IOoject and searching on triSurface. More...
Public Types | |
enum | readAction { localOnly, localOrGlobal, masterOnly } |
Public Types inherited from IOobject | |
enum | objectState : char { GOOD, BAD } |
Enumeration defining the valid states of an IOobject. More... | |
enum | readOption : char { MUST_READ, MUST_READ_IF_MODIFIED, READ_IF_PRESENT, NO_READ } |
Enumeration defining the read options. More... | |
enum | writeOption : char { AUTO_WRITE = 0, NO_WRITE = 1 } |
Enumeration defining the write options. More... | |
enum | fileCheckTypes : char { timeStamp, timeStampMaster, inotify, inotifyMaster } |
Enumeration defining the file checking options. More... | |
Public Types inherited from HashTable< regIOobject * > | |
typedef HashTable< regIOobject *, word, string::hash > | this_type |
The template instance used for this HashTable. More... | |
typedef word | key_type |
The second template parameter, type of keys used. More... | |
typedef regIOobject * | mapped_type |
The first template parameter, type of objects contained. More... | |
typedef regIOobject * | value_type |
Same as mapped_type for OpenFOAM HashTables. More... | |
typedef string::hash | hasher |
The third template parameter, the hash index method. More... | |
typedef regIOobject * & | reference |
Reference to the stored value_type. More... | |
typedef label | difference_type |
The type to represent the difference between two iterators. More... | |
typedef label | size_type |
The type that can represent the size of a HashTable. More... | |
using | key_iterator = key_iterator_base< iterator > |
Forward iterator returning the key. More... | |
using | const_key_iterator = key_iterator_base< const_iterator > |
Forward const iterator returning the key. More... | |
Public Types inherited from triSurface | |
typedef bool | BoundaryMesh |
Placeholder only, but do not remove - it is needed for GeoMesh. More... | |
Public Types inherited from PrimitivePatch< labelledTri, ::Foam::List, pointField, point > | |
enum | surfaceTopo |
Enumeration defining the surface type. Used in check routines. More... | |
typedef labelledTri | FaceType |
typedef ::Foam::List< labelledTri > | FaceListType |
typedef pointField | PointFieldType |
Public Types inherited from List< labelledTri > | |
typedef SubList< labelledTri > | subList |
Declare type of subList. More... | |
Public Member Functions | |
TypeName ("triSurfaceMesh") | |
Runtime type information. More... | |
triSurfaceMesh (const IOobject &, const triSurface &) | |
Construct from triSurface. More... | |
triSurfaceMesh (const IOobject &io) | |
Construct read. More... | |
triSurfaceMesh (const IOobject &io, const dictionary &dict) | |
Construct from IO and dictionary (used by searchableSurface). More... | |
triSurfaceMesh (const IOobject &io, const readAction r) | |
triSurfaceMesh (const IOobject &io, const dictionary &dict, const readAction r) | |
virtual | ~triSurfaceMesh () |
Destructor. More... | |
void | clearOut () |
Clear storage. More... | |
virtual void | movePoints (const pointField &) |
Move points. More... | |
const indexedOctree< treeDataEdge > & | edgeTree () const |
Demand driven construction of octree for boundary edges. More... | |
virtual const wordList & | regions () const |
Names of regions. More... | |
virtual bool | hasVolumeType () const |
Whether supports volume type (below) - i.e. whether is closed. More... | |
virtual volumeType | outsideVolumeType () const |
If surface is closed, what is type of points outside bounds. More... | |
virtual label | size () const |
Range of local indices that can be returned. More... | |
virtual tmp< pointField > | coordinates () const |
Get representative set of element coordinates. More... | |
virtual void | boundingSpheres (pointField ¢res, scalarField &radiusSqr) const |
Get bounding spheres (centre and radius squared). Any point. More... | |
virtual tmp< pointField > | points () const |
Get the points that define the surface. More... | |
virtual bool | overlaps (const boundBox &bb) const |
Does any part of the surface overlap the supplied bound box? More... | |
virtual void | findNearest (const pointField &sample, const scalarField &nearestDistSqr, List< pointIndexHit > &) const |
virtual void | findNearest (const pointField &sample, const scalarField &nearestDistSqr, const labelList ®ionIndices, List< pointIndexHit > &) const |
Find the nearest locations for the supplied points to a. More... | |
virtual void | findLine (const pointField &start, const pointField &end, List< pointIndexHit > &) const |
Find first intersection on segment from start to end. More... | |
virtual void | findLineAny (const pointField &start, const pointField &end, List< pointIndexHit > &) const |
Return any intersection on segment from start to end. More... | |
virtual void | findLineAll (const pointField &start, const pointField &end, List< List< pointIndexHit >> &) const |
Get all intersections in order from start to end. More... | |
virtual void | getRegion (const List< pointIndexHit > &, labelList ®ion) const |
From a set of points and indices get the region. More... | |
virtual void | getNormal (const List< pointIndexHit > &, vectorField &normal) const |
From a set of points and indices get the normal. More... | |
virtual void | getVolumeType (const pointField &points, List< volumeType > &volType) const |
Determine type (inside/outside/mixed) for point. More... | |
virtual void | setField (const labelList &values) |
WIP. Store element-wise field. More... | |
virtual void | getField (const List< pointIndexHit > &, labelList &) const |
WIP. From a set of hits (points and. More... | |
bool | writeData (Ostream &) const |
writeData function required by regIOobject but not used. More... | |
virtual bool | writeObject (IOstream::streamFormat fmt, IOstream::versionNumber ver, IOstream::compressionType cmp, const bool valid) const |
Write using given format, version and compression. More... | |
virtual bool | global () const |
Is object global. More... | |
virtual fileName | filePath () const |
Return complete path + object name if the file exists. More... | |
Public Member Functions inherited from searchableSurface | |
TypeName ("searchableSurface") | |
Runtime type information. More... | |
declareRunTimeSelectionTable (autoPtr, searchableSurface, dict,(const IOobject &io, const dictionary &dict),(io, dict)) | |
searchableSurface (const IOobject &io) | |
virtual autoPtr< searchableSurface > | clone () const |
Clone. More... | |
virtual | ~searchableSurface ()=default |
Destructor. More... | |
virtual const boundBox & | bounds () const |
Return const reference to boundBox. More... | |
virtual boundBox & | bounds () |
Return non-const access to the boundBox to allow it to be set. More... | |
virtual label | globalSize () const |
Range of global indices that can be returned. More... | |
virtual void | findNearest (const pointField &sample, const scalarField &nearestDistSqr, List< pointIndexHit > &, vectorField &normal, labelList ®ion) const |
Find nearest, normal and region. Can be overridden with. More... | |
virtual void | distribute (const List< treeBoundBox > &, const bool keepNonLocal, autoPtr< mapDistribute > &faceMap, autoPtr< mapDistribute > &pointMap) |
Set bounds of surface. Bounds currently set as list of. More... | |
