|
class | acousticDampingSource |
| Acoustic damping source. More...
|
|
class | actuationDiskSource |
| Applies sources on velocity, i.e. U , to enable actuator disk models for aero/hydro thrust loading of horizontal axis turbines on surrounding flow field in terms of energy conversion processes. More...
|
|
class | atmAmbientTurbSource |
| Applies sources on k and either epsilon or omega to prevent them droping below a specified ambient value for atmospheric boundary layer modelling. Such adjustment reportedly increases numerical stability for very stable atmospheric stability conditions, and prevents nonphysical oscillations in regions of low shear at higher altitudes. More...
|
|
class | atmBuoyancyTurbSource |
| Applies sources on k and either epsilon or omega to incorporate effects of buoyancy for atmospheric boundary layer modelling. More...
|
|
class | atmCoriolisUSource |
| Applies corrections to incorporate the horizontal and vertical components of the Coriolis force for which the rotating frame is Earth. More...
|
|
class | atmLengthScaleTurbSource |
| Applies sources on either epsilon or omega to correct mixing-length scale estimations for atmospheric boundary layer modelling. More...
|
|
class | atmNutSource |
| Adds/subtracts a given artificial turbulent viscosity field to/from nut for atmospheric boundary layer modelling. More...
|
|
class | atmPlantCanopyTSource |
| Applies sources on temperature, i.e. T , to incorporate effects of plant canopy for atmospheric boundary layer modelling. More...
|
|
class | atmPlantCanopyTurbSource |
| Applies sources on either epsilon or omega to incorporate effects of plant canopy for atmospheric boundary layer modelling. More...
|
|
class | atmPlantCanopyUSource |
| Applies sources on velocity, i.e. U , to incorporate effects of plant canopy for atmospheric boundary layer modelling. More...
|
|
class | backwardDdtScheme |
| Second-order backward-differencing ddt using the current and two previous time-step values. More...
|
|
class | boundedConvectionScheme |
| Bounded form of the selected convection scheme. More...
|
|
class | boundedDdtScheme |
| Bounded form of the selected ddt scheme. More...
|
|
class | buoyancyEnergy |
| Calculates and applies the buoyancy energy source rho*(U&g) to the energy equation. More...
|
|
class | buoyancyForce |
| Calculates and applies the buoyancy force rho*g to the momentum equation corresponding to the specified velocity field. More...
|
|
class | cellLimitedGrad |
| cellLimitedGrad gradient scheme applied to a runTime selected base gradient scheme. More...
|
|
class | cellMDLimitedGrad |
| cellMDLimitedGrad gradient scheme applied to a runTime selected base gradient scheme. More...
|
|
class | cellSetOption |
| Cell-set options abstract base class. Provides a base set of controls, e.g.: More...
|
|
class | CentredFitSnGradScheme |
|
class | CodedSource |
|
class | CoEulerDdtScheme |
| Courant number limited first-order Euler implicit/explicit ddt. More...
|
|
class | constantHeatTransfer |
| Constant heat transfer model. htcConst [W/m2/K] and area/volume [1/m] must be provided. More...
|
|
class | convectionScheme |
| Abstract base class for convection schemes. More...
|
|
class | correctedSnGrad |
| Simple central-difference snGrad scheme with non-orthogonal correction. More...
|
|
class | CrankNicolsonDdtScheme |
| Second-oder Crank-Nicolson implicit ddt using the current and previous time-step fields as well as the previous time-step ddt. More...
|
|
class | d2dt2Scheme |
| Abstract base class for finite volume d2dt2 schemes. More...
|
|
class | ddtScheme |
| Abstract base class for ddt schemes. More...
|
|
class | ddtSchemeBase |
| Non-templated base class for ddt schemes. More...
|
|
class | directionalPressureGradientExplicitSource |
| Creates an explicit pressure gradient source in such a way to deflect the flow towards an specific direction (flowDir). Alternatively add an extra pressure drop in the flowDir direction using a model. More...
|
|
class | divScheme |
| Abstract base class for div schemes. More...
|
|
class | effectivenessHeatExchangerSource |
| Heat exchanger source model, in which the heat exchanger is defined as an energy source using a selection of cells. More...
|
|
class | EulerD2dt2Scheme |
| First-order Euler implicit d2dt2 using the current and two previous time-step values. More...
|
|
class | EulerDdtScheme |
| Basic first-order Euler implicit/explicit ddt using only the current and previous time-step values. More...
