Foam::blockEdges Namespace Reference

Classes
class	arcEdge
	Defines the arcEdge of a circle in terms of 3 points on its circumference. More...
class	bezier
	Nth order bezier curve edge. Only interior control points should be specified. The outer points are taken as start and end. Note that the calculation of each point takes 0(N^2) time, where N is the number of control points. This edge type shouldn't therefore be used for finely discretised line data; polyLine or similar will be more appropriate for such cases. Beziers are useful for simple curved shapes such as aerofoils, or when you want an edge to match a specific direction at one, or both, or its endpoints. In comparison with BSplines, the grading of bezier edges should be smoother, and the code is much simpler. The algorithmic order is worse, however, and the edge will not follow the control points as closely. More...
class	BSplineEdge
	A blockEdge interface for B-splines. More...
class	lineEdge
	A straight edge between the start point and the end point. More...
class	polyLineEdge
	A blockEdge defined in terms of a series of straight line segments. More...
class	splineEdge
	A blockEdge interface for Catmull-Rom splines. More...

Functions
	defineTypeNameAndDebug (arcEdge, 0)
	addToRunTimeSelectionTable (blockEdge, arcEdge, Istream)
	defineTypeNameAndDebug (bezier, 0)
	addToRunTimeSelectionTable (blockEdge, bezier, Istream)
	defineTypeNameAndDebug (BSplineEdge, 0)
	addToRunTimeSelectionTable (blockEdge, BSplineEdge, Istream)
	defineTypeNameAndDebug (lineEdge, 0)
	addToRunTimeSelectionTable (blockEdge, lineEdge, Istream)
	defineTypeNameAndDebug (polyLineEdge, 0)
	addToRunTimeSelectionTable (blockEdge, polyLineEdge, Istream)
	defineTypeNameAndDebug (splineEdge, 0)
	addToRunTimeSelectionTable (blockEdge, splineEdge, Istream)

Function Documentation

defineTypeNameAndDebug() [1/6]

Foam::blockEdges::defineTypeNameAndDebug	(	arcEdge	,
		0
	)

addToRunTimeSelectionTable() [1/6]

Foam::blockEdges::addToRunTimeSelectionTable	(	blockEdge	,
		arcEdge	,
		Istream
	)

defineTypeNameAndDebug() [2/6]

Foam::blockEdges::defineTypeNameAndDebug	(	bezier	,
		0
	)

addToRunTimeSelectionTable() [2/6]

Foam::blockEdges::addToRunTimeSelectionTable	(	blockEdge	,
		bezier	,
		Istream
	)

defineTypeNameAndDebug() [3/6]

Foam::blockEdges::defineTypeNameAndDebug	(	BSplineEdge	,
		0
	)

addToRunTimeSelectionTable() [3/6]

Foam::blockEdges::addToRunTimeSelectionTable	(	blockEdge	,
		BSplineEdge	,
		Istream
	)

defineTypeNameAndDebug() [4/6]

Foam::blockEdges::defineTypeNameAndDebug	(	lineEdge	,
		0
	)

addToRunTimeSelectionTable() [4/6]

Foam::blockEdges::addToRunTimeSelectionTable	(	blockEdge	,
		lineEdge	,
		Istream
	)

defineTypeNameAndDebug() [5/6]

Foam::blockEdges::defineTypeNameAndDebug	(	polyLineEdge	,
		0
	)

addToRunTimeSelectionTable() [5/6]

Foam::blockEdges::addToRunTimeSelectionTable	(	blockEdge	,
		polyLineEdge	,
		Istream
	)

defineTypeNameAndDebug() [6/6]

Foam::blockEdges::defineTypeNameAndDebug	(	splineEdge	,
		0
	)

addToRunTimeSelectionTable() [6/6]

Foam::blockEdges::addToRunTimeSelectionTable	(	blockEdge	,
		splineEdge	,
		Istream
	)