Public Member Functions inherited from regIOobject | |
TypeName ("regIOobject") | |
Runtime type information. More... | |
regIOobject (const IOobject &io, const bool isTime=false) | |
regIOobject (const regIOobject &rio) | |
Copy construct. More... | |
regIOobject (const regIOobject &rio, bool registerCopy) | |
regIOobject (const word &newName, const regIOobject &, bool registerCopy) | |
regIOobject (const IOobject &io, const regIOobject &rio) | |
Copy construct with new IO parameters. More... | |
virtual | ~regIOobject () |
Destructor. More... | |
bool | checkIn () |
Add object to registry, if not already registered. More... | |
bool | checkOut () |
Remove all file watches and remove object from registry. More... | |
virtual void | addWatch () |
Add file watch on object (if registered and READ_IF_MODIFIED) More... | |
bool | ownedByRegistry () const |
Is this object owned by the registry? More... | |
void | store () |
Transfer ownership of this object to its registry. More... | |
void | release (const bool unregister=false) |
Release ownership of this object from its registry. More... | |
label | eventNo () const |
Event number at last update. More... | |
label & | eventNo () |
Event number at last update. More... | |
bool | upToDate (const regIOobject &) const |
Return true if up-to-date with respect to given object. More... | |
bool | upToDate (const regIOobject &, const regIOobject &) const |
Return true if up-to-date with respect to given objects. More... | |
bool | upToDate (const regIOobject &, const regIOobject &, const regIOobject &) const |
Return true if up-to-date with respect to given objects. More... | |
bool | upToDate (const regIOobject &, const regIOobject &, const regIOobject &, const regIOobject &) const |
Return true if up-to-date with respect to given objects. More... | |
void | setUpToDate () |
Set as up-to-date. More... | |
bool | headerOk () |
Read and check header info. More... | |
Istream & | readStream (const word &, const bool valid=true) |
Return Istream and check object type against that given. More... | |
void | close () |
Close Istream. More... | |
virtual bool | readData (Istream &) |
Virtual readData function. More... | |
virtual bool | read () |
Read object. More... | |
virtual label | addWatch (const fileName &) |
Add file watch for fileName on object if not yet watched. Return. More... | |
const labelList & | watchIndices () const |
Return file-monitoring handles. More... | |
labelList & | watchIndices () |
Return file-monitoring handles. More... | |
virtual bool | write (const bool valid=true) const |
Write using setting from DB. More... | |
void | operator= (const IOobject &) |
Public Member Functions inherited from IOobject | |
TypeName ("IOobject") | |
Runtime type information. More... | |
IOobject (const word &name, const fileName &instance, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true) | |
Construct from name, instance, registry, io options. More... | |
IOobject (const word &name, const fileName &instance, const fileName &local, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true, bool globalObject=false) | |
Construct from name, instance, local, registry, io options. More... | |
IOobject (const fileName &path, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true, bool globalObject=false) | |
Construct from path, registry, io options. More... | |
IOobject (const IOobject &io, const objectRegistry ®istry) | |
Construct as copy resetting registry. More... | |
IOobject (const IOobject &io, const word &name) | |
Construct as copy resetting name. More... | |
autoPtr< IOobject > | clone () const |
Clone. More... | |
autoPtr< IOobject > | clone (const objectRegistry ®istry) const |
Clone resetting registry. More... | |
virtual | ~IOobject ()=default |
Destructor. More... | |
const objectRegistry & | db () const |
Return the local objectRegistry. More... | |
const Time & | time () const |
Return time. More... | |
const word & | name () const |
Return name. More... | |
const word & | headerClassName () const |
Return name of the class name read from header. More... | |
word & | headerClassName () |
Return non-constant access to the class name read from header. More... | |
const string & | note () const |
Return the optional note. More... | |
string & | note () |
Return non-constant access to the optional note. More... | |
bool | registerObject () const |
Should object created with this IOobject be registered? More... | |
bool & | registerObject () |
Should object created with this IOobject be registered? More... | |
bool | globalObject () const |
Is object same for all processors? More... | |
bool & | globalObject () |
Is object same for all processors? More... | |
unsigned | labelByteSize () const |
The label byte-size, possibly read from the header. More... | |
unsigned | scalarByteSize () const |
The scalar byte-size, possibly read from the header. More... | |
bool | isHeaderClassName (const word &clsName) const |
Test if headerClassName() equals the given class name. More... | |
template<class Type > | |
bool | isHeaderClassName () const |
Test if headerClassName() equals Type::typeName. More... | |
readOption | readOpt () const |
The read option. More... | |
readOption & | readOpt () |
Non-constant access to the read option. More... | |
writeOption | writeOpt () const |
The write option. More... | |
writeOption & | writeOpt () |
Non-constant access to the write option. More... | |
word | group () const |
Return group (extension part of name) More... | |
word | member () const |
Return member (name without the extension) More... | |
const fileName & | rootPath () const |
const fileName & | caseName () const |
const fileName & | instance () const |
fileName & | instance () |
const fileName & | local () const |
fileName | path () const |
The complete path. More... | |
fileName | path (const word &instance, const fileName &local=fileName::null) const |
The complete path with alternative instance and local. More... | |
fileName | objectPath () const |
The complete path + object name. More... | |
fileName | localFilePath (const word &typeName, const bool search=true) const |
Helper for filePath that searches locally. More... | |
fileName | globalFilePath (const word &typeName, const bool search=true) const |
Helper for filePath that searches up if in parallel. More... | |
bool | readHeader (Istream &is) |
Read header. More... | |
template<class Type > | |
bool | typeHeaderOk (const bool checkType=true, const bool search=true, const bool verbose=true) |
Read header (uses typeFilePath to find file) and check its info. More... | |
template<class Type > | |
void | warnNoRereading () const |
Helper: warn that type does not support re-reading. More... | |
bool | writeHeader (Ostream &os) const |
Write header. More... | |
bool | writeHeader (Ostream &os, const word &objectType) const |
Write header. Allow override of type. More... | |
bool | good () const |
bool | bad () const |
InfoProxy< IOobject > | info () const |
Return info proxy. More... | |
void | operator= (const IOobject &io) |
template<> | |
bool | isHeaderClassName () const |
Specialization for void always returns true (no headerClassName check). More... | |
template<class StringType > | |
Foam::word | groupName (StringType name, const word &group) |