|
|
class | explicitPorositySource |
| Explicit porosity source. More...
|
|
class | faceCorrectedSnGrad |
| Simple central-difference snGrad scheme with non-orthogonal correction. More...
|
|
class | faceLimitedGrad |
| faceLimitedGrad gradient scheme applied to a runTime selected base gradient scheme. More...
|
|
class | faceMDLimitedGrad |
| faceMDLimitedGrad gradient scheme applied to a runTime selected base gradient scheme. More...
|
|
class | fixedTemperatureConstraint |
| Fixed temperature equation constraint. More...
|
|
class | FixedValueConstraint |
| Constrain the field values within a specified region. More...
|
|
class | fourthGrad |
| Second-order gradient scheme using least-squares. More...
|
|
class | gaussConvectionScheme |
| Basic second-order convection using face-gradients and Gauss' theorem. More...
|
|
class | gaussDivScheme |
| Basic second-order div using face-gradients and Gauss' theorem. More...
|
|
class | gaussGrad |
| Basic second-order gradient scheme using face-interpolation and Gauss' theorem. More...
|
|
class | gaussLaplacianScheme |
| Basic second-order laplacian using face-gradients and Gauss' theorem. More...
|
|
class | gradScheme |
| Abstract base class for gradient schemes. More...
|
|
class | interRegionExplicitPorositySource |
| Inter-region explicit porosity source. More...
|
|
class | interRegionHeatTransferModel |
| Base class for inter region heat exchange. The derived classes must provide the heat transfer coeffisine (htc) which is used as follows in the energy equation. More...
|
|
class | interRegionOption |
| Base class for inter-region exchange. More...
|
|
class | IOoptionListAdjoint |
| IOoptionListAdjoint. More...
|
|
class | jouleHeatingSource |
| Evolves an electrical potential equation. More...
|
|
class | laplacianScheme |
| Abstract base class for laplacian schemes. More...
|
|
class | LeastSquaresGrad |
| Gradient calculated using weighted least-squares on an arbitrary stencil. The stencil type is provided via a template argument and any cell-based stencil is supported: More...
|
|
class | leastSquaresGrad |
| Second-order gradient scheme using least-squares. More...
|
|
class | LeastSquaresVectors |
| Least-squares gradient scheme vectors. More...
|
|
class | limitedSnGrad |
| Run-time selected snGrad scheme with limited non-orthogonal correction. More...
|
|
class | limitTemperature |
| Correction for temperature to apply limits between minimum and maximum values. More...
|
|
class | limitVelocity |
| Limits the maximum velocity magnitude to the specified max value. More...
|
|
class | localEulerDdt |
|
class | localEulerDdtScheme |
| Local time-step first-order Euler implicit/explicit ddt. More...
|
|
class | meanVelocityForce |
| Calculates and applies the force necessary to maintain the specified mean velocity. More...
|
|
class | multiphaseMangrovesSource |
|
class | multiphaseMangrovesTurbulenceModel |
|
class | multiphaseStabilizedTurbulence |
| Applies corrections to the turbulence kinetic energy equation and turbulence viscosity field for incompressible multiphase flow cases. More...
|
|
class | multivariateGaussConvectionScheme |
| Basic second-order convection using face-gradients and Gauss' theorem. More...
|
|
class | option |
| Finite volume options abstract base class. Provides a base set of controls, e.g.: More...
|
|
class | optionAdjoint |
| Similar to fv::option but with additional functionality to contribute to the sensitivity deriavtives. More...
|
|
class | optionAdjointList |
|
class | optionList |
| List of finite volume options. More...
|
|
class | options |
| Finite-volume options. More...
|
|
class | orthogonalSnGrad |
| Simple central-difference snGrad scheme using the cell-centre to cell-centre delta-coefficients. More...
|
|
class | patchMeanVelocityForce |
| Calculates and applies the force necessary to maintain the specified mean velocity averaged over the specified patch. More...
|
|
class | PhaseLimitStabilization |
| Stabilization source for phase transport equations. More...
|
|
class | radialActuationDiskSource |
| Applies sources on U to enable actuator disk models with radial thrust distribution for aero/hydro thrust loading of horizontal axis turbines on surrounding flow field in terms of energy conversion processes. More...
|
|
class | radiation |
| Calculates and applies the radiation source to the energy equation. More...
