //- Points constituting the cell-PLICsurface intersection (isoface)
        DynamicList<point> facePoints_;
 
        //- Face centre of the cutFace
        point faceCentre_;
 
        //- Face normal of the PLICface by convention pointing from high to low
        //  values (i.e. opposite of the gradient vector).
        vector faceArea_;
 
        //- Cell centre of the subcell of celli which is "fully submerged", i.e.
        //  where the function value is higher than the isoValue_
        point subCellCentre_;
 
        //- Volume of fully submerged subcell
        scalar subCellVolume_;
 
        //- Volume of Fluid for cellI (subCellVolume_/mesh_.V()[cellI])
        scalar VOF_;
 
        //- A cell status label taking one of the values:
        //
        //   -1: cell is fully below the PLICsurface
        //    0: cell is cut
        //   +1: cell is fully above the PLICsurface
        label cellStatus_;
 
 
  public:
 
    // Constructors
 
        //- Construct from fvMesh
        explicit cutCellPLIC(const fvMesh& mesh);
 
 
    // Member Functions
 
        //- Sets internal values and returns face status
        label calcSubCell
        (
            const label celli,
            const scalar cutValue,
            const vector& normal
        );
 
        //- Returns subCellCentre
        const point& subCellCentre() const;
 
        //- Returns subCellVolume
        scalar subCellVolume() const;
 
        //- Returns the points of the cutting PLICface
        const DynamicList<point>& facePoints();
 
        //- Returns the centre of the cutting PLICface
        const point& faceCentre() const;
 
        //- Returns the area normal vector of the cutting PLICface
        const vector& faceArea() const;
 
        //- Returns cellStatus
        label cellStatus() const;
 
        //- Returns volume of fluid value
        scalar VolumeOfFluid() const;
 
        //- Returns cutValue
        scalar cutValue() const;
 
        //- Resets internal values
        void clearStorage();
};
 
 
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
} // End namespace Foam
 
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
#endif
 
// ************************************************************************* //