Public Member Functions inherited from objectRegistry | |
TypeName ("objectRegistry") | |
Declare type name for this IOobject. More... | |
objectRegistry (const Time &db, const label nObjects=128) | |
objectRegistry (const IOobject &io, const label nObjects=128) | |
virtual | ~objectRegistry () |
Destructor, with checkOut() for all objects that are ownedByRegistry. More... | |
const objectRegistry & | thisDb () const |
Return the object registry. More... | |
const Time & | time () const |
Return time. More... | |
const objectRegistry & | parent () const |
Return the parent objectRegistry. More... | |
virtual const fileName & | dbDir () const |
Local directory path of this objectRegistry relative to the time. More... | |
HashTable< wordHashSet > | classes () const |
A summary hash of classes used and their associated object names. More... | |
template<class MatchPredicate > | |
HashTable< wordHashSet > | classes (const MatchPredicate &matchName) const |
label | count (const char *clsName) const |
The number of objects of the given class name. More... | |
template<class MatchPredicate > | |
label | count (const MatchPredicate &matchClass) const |
The number of objects of the given class name. More... | |
template<class MatchPredicate1 , class MatchPredicate2 > | |
label | count (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
The number of objects of the given class name. More... | |
template<class Type > | |
label | count (const bool strict=false) const |
The names of objects with a class satisfying isA<Type> More... | |
template<class Type , class MatchPredicate > | |
label | count (const MatchPredicate &matchName) const |
wordList | names () const |
The names of all objects. More... | |
wordList | names (const char *clsName) const |
The names of objects with the given class name. More... | |
template<class MatchPredicate > | |
wordList | names (const MatchPredicate &matchClass) const |
The names of objects with a matching class name. More... | |
template<class MatchPredicate1 , class MatchPredicate2 > | |
wordList | names (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
template<class Type > | |
wordList | names () const |
The names of objects with a class satisfying isA<Type> . More... | |
template<class Type , class MatchPredicate > | |
wordList | names (const MatchPredicate &matchName) const |
wordList | sortedNames () const |
The sorted names of all objects. More... | |
wordList | sortedNames (const char *clsName) const |
The sorted names of objects with the given class name. More... | |
template<class MatchPredicate > | |
wordList | sortedNames (const MatchPredicate &matchClass) const |
The sorted names objects with a matching class name. More... | |
template<class MatchPredicate1 , class MatchPredicate2 > | |
wordList | sortedNames (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
template<class Type > | |
wordList | sortedNames () const |
The sorted names of objects with a class satisfying isA<Type> More... | |
template<class Type , class MatchPredicate > | |
wordList | sortedNames (const MatchPredicate &matchName) const |
const objectRegistry & | subRegistry (const word &name, const bool forceCreate=false, const bool recursive=false) const |
Lookup and return a const sub-objectRegistry. More... | |
template<class Type > | |
HashTable< const Type * > | lookupClass (const bool strict=false) const |
Return all objects with a class satisfying isA<Type> More... | |
template<class Type > | |
HashTable< Type * > | lookupClass (const bool strict=false) |
Return all objects with a class satisfying isA<Type> More... | |
bool | found (const word &name, const bool recursive=false) const |
Can the regIOobject object be found (by name). More... | |
template<class Type > | |
bool | foundObject (const word &name, const bool recursive=false) const |
Is the named Type found? More... | |
template<class Type > | |
const Type * | cfindObject (const word &name, const bool recursive=false) const |
Return const pointer to the object of the given Type. More... | |
template<class Type > | |
const Type * | findObject (const word &name, const bool recursive=false) const |
Return const pointer to the object of the given Type. More... | |
template<class Type > | |
Type * | findObject (const word &name, const bool recursive=false) |
Return non-const pointer to the object of the given Type. More... | |
template<class Type > | |
Type * | getObjectPtr (const word &name, const bool recursive=false) const |
template<class Type > | |
const Type & | lookupObject (const word &name, const bool recursive=false) const |
template<class Type > | |
Type & | lookupObjectRef (const word &name, const bool recursive=false) const |
label | getEvent () const |
Return new event number. More... | |
bool | checkIn (regIOobject *io) const |
Add a regIOobject to registry. A nullptr is ignored. More... | |
bool | checkIn (regIOobject &io) const |
Add a regIOobject to registry. More... | |
bool | checkOut (regIOobject *io) const |
bool | checkOut (regIOobject &io) const |
bool | checkOut (const word &key) const |
void | clear () |
Clear all entries from the registry. More... | |
void | clearStorage () |
Clear all entries from the registry and the table itself. More... | |
bool | erase (const iterator &iter) |
Erase an entry specified by the given iterator. More... | |
bool | erase (const word &key) |
Erase an entry specified by the given key. More... | |
label | erase (std::initializer_list< word > keys) |
Remove entries given by the listed keys. More... | |
label | erase (const UList< word > &keys) |
Remove entries given by the listed keys. More... | |
virtual void | rename (const word &newName) |
Rename. More... | |
virtual bool | modified () const |
Return true if any of the object's files have been modified. More... | |
void | readModifiedObjects () |
Read the objects that have been modified. More... | |
virtual bool | readIfModified () |
Read object if modified. More... | |
template<class Type > | |
const Type * | lookupObjectPtr (const word &name, bool recursive=false) const |
Deprecated(2018-10) find object. More... | |
template<class Type > | |
Type * | lookupObjectRefPtr (const word &name, bool recursive=false) const |
Deprecated(2018-10) get object pointer, ignoring constness. More... | |
template<class MatchPredicate > | |
Foam::HashTable< Foam::wordHashSet > | classesImpl (const objectRegistry &list, const MatchPredicate &matchName) |
template<class MatchPredicate1 , class MatchPredicate2 > | |
Foam::label | countImpl (const objectRegistry &list, const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) |
template<class Type , class MatchPredicate > | |
Foam::label | countTypeImpl (const objectRegistry &list, const MatchPredicate &matchName) |
template<class MatchPredicate1 , class MatchPredicate2 > | |
Foam::wordList | namesImpl (const objectRegistry &list, const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName, const bool doSort) |
template<class Type , class MatchPredicate > | |
Foam::wordList | namesTypeImpl (const objectRegistry &list, const MatchPredicate &matchName, const bool doSort) |
template<class MatchPredicate > | |
Foam::HashTable< Foam::wordHashSet > | classes (const MatchPredicate &matchName) const |