|
|
class | rotorDiskSource |
| Rotor disk source. More...
|
|
class | SemiImplicitSource |
| Semi-implicit source, described using an input dictionary. The injection rate coefficients are specified as pairs of Su-Sp coefficients, i.e. More...
|
|
class | skewCorrectedSnGrad |
| Simple central-difference snGrad scheme with non-orthogonal correction. More...
|
|
class | SLTSDdtScheme |
| Stabilised local time-step first-order Euler implicit/explicit ddt. The time-step is adjusted locally so that an advective equations remains diagonally dominant. More...
|
|
class | snGradScheme |
| Abstract base class for snGrad schemes. More...
|
|
class | solidificationMeltingSource |
| This source is designed to model the effect of solidification and melting processes, e.g. windhield defrosting. The phase change occurs at the melting temperature, Tmelt . More...
|
|
class | steadyStateD2dt2Scheme |
| SteadyState d2dt2 which returns 0. More...
|
|
class | steadyStateDdtScheme |
| SteadyState implicit/explicit ddt which returns 0. More...
|
|
class | tabulatedAccelerationSource |
| Solid-body 6-DoF acceleration source. More...
|
|
class | tabulatedHeatTransfer |
| Tabulated heat transfer model. The heat exchange area per unit volume must be provided. The 2D table returns the heat transfer coefficient by querying the local and neighbour region velocities. More...
|
|
class | tabulatedNTUHeatTransfer |
| Tabulated heat transfer model. More...
|
|
class | uncorrectedSnGrad |
| Simple central-difference snGrad scheme using the non-orthogonal mesh delta-coefficients but without non-orthogonal correction. More...
|
|
class | variableHeatTransfer |
| Variable heat transfer model depending on local values. The area of contact between regions (area) must be provided. The Nu number is calculated as: More...
|
|
class | velocityDampingConstraint |
| Constraint on velocity field to dampen velocity fluctuations. More...
|
|
class | viscousDissipation |
| Calculates and applies the viscous dissipation energy source to the energy equation. More...
|
|
class | VoFSolidificationMeltingSource |
| Solidification and melting model for VoF simulations. More...
|
|
|
| defineTypeNameAndDebug (atmAmbientTurbSource, 0) |
|
| addToRunTimeSelectionTable (option, atmAmbientTurbSource, dictionary) |
|
| defineTypeNameAndDebug (atmBuoyancyTurbSource, 0) |
|
| addToRunTimeSelectionTable (option, atmBuoyancyTurbSource, dictionary) |
|
| defineTypeNameAndDebug (atmCoriolisUSource, 0) |
|
| addToRunTimeSelectionTable (option, atmCoriolisUSource, dictionary) |
|
| defineTypeNameAndDebug (atmLengthScaleTurbSource, 0) |
|
| addToRunTimeSelectionTable (option, atmLengthScaleTurbSource, dictionary) |
|
| defineTypeNameAndDebug (atmNutSource, 0) |
|
| addToRunTimeSelectionTable (option, atmNutSource, dictionary) |
|
| defineTypeNameAndDebug (atmPlantCanopyTSource, 0) |
|
| addToRunTimeSelectionTable (option, atmPlantCanopyTSource, dictionary) |
|
| defineTypeNameAndDebug (atmPlantCanopyTurbSource, 0) |
|
| addToRunTimeSelectionTable (option, atmPlantCanopyTurbSource, dictionary) |
|
| defineTypeNameAndDebug (atmPlantCanopyUSource, 0) |
|
| addToRunTimeSelectionTable (option, atmPlantCanopyUSource, dictionary) |
|
| defineTypeNameAndDebug (option, 0) |
|
| defineRunTimeSelectionTable (option, dictionary) |
|
| defineTypeNameAndDebug (optionList, 0) |
|
| defineTypeNameAndDebug (options, 0) |
|
| defineTemplateRunTimeSelectionTable (convectionScheme< scalar >, Istream) |
|
| defineTemplateRunTimeSelectionTable (convectionScheme< scalar >, Multivariate) |
|
| defineTemplateRunTimeSelectionTable (convectionScheme< vector >, Istream) |
|
| defineTemplateRunTimeSelectionTable (convectionScheme< vector >, Multivariate) |
|
| defineTemplateRunTimeSelectionTable (convectionScheme< sphericalTensor >, Istream) |