template<class MatchPredicate > | |
Foam::label | count (const MatchPredicate &matchClass) const |
template<class MatchPredicate1 , class MatchPredicate2 > | |
Foam::label | count (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
template<class Type , class MatchPredicate > | |
Foam::label | count (const MatchPredicate &matchName) const |
template<class Type > | |
Foam::label | count (const bool strict) const |
template<class MatchPredicate > | |
Foam::wordList | names (const MatchPredicate &matchClass) const |
template<class MatchPredicate1 , class MatchPredicate2 > | |
Foam::wordList | names (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
template<class Type > | |
Foam::wordList | names () const |
template<class Type , class MatchPredicate > | |
Foam::wordList | names (const MatchPredicate &matchName) const |
template<class MatchPredicate > | |
Foam::wordList | sortedNames (const MatchPredicate &matchClass) const |
template<class MatchPredicate1 , class MatchPredicate2 > | |
Foam::wordList | sortedNames (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
template<class Type > | |
Foam::wordList | sortedNames () const |
template<class Type , class MatchPredicate > | |
Foam::wordList | sortedNames (const MatchPredicate &matchName) const |
template<class Type > | |
Foam::HashTable< const Type * > | lookupClass (const bool strict) const |
template<class Type > | |
Foam::HashTable< Type * > | lookupClass (const bool strict) |
Public Member Functions inherited from HashTable< regIOobject * > | |
HashTable () | |
Construct null with default (128) table capacity. More... | |
HashTable (const label size) | |
Construct given initial table capacity. More... | |
HashTable (Istream &is, const label size=128) | |
Construct from Istream with default table capacity. More... | |
HashTable (const this_type &ht) | |
Copy construct. More... | |
HashTable (this_type &&rhs) | |
Move construct. More... | |
HashTable (std::initializer_list< std::pair< word, regIOobject * >> list) | |
Construct from an initializer list. More... | |
~HashTable () | |
Destructor. More... | |
label | capacity () const noexcept |
The size of the underlying table. More... | |
label | size () const noexcept |
The number of elements in table. More... | |
bool | empty () const noexcept |
True if the hash table is empty. More... | |
regIOobject * & | at (const word &key) |
Find and return a hashed entry. FatalError if it does not exist. More... | |
const regIOobject * & | at (const word &key) const |
Find and return a hashed entry. FatalError if it does not exist. More... | |
bool | found (const word &key) const |
Return true if hashed entry is found in table. More... | |
iterator | find (const word &key) |
Find and return an iterator set at the hashed entry. More... | |
const_iterator | find (const word &key) const |
Find and return an const_iterator set at the hashed entry. More... | |
const_iterator | cfind (const word &key) const |
Find and return an const_iterator set at the hashed entry. More... | |
const regIOobject * & | lookup (const word &key, const regIOobject * &deflt) const |
Return hashed entry if it exists, or return the given default. More... | |
List< word > | toc () const |
The table of contents (the keys) in unsorted order. More... | |
List< word > | sortedToc () const |
The table of contents (the keys) in sorted order. More... | |
List< word > | sortedToc (const Compare &comp) const |
Foam::List< word > | sortedToc (const Compare &comp) const |
List< word > | tocKeys (const UnaryPredicate &pred, const bool invert=false) const |
Foam::List< word > | tocKeys (const UnaryPredicate &pred, const bool invert) const |
List< word > | tocValues (const UnaryPredicate &pred, const bool invert=false) const |
Foam::List< word > | tocValues (const UnaryPredicate &pred, const bool invert) const |
List< word > | tocEntries (const BinaryPredicate &pred, const bool invert=false) const |
Foam::List< word > | tocEntries (const BinaryPredicate &pred, const bool invert) const |
label | countKeys (const UnaryPredicate &pred, const bool invert=false) const |
Count the number of keys that satisfy the unary predicate. More... | |
Foam::label | countKeys (const UnaryPredicate &pred, const bool invert) const |
label | countValues (const UnaryPredicate &pred, const bool invert=false) const |
Count the number of values that satisfy the unary predicate. More... | |
Foam::label | countValues (const UnaryPredicate &pred, const bool invert) const |
label | countEntries (const BinaryPredicate &pred, const bool invert=false) const |
Count the number of entries that satisfy the binary predicate. More... | |
Foam::label | countEntries (const BinaryPredicate &pred, const bool invert) const |
bool | emplace (const word &key, Args &&... args) |
Emplace insert a new entry, not overwriting existing entries. More... | |
bool | insert (const word &key, const regIOobject * &obj) |
Copy insert a new entry, not overwriting existing entries. More... | |
bool | insert (const word &key, regIOobject * &&obj) |
Move insert a new entry, not overwriting existing entries. More... | |
bool | set (const word &key, const regIOobject * &obj) |
Copy assign a new entry, overwriting existing entries. More... | |
bool | set (const word &key, regIOobject * &&obj) |
Move assign a new entry, overwriting existing entries. More... | |
bool | erase (const iterator &iter) |
Erase an entry specified by given iterator. More... | |
bool | erase (const word &key) |
Erase an entry specified by the given key. More... | |
label | erase (const HashTable< AnyType, word, AnyHash > &other) |
Remove table entries given by keys of the other hash-table. More... | |
label | erase (std::initializer_list< word > keys) |
Remove table entries given by the listed keys. More... | |
label | erase (InputIter first, InputIter last) |
Remove multiple entries using an iterator range of keys. More... | |
label | erase (const FixedList< word, N > &keys) |
Remove table entries given by the listed keys. More... | |
label | erase (const UList< word > &keys) |
Remove table entries given by the listed keys. More... | |
Foam::label | erase (InputIter first, InputIter last) |
Foam::label | erase (const FixedList< word, N > &keys) |
Foam::label | erase (const HashTable< AnyType, word, AnyHash > &other) |
label | retain (const HashTable< AnyType, word, AnyHash > &other) |
Retain table entries given by keys of the other hash-table. More... | |
Foam::label | retain (const HashTable< AnyType, word, AnyHash > &other) |
label | filterKeys (const UnaryPredicate &pred, const bool pruning=false) |
Generalized means to filter table entries based on their keys. More... | |
Foam::label | filterKeys (const UnaryPredicate &pred, const bool pruning) |
label | filterValues (const UnaryPredicate &pred, const bool pruning=false) |
Generalized means to filter table entries based on their values. More... | |
Foam::label | filterValues (const UnaryPredicate &pred, const bool pruning) |
label | filterEntries (const BinaryPredicate &pred, const bool pruning=false) |
Generalized means to filter table entries based on their key/value. More... | |
Foam::label | filterEntries (const BinaryPredicate &pred, const bool pruning) |
void | resize (const label sz) |
Resize the hash table for efficiency. More... | |