|
| defineTemplateRunTimeSelectionTable (convectionScheme< sphericalTensor >, Multivariate) |
|
| defineTemplateRunTimeSelectionTable (convectionScheme< symmTensor >, Istream) |
|
| defineTemplateRunTimeSelectionTable (convectionScheme< symmTensor >, Multivariate) |
|
| defineTemplateRunTimeSelectionTable (convectionScheme< tensor >, Istream) |
|
| defineTemplateRunTimeSelectionTable (convectionScheme< tensor >, Multivariate) |
|
| defineTemplateRunTimeSelectionTable (d2dt2Scheme< scalar >, Istream) |
|
| defineTemplateRunTimeSelectionTable (d2dt2Scheme< vector >, Istream) |
|
| defineTemplateRunTimeSelectionTable (d2dt2Scheme< sphericalTensor >, Istream) |
|
| defineTemplateRunTimeSelectionTable (d2dt2Scheme< symmTensor >, Istream) |
|
| defineTemplateRunTimeSelectionTable (d2dt2Scheme< tensor >, Istream) |
|
template<class Type > |
const FieldField< fvPatchField, Type > & | ff (const FieldField< fvPatchField, Type > &bf) |
|
| defineTemplateRunTimeSelectionTable (ddtScheme< scalar >, Istream) |
|
| defineTemplateRunTimeSelectionTable (ddtScheme< vector >, Istream) |
|
| defineTemplateRunTimeSelectionTable (ddtScheme< sphericalTensor >, Istream) |
|
| defineTemplateRunTimeSelectionTable (ddtScheme< symmTensor >, Istream) |
|
| defineTemplateRunTimeSelectionTable (ddtScheme< tensor >, Istream) |
|
| defineTemplateRunTimeSelectionTable (divScheme< vector >, Istream) |
|
| defineTemplateRunTimeSelectionTable (divScheme< sphericalTensor >, Istream) |
|
| defineTemplateRunTimeSelectionTable (divScheme< symmTensor >, Istream) |
|
| defineTemplateRunTimeSelectionTable (divScheme< tensor >, Istream) |
|
| NamespaceName ("fv") |
|
| defineTemplateRunTimeSelectionTable (gradScheme< scalar >, Istream) |
|
| defineTemplateRunTimeSelectionTable (gradScheme< vector >, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemescalarscalar, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemescalarsymmTensor, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemescalartensor, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemevectorscalar, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemevectorsymmTensor, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemevectortensor, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemesphericalTensorscalar, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemesphericalTensorsymmTensor, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemesphericalTensortensor, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemesymmTensorscalar, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemesymmTensorsymmTensor, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemesymmTensortensor, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemetensorscalar, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemetensorsymmTensor, Istream) |
|
| defineTemplateRunTimeSelectionTable (laplacianSchemetensortensor, Istream) |
|
| defineTemplateRunTimeSelectionTable (snGradScheme< scalar >, Mesh) |
|
| defineTemplateRunTimeSelectionTable (snGradScheme< vector >, Mesh) |
|
| defineTemplateRunTimeSelectionTable (snGradScheme< sphericalTensor >, Mesh) |
|
| defineTemplateRunTimeSelectionTable (snGradScheme< symmTensor >, Mesh) |
|
| defineTemplateRunTimeSelectionTable (snGradScheme< tensor >, Mesh) |
|
| defineTypeNameAndDebug (cellSetOption, 0) |
|
| defineTypeNameAndDebug (fixedTemperatureConstraint, 0) |
|
| addToRunTimeSelectionTable (option, fixedTemperatureConstraint, dictionary) |
|
| defineTypeNameAndDebug (velocityDampingConstraint, 0) |
|
| addToRunTimeSelectionTable (option, velocityDampingConstraint, dictionary) |
|
| defineTypeNameAndDebug (limitTemperature, 0) |
|
| addToRunTimeSelectionTable (option, limitTemperature, dictionary) |
|