void | clear () |
Clear all entries from table. More... | |
void | clearStorage () |
Clear the table entries and the table itself. More... | |
void | swap (HashTable< regIOobject *, word, string::hash > &rhs) |
Swap contents into this table. More... | |
void | transfer (HashTable< regIOobject *, word, string::hash > &rhs) |
Transfer contents into this table. More... | |
regIOobject * & | operator[] (const word &key) |
Find and return a hashed entry. FatalError if it does not exist. More... | |
const regIOobject * & | operator[] (const word &key) const |
Find and return a hashed entry. FatalError if it does not exist. More... | |
regIOobject * & | operator() (const word &key) |
Return existing entry or create a new entry. More... | |
regIOobject * & | operator() (const word &key, const regIOobject * &deflt) |
Return existing entry or insert a new entry. More... | |
void | operator= (const this_type &rhs) |
Copy assign. More... | |
void | operator= (std::initializer_list< std::pair< word, regIOobject * >> rhs) |
Copy assign from an initializer list. More... | |
void | operator= (this_type &&rhs) |
Move assign. More... | |
bool | operator== (const this_type &rhs) const |
bool | operator!= (const this_type &rhs) const |
The opposite of the equality operation. More... | |
this_type & | operator+= (const this_type &rhs) |
Add entries into this HashTable. More... | |
const_iterator_pair< const_key_iterator, this_type > | keys () const |
A const iterator begin/end pair for iterating over keys. More... | |
iterator | begin () |
iterator set to the beginning of the HashTable More... | |
const_iterator | begin () const |
const_iterator set to the beginning of the HashTable More... | |
const_iterator | cbegin () const |
const_iterator set to the beginning of the HashTable More... | |
const iterator & | end () |
iterator to signal the end for any HashTable More... | |
const const_iterator & | end () const |
const_iterator to signal the end for any HashTable More... | |
const const_iterator & | cend () const |
const_iterator to signal the end for any HashTable More... | |
Ostream & | printInfo (Ostream &os) const |
Print information. More... | |
Ostream & | writeKeys (Ostream &os, const label shortLen=0) const |
Public Member Functions inherited from triSurface | |
ClassName ("triSurface") | |
Runtime type information. More... | |
triSurface () | |
Construct null. More... | |
triSurface (const triSurface &surf) | |
Copy construct. More... | |
triSurface (triSurface &&surf) | |
Move construct. More... | |
triSurface (const List< labelledTri > &triangles, const geometricSurfacePatchList &patches, const pointField &pts) | |
Construct from triangles, patches, points. More... | |
triSurface (List< labelledTri > &triangles, const geometricSurfacePatchList &patches, pointField &pts, const bool reuse) | |
Construct from triangles, patches, points. Reuse storage. More... | |
triSurface (const List< labelledTri > &triangles, const pointField &pts) | |
triSurface (const triFaceList &triangles, const pointField &pts) | |
triSurface (const fileName &name, const scalar scaleFactor=-1) | |
Construct from file name (uses extension to determine type). More... | |
triSurface (const fileName &name, const word &ext, const scalar scaleFactor=-1) | |
Construct from file name (uses extension to determine type) More... | |
triSurface (Istream &is) | |
Construct from Istream. More... | |
triSurface (const Time &d) | |
Construct from objectRegistry. More... | |
virtual | ~triSurface () |
Destructor. More... | |
void | clearOut () |
void | clearTopology () |
void | clearPatchMeshAddr () |
void | swap (triSurface &surf) |
const geometricSurfacePatchList & | patches () const |
geometricSurfacePatchList & | patches () |
const List< labelledTri > & | surfFaces () const |
Return const access to the faces. More... | |
const labelListList & | sortedEdgeFaces () const |
Return edge-face addressing sorted (for edges with more than. More... | |
const labelList & | edgeOwner () const |
If 2 face neighbours: label of face where ordering of edge. More... | |
const vectorField & | Sf () const |
Face area vectors (normals) More... | |
const scalarField & | magSf () const |
Face area magnitudes. More... | |
const vectorField & | Cf () const |
Face centres. More... | |
List< surfZone > | sortedZones (labelList &faceMap) const |
Sort faces according to zoneIds. More... | |
void | triFaceFaces (List< face > &plainFaceList) const |
Create a list of faces from the triFaces. More... | |
virtual void | swapPoints (pointField &pts) |
Swap points. Similar to movePoints, but returns the old points. More... | |
virtual void | scalePoints (const scalar scaleFactor) |
Scale points. A non-positive factor is ignored. More... | |
void | checkTriangles (const bool verbose) |
Check/remove duplicate/degenerate triangles. More... | |
void | checkEdges (const bool verbose) |
Check triply (or more) connected edges. More... | |
void | cleanup (const bool verbose) |
Remove non-valid triangles. More... | |
void | markZone (const boolList &borderEdge, const label facei, const label currentZone, labelList &faceZone) const |
Fill faceZone with currentZone for every face reachable. More... | |
label | markZones (const boolList &borderEdge, labelList &faceZone) const |
(size and) fills faceZone with zone of face. Zone is area More... | |
void | subsetMeshMap (const boolList &include, labelList &pointMap, labelList &faceMap) const |
'Create' sub mesh More... | |
triSurface | subsetMesh (const boolList &include, labelList &pointMap, labelList &faceMap) const |
Return new surface. More... | |
triSurface | subsetMesh (const boolList &include) const |
Return new surface. More... | |
void | swapFaces (List< labelledTri > &faceLst) |
Swap the list of faces being addressed. More... | |
void | transfer (triSurface &surf) |
Alter contents by transferring (triangles, points) components. More... | |
void | transfer (MeshedSurface< labelledTri > &surf) |
Alter contents by transferring (triangles, points) components. More... | |
void | write (Ostream &os) const |
Write to Ostream in simple FOAM format. More... | |
void | write (const fileName &, const bool sortByRegion=false) const |
Generic write routine. Chooses writer based on extension. More... | |
void | write (const Time &d) const |
Write to database. More... | |
void | writeStats (Ostream &os) const |
Write some statistics. More... | |
void | operator= (const triSurface &surf) |
Copy assignment. More... | |
void | operator= (triSurface &&surf) |
Move assignment. More... | |
void | operator= (MeshedSurface< labelledTri > &&surf) |
Move assignment. More... | |
Public Member Functions inherited from PrimitivePatch< labelledTri, ::Foam::List, pointField, point > | |
PrimitivePatch (const ::Foam::List< labelledTri > &faces, const Field< point > &points) | |
Construct from components. More... | |
PrimitivePatch (::Foam::List< labelledTri > &&faces, const Field< point > &points) | |
Construct from components, transferring faces. More... | |
PrimitivePatch (::Foam::List< labelledTri > &faces, Field< point > &points, const bool reuse) | |
Construct from components, reuse storage. More... | |
PrimitivePatch (const PrimitivePatch< labelledTri, ::Foam::List, pointField, point > &) | |
Construct as copy. More... | |
virtual | ~PrimitivePatch () |
Destructor. More... | |
void | clearOut () |
void | clearGeom () |
void | clearTopology () |
void | clearPatchMeshAddr () |
void | swap (PrimitivePatch &)=delete |
Suppress direct swapping, since storage containers may be const. More... | |
const Field< point > & | points () const |
Return reference to global points. More... | |
label | nPoints () const |
Return number of points supporting patch faces. More... | |
label | nEdges () const |
Return number of edges in patch. More... | |
const edgeList & | edges () const |
Return list of edges, address into LOCAL point list. More... | |
label | nInternalEdges () const |
Number of internal edges. More... | |
bool | isInternalEdge (const label edgei) const |
Is internal edge? More... | |
const labelList & | boundaryPoints () const |
Return list of boundary points, address into LOCAL point list. More... | |
const labelListList & | faceFaces () const |
Return face-face addressing. More... | |
const labelListList & | edgeFaces () const |
Return edge-face addressing. More... | |
const labelListList & | faceEdges () const |
Return face-edge addressing. More... | |
const labelListList & | pointEdges () const |
Return point-edge addressing. More... | |
const labelListList & | pointFaces () const |
Return point-face addressing. More... | |
const List< labelledTri > & | localFaces () const |
Return patch faces addressing into local point list. More... | |
const labelList & | meshPoints () const |
Return labelList of mesh points in patch. More... | |
const Map< label > & | meshPointMap () const |
Mesh point map. More... | |
const Field< point > & | localPoints () const |
Return pointField of points in patch. More... | |
const labelList & | localPointOrder () const |
Return orders the local points for most efficient search. More... | |
label | whichPoint (const label gp) const |
Given a global point index, return the local point index. More... | |
label | whichEdge (const edge &) const |
labelList | meshEdges (const edgeList &allEdges, const labelListList &cellEdges, const labelList &faceCells) const |
labelList | meshEdges (const edgeList &allEdges, const labelListList &pointEdges) const |
const Field< point > & | faceCentres () const |
Return face centres for patch. More... | |
const Field< point > & | faceAreas () const |
Return face area vectors for patch. More... | |
const Field< scalar > & | magFaceAreas () const |
Return face area magnitudes for patch. More... | |
const Field< point > & | faceNormals () const |
Return face unit normals for patch. More... | |
const Field< point > & | pointNormals () const |
Return point normals for patch. More... | |
bool | hasFaceAreas () const |
bool | hasFaceCentres () const |
bool | hasFaceNormals () const |
bool | hasPointNormals () const |
List< objectHit > | projectPoints (const ToPatch &targetPatch, const Field< point > &projectionDirection, const intersection::algorithm=intersection::FULL_RAY, const intersection::direction=intersection::VECTOR) const |
Project vertices of patch onto another patch. More... | |
Foam::List< Foam::objectHit > | projectPoints (const ToPatch &targetPatch, const Field< point > &projectionDirection, const intersection::algorithm alg, const intersection::direction dir) const |
List< objectHit > | projectFaceCentres (const ToPatch &targetPatch, const Field< point > &projectionDirection, const intersection::algorithm=intersection::FULL_RAY, const intersection::direction=intersection::VECTOR) const |
Project vertices of patch onto another patch. More... | |
Foam::List< Foam::objectHit > | projectFaceCentres (const ToPatch &targetPatch, const Field< point > &projectionDirection, const intersection::algorithm alg, const intersection::direction dir) const |
const labelListList & | edgeLoops () const |
Return list of closed loops of boundary vertices. More... | |
surfaceTopo | surfaceType () const |
Calculate surface type formed by patch. More... | |
bool | checkTopology (const bool report=false, labelHashSet *setPtr=nullptr) const |
Check surface formed by patch for manifoldness (see above). More... | |
bool | checkPointManifold (const bool report=false, labelHashSet *setPtr=nullptr) const |
Checks primitivePatch for faces sharing point but not edge. More... | |
virtual void | movePoints (const Field< point > &) |
Correct patch after moving points. More... | |
void | operator= (const PrimitivePatch< labelledTri, ::Foam::List, pointField, point > &) |
Assignment. More... | |
Public Member Functions inherited from List< labelledTri > | |
constexpr | List () noexcept |
Null constructor. More... | |
List (const label len) | |
Construct with given size. More... | |
List (const label len, const labelledTri &val) | |
Construct with given size and value for all elements. More... | |
List (const label len, const zero) | |
Construct with given size initializing all elements to zero. More... | |
List (const one, const labelledTri &val) | |
Construct with length=1, copying the value as the only content. More... | |
List (const one, labelledTri &&val) | |
Construct with length=1, moving the value as the only content. More... | |
List (const one, const zero) | |
Construct with length=1, initializing content to zero. More... | |
List (const List< labelledTri > &a) | |
Copy construct from list. More... | |
List (const UList< labelledTri > &a) | |
Copy construct contents from list. More... | |
List (List< labelledTri > &a, bool reuse) | |
Construct as copy or re-use as specified. More... | |
List (const UList< labelledTri > &list, const labelUList &mapAddressing) | |
Construct as subset. More... | |
List (InputIterator begIter, InputIterator endIter) | |
Construct given begin/end iterators. More... | |
List (const FixedList< labelledTri, N > &list) | |
Construct as copy of FixedList<T, N> More... | |
List (const PtrList< labelledTri > &list) | |
Construct as copy of PtrList<T> More... | |
List (const SLList< labelledTri > &list) | |
Construct as copy of SLList<T> More... | |
List (const IndirectListBase< labelledTri, Addr > &list) | |
Construct as copy of IndirectList contents. More... | |
List (std::initializer_list< labelledTri > list) | |
Construct from an initializer list. More... | |
List (List< labelledTri > &&list) | |
Move construct from List. More... | |
List (DynamicList< labelledTri, SizeMin > &&list) | |
Move construct from DynamicList. More... | |
List (SortableList< labelledTri > &&list) | |
Move construct from SortableList. More... | |
List (SLList< labelledTri > &&list) | |
Move construct from SLList. More... | |
List (Istream &is) | |
Construct from Istream. More... | |
autoPtr< List< labelledTri > > | clone () const |
Clone. More... | |
~List () | |
Destructor. More... | |
void | resize (const label newSize) |
Adjust allocated size of list. More... | |
void | resize (const label newSize, const labelledTri &val) |
Adjust allocated size of list and set val for new elements. More... | |
void | resize (const label newSize) |
void | setSize (const label newSize) |
Alias for resize(const label) More... | |
void | setSize (const label newSize, const labelledTri &val) |
Alias for resize(const label, const T&) More... | |
void | clear () |
Clear the list, i.e. set size to zero. More... | |