| defineTypeNameAndDebug (limitVelocity, 0) |
|
| addToRunTimeSelectionTable (option, limitVelocity, dictionary) |
|
| defineTypeNameAndDebug (interRegionOption, 0) |
|
| defineTypeNameAndDebug (acousticDampingSource, 0) |
|
| addToRunTimeSelectionTable (option, acousticDampingSource, dictionary) |
|
| defineTypeNameAndDebug (actuationDiskSource, 0) |
|
| addToRunTimeSelectionTable (option, actuationDiskSource, dictionary) |
|
| defineTypeNameAndDebug (buoyancyEnergy, 0) |
|
| addToRunTimeSelectionTable (option, buoyancyEnergy, dictionary) |
|
| defineTypeNameAndDebug (buoyancyForce, 0) |
|
| addToRunTimeSelectionTable (option, buoyancyForce, dictionary) |
|
| defineTypeNameAndDebug (directionalPressureGradientExplicitSource, 0) |
|
| addToRunTimeSelectionTable (option, directionalPressureGradientExplicitSource, dictionary) |
|
| defineTypeNameAndDebug (effectivenessHeatExchangerSource, 0) |
|
| addToRunTimeSelectionTable (option, effectivenessHeatExchangerSource, dictionary) |
|
| defineTypeNameAndDebug (explicitPorositySource, 0) |
|
| addToRunTimeSelectionTable (option, explicitPorositySource, dictionary) |
|
| defineTypeNameAndDebug (jouleHeatingSource, 0) |
|
| addToRunTimeSelectionTable (option, jouleHeatingSource, dictionary) |
|
| defineTypeNameAndDebug (meanVelocityForce, 0) |
|
| addToRunTimeSelectionTable (option, meanVelocityForce, dictionary) |
|
| defineTypeNameAndDebug (patchMeanVelocityForce, 0) |
|
| addToRunTimeSelectionTable (option, patchMeanVelocityForce, dictionary) |
|
| defineTypeNameAndDebug (multiphaseStabilizedTurbulence, 0) |
|
| addToRunTimeSelectionTable (option, multiphaseStabilizedTurbulence, dictionary) |
|
| defineTypeNameAndDebug (radialActuationDiskSource, 0) |
|
| addToRunTimeSelectionTable (option, radialActuationDiskSource, dictionary) |
|
| defineTypeNameAndDebug (rotorDiskSource, 0) |
|
| addToRunTimeSelectionTable (option, rotorDiskSource, dictionary) |
|
| defineTypeNameAndDebug (solidificationMeltingSource, 0) |
|
| addToRunTimeSelectionTable (option, solidificationMeltingSource, dictionary) |
|
| defineTypeNameAndDebug (tabulatedAccelerationSource, 0) |
|
| addToRunTimeSelectionTable (option, tabulatedAccelerationSource, dictionary) |
|
| defineTypeNameAndDebug (viscousDissipation, 0) |
|
| addToRunTimeSelectionTable (option, viscousDissipation, dictionary) |
|
template<class Type > |
Ostream & | operator<< (Ostream &, const SemiImplicitSource< Type > &) |
|
| defineTypeNameAndDebug (interRegionExplicitPorositySource, 0) |
|
| addToRunTimeSelectionTable (option, interRegionExplicitPorositySource, dictionary) |
|
| defineTypeNameAndDebug (constantHeatTransfer, 0) |
|
| addToRunTimeSelectionTable (option, constantHeatTransfer, dictionary) |
|
| defineTypeNameAndDebug (interRegionHeatTransferModel, 0) |
|
| defineTypeNameAndDebug (tabulatedHeatTransfer, 0) |
|
| addToRunTimeSelectionTable (option, tabulatedHeatTransfer, dictionary) |
|
| defineTypeNameAndDebug (tabulatedNTUHeatTransfer, 0) |
|
| addToRunTimeSelectionTable (option, tabulatedNTUHeatTransfer, dictionary) |
|
| defineTypeNameAndDebug (variableHeatTransfer, 0) |
|
| addToRunTimeSelectionTable (option, variableHeatTransfer, dictionary) |
|
| defineTypeNameAndDebug (optionAdjoint, 0) |
|
| defineRunTimeSelectionTable (optionAdjoint, dictionary) |
|
| defineTypeNameAndDebug (optionAdjointList, 0) |
|
| defineTypeNameAndDebug (radiation, 0) |
|
| addToRunTimeSelectionTable (option, radiation, dictionary) |
|
| defineTypeNameAndDebug (multiphaseMangrovesSource, 0) |
|
| addToRunTimeSelectionTable (option, multiphaseMangrovesSource, dictionary) |
|
| defineTypeNameAndDebug (multiphaseMangrovesTurbulenceModel, 0) |
|
| addToRunTimeSelectionTable (option, multiphaseMangrovesTurbulenceModel, dictionary) |
|
Namespace for finite-volume.