void | append (const labelledTri &val) |
Append an element at the end of the list. More... | |
void | append (labelledTri &&val) |
Move append an element at the end of the list. More... | |
void | append (const UList< labelledTri > &list) |
Append a List to the end of this list. More... | |
void | append (const IndirectListBase< labelledTri, Addr > &list) |
Append IndirectList contents at the end of this list. More... | |
void | transfer (List< labelledTri > &list) |
void | transfer (DynamicList< labelledTri, SizeMin > &list) |
void | transfer (SortableList< labelledTri > &list) |
labelledTri & | newElmt (const label i) |
void | operator= (const UList< labelledTri > &a) |
Assignment to UList operator. Takes linear time. More... | |
void | operator= (const List< labelledTri > &list) |
Assignment operator. Takes linear time. More... | |
void | operator= (const SLList< labelledTri > &list) |
Assignment to SLList operator. Takes linear time. More... | |
void | operator= (const IndirectListBase< labelledTri, Addr > &list) |
Assignment from IndirectList. Takes linear time. More... | |
void | operator= (std::initializer_list< labelledTri > list) |
Assignment to an initializer list. More... | |
void | operator= (const labelledTri &val) |
Assignment of all entries to the given value. More... | |
void | operator= (const zero) |
Assignment of all entries to zero. More... | |
void | operator= (List< labelledTri > &&list) |
Move assignment. Takes constant time. More... | |
void | operator= (DynamicList< labelledTri, SizeMin > &&list) |
Move assignment. Takes constant time. More... | |
void | operator= (SortableList< labelledTri > &&list) |
Move assignment. Takes constant time. More... | |
void | operator= (SLList< labelledTri > &&list) |
Move assignment. Takes constant time. More... | |
void | shallowCopy (const UList< labelledTri > &)=delete |
No shallowCopy permitted. More... | |
std::enable_if< std::is_same< bool, TypeT >::value, bool >::type | set (const label i, bool val=true) |
A bitSet::set() method for a list of bool. More... | |
Public Member Functions inherited from triSurfaceRegionSearch | |
triSurfaceRegionSearch (const triSurface &) | |
Construct from surface. Holds reference to surface! More... | |
triSurfaceRegionSearch (const triSurface &, const dictionary &dict) | |
Construct from surface and dictionary. Holds reference to surface! More... | |
~triSurfaceRegionSearch () | |
Destructor. More... | |
void | clearOut () |
Clear storage. More... | |
const PtrList< treeType > & | treeByRegion () const |
Demand driven construction of octree for each region. More... | |
void | findNearest (const pointField &samples, const scalarField &nearestDistSqr, const labelList ®ionIndices, List< pointIndexHit > &info) const |
Find the nearest point on the surface out of the regions. More... | |
Public Member Functions inherited from triSurfaceSearch | |
triSurfaceSearch (const triSurface &surface) | |
Construct from surface. Holds reference to surface! More... | |
triSurfaceSearch (const triSurface &surface, const dictionary &dict) | |
Construct from surface and dictionary. More... | |
triSurfaceSearch (const triSurface &surface, const scalar tolerance, const label maxTreeDepth=10) | |
Construct from components. More... | |
~triSurfaceSearch () | |
Destructor. More... | |
void | clearOut () |
Clear storage. More... | |
const indexedOctree< treeDataTriSurface > & | tree () const |
Demand driven construction of the octree. More... | |
const triSurface & | surface () const |
Return reference to the surface. More... | |
scalar | tolerance () const |
Return tolerance to use in searches. More... | |
label | maxTreeDepth () const |
Return max tree depth of octree. More... | |
boolList | calcInside (const pointField &searchPoints) const |
Calculate for each searchPoint inside/outside status. More... | |
void | findNearest (const pointField &samples, const scalarField &nearestDistSqr, List< pointIndexHit > &info) const |
pointIndexHit | nearest (const point &pt, const vector &span) const |
Calculate nearest point on surface for single searchPoint. Returns. More... | |
void | findLine (const pointField &start, const pointField &end, List< pointIndexHit > &info) const |
void | findLineAny (const pointField &start, const pointField &end, List< pointIndexHit > &info) const |
void | findLineAll (const pointField &start, const pointField &end, List< List< pointIndexHit >> &info) const |
Calculate all intersections from start to end. More... | |
Static Public Attributes | |
static word | meshSubDir = "triSurface" |
Return the mesh sub-directory name (usually "triSurface") More... | |
Static Public Attributes inherited from regIOobject | |
static float | fileModificationSkew |
static int | maxFileModificationPolls |
Static Public Attributes inherited from IOobject | |
static const Enum< fileCheckTypes > | fileCheckTypesNames |
Names for the fileCheckTypes. More... | |
static fileCheckTypes | fileModificationChecking |
Type of file modification checking. More... | |
Protected Member Functions | |
bool | isSurfaceClosed () const |
Check whether surface is closed without calculating any permanent. More... | |
triSurfaceMesh (const triSurfaceMesh &)=delete | |
No copy construct. More... | |
void | operator= (const triSurfaceMesh &)=delete |
No copy assignment. More... | |
Protected Member Functions inherited from regIOobject | |
bool | readHeaderOk (const IOstream::streamFormat PstreamFormat, const word &typeName) |
Helper: check readOpt flags and read if necessary. More... | |
Istream * | objectStream () |
Construct and return an IFstream for the object. More... | |
Protected Member Functions inherited from IOobject | |
void | setBad (const string &s) |
Set the object state to bad. More... | |
Protected Member Functions inherited from HashTable< regIOobject * > | |
bool | iterator_erase (node_type *&entry, label &index) |
Low-level entry erasure using iterator internals. More... | |
Protected Member Functions inherited from triSurface | |
pointField & | storedPoints () |
Non-const access to global points. More... | |
List< Face > & | storedFaces () |
Non-const access to the faces. More... | |
Static Protected Member Functions | |
static fileName | checkFile (const IOobject &io, const bool isGlobal) |
Return fileName to load IOobject from. More... | |
static fileName | relativeFilePath (const IOobject &, const fileName &, const bool isGlobal) |
Return fileName. If fileName is relative gets treated local to. More... | |
static fileName | checkFile (const IOobject &, const dictionary &, const bool isGlobal) |
Return fileName to load IOobject from. Optional override of fileName. More... | |
static bool | addFaceToEdge (const edge &, EdgeMap< label > &) |
Helper function for isSurfaceClosed. More... | |
static void | getNextIntersections (const indexedOctree< treeDataTriSurface > &octree, const point &start, const point &end, const vector &smallVec, DynamicList< pointIndexHit > &hits) |
Steps to next intersection. Adds smallVec and starts tracking. More... | |
Protected Attributes | |
fileName | fName_ |
Supplied fileName override. More... | |
scalar | minQuality_ |
Optional min triangle quality. Triangles below this get. More... | |
autoPtr< indexedOctree< treeDataEdge > > | edgeTree_ |
Search tree for boundary edges. More... | |
wordList | regions_ |
Names of regions. More... | |
label | surfaceClosed_ |
Is surface closed. More... | |
volumeType | outsideVolType_ |
If surface is closed, what is type of outside points. More... | |
Additional Inherited Members | |
Static Public Member Functions inherited from searchableSurface | |
static autoPtr< searchableSurface > | New (const word &surfaceType, const IOobject &io, const dictionary &dict) |
Return a reference to the selected searchableSurface. More... | |
Static Public Member Functions inherited from regIOobject | |
template<class Type > | |
static Type & | store (Type *p) |
Transfer ownership of the given object pointer to its registry. More... | |
template<class Type > | |
static Type & | store (autoPtr< Type > &aptr) |
Transfer ownership of the given object pointer to its registry. More... | |
template<class Type > | |
static Type & | store (autoPtr< Type > &&aptr) |
Transfer ownership of the given object pointer to its registry. More... | |
Static Public Member Functions inherited from IOobject | |
static bool | fileNameComponents (const fileName &path, fileName &instance, fileName &local, word &name) |
Split path into instance, local, name components. More... | |
template<class StringType > | |
static word | groupName (StringType name, const word &group) |
Create dot-delimited name.group. More... | |
static word | group (const word &name) |
Return group (extension part of name) More... | |
static word | member (const word &name) |
Return member (name without the extension) More... | |
static IOobject | selectIO (const IOobject &io, const fileName &altFile, const word &ioName="") |
Return the IOobject, but also consider an alternative file name. More... | |
static Ostream & | writeBanner (Ostream &os, bool noHint=false) |
Write the standard OpenFOAM file/dictionary banner. More... | |
static Ostream & | writeDivider (Ostream &os) |
Write the standard file section divider. More... | |
static Ostream & | writeEndDivider (Ostream &os) |
Write the standard end file divider. More... | |
Static Public Member Functions inherited from triSurface | |
static fileName | triSurfInstance (const Time &) |
Name of triSurface directory to use. More... | |
static bool | canRead (const fileName &name, const bool verbose=false) |
Can we read this file format? More... | |
static bool | canReadType (const word &ext, const bool verbose=false) |
Can we read this file format? More... | |
static bool | canWriteType (const word &ext, const bool verbose=false) |
Can we write this file format? More... | |
static const wordHashSet & | readTypes () |
Known readable file-types. More... | |
static const wordHashSet & | writeTypes () |
Known writable file-types. More... | |
Static Public Member Functions inherited from List< labelledTri > | |
static const List< labelledTri > & | null () |
Return a null List. More... | |
Public Attributes inherited from HashTable< regIOobject * > | |
const typedef regIOobject * & | const_reference |
Const reference to the stored value_type. More... | |
Static Protected Attributes inherited from regIOobject | |
static bool | masterOnlyReading = false |
To flag master-only reading of objects. More... | |
IOoject and searching on triSurface.
Note: when constructing from dictionary has the following parameters:
Dictionary parameters
Property | Description | Required | Default |
---|---|---|---|
type | triSurfaceMesh | selector | |
file | File name to locate the surface | no | |
scale | Scaling factor | no | 0 |
minQuality | Quality criterion | no | -1 |
Definition at line 100 of file triSurfaceMesh.H.
enum readAction |
Enumerator | |
---|---|
localOnly | |
localOrGlobal | |
masterOnly |
Definition at line 211 of file triSurfaceMesh.H.
|
protecteddelete |
No copy construct.
triSurfaceMesh | ( | const IOobject & | io, |
const triSurface & | s | ||
) |
Construct from triSurface.
Definition at line 265 of file triSurfaceMesh.C.
References searchableSurface::bounds(), and PrimitivePatch< labelledTri, ::Foam::List, pointField, point >::points().
triSurfaceMesh | ( | const IOobject & | io | ) |
Construct read.
Definition at line 293 of file triSurfaceMesh.C.
References searchableSurface::bounds(), and PrimitivePatch< labelledTri, ::Foam::List, pointField, point >::points().
triSurfaceMesh | ( | const IOobject & | io, |
const dictionary & | dict | ||
) |
Construct from IO and dictionary (used by searchableSurface).
Dictionary may contain a 'scale' entry (eg, 0.001: mm -> m)
Definition at line 324 of file triSurfaceMesh.C.
References dict, Foam::endl(), Foam::Info, keyType::LITERAL, IOobject::name(), PrimitivePatch< labelledTri, ::Foam::List, pointField, point >::points(), dictionary::readIfPresent(), and triSurface::scalePoints().
triSurfaceMesh | ( | const IOobject & | io, |
const readAction | r | ||
) |
Definition at line 389 of file triSurfaceMesh.C.
References searchableSurface::bounds(), Foam::expressions::patchExpr::debug, Foam::endl(), IOobject::globalFilePath(), IOobject::localFilePath(), triSurfaceMesh::localOrGlobal, UPstream::master(), triSurfaceMesh::masterOnly, IOobject::NO_READ, IOobject::objectPath(), UPstream::parRun(), triSurface::patches(), PrimitivePatch< labelledTri, ::Foam::List, pointField, point >::points(), Foam::Pout, IOobject::readOpt(), Pstream::scatter(), and triSurface::transfer().
triSurfaceMesh | ( | const IOobject & | io, |
const dictionary & | dict, | ||
const readAction | r | ||
) |
Definition at line 484 of file triSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, dict, Foam::endl(), IOobject::globalFilePath(), Foam::Info, keyType::LITERAL, IOobject::localFilePath(), UPstream::master(), IOobject::name(), IOobject::NO_READ, IOobject::objectPath(), UPstream::parRun(), triSurface::patches(), PrimitivePatch< labelledTri, ::Foam::List, pointField, point >::points(), Foam::Pout, dictionary::readIfPresent(), IOobject::readOpt(), triSurface::scalePoints(), Pstream::scatter(), and triSurface::transfer().
|
virtual |
Destructor.
Definition at line 616 of file triSurfaceMesh.C.
|
staticprotected |
Return fileName to load IOobject from.
Definition at line 51 of file triSurfaceMesh.C.
References Foam::exit(), Foam::FatalError, FatalErrorInFunction, IOobject::globalFilePath(), IOobject::localFilePath(), and IOobject::objectPath().
Referenced by distributedTriSurfaceMesh::distributedTriSurfaceMesh().
|
staticprotected |
Return fileName. If fileName is relative gets treated local to.
Definition at line 74 of file triSurfaceMesh.C.
References string::expand(), f(), Foam::fileHandler(), fileOperation::filePath(), and fileName::isAbsolute().
|
staticprotected |
Return fileName to load IOobject from. Optional override of fileName.
Definition at line 99 of file triSurfaceMesh.C.
References dict, Foam::exists(), Foam::exit(), Foam::FatalError, FatalErrorInFunction, IOobject::globalFilePath(), IOobject::localFilePath(), and IOobject::objectPath().
Helper function for isSurfaceClosed.
Definition at line 142 of file triSurfaceMesh.C.
References Foam::BitOps::count(), and Foam::constant::electromagnetic::e.
Referenced by triSurfaceMesh::isSurfaceClosed().
|
protected |
Check whether surface is closed without calculating any permanent.
addressing.
Definition at line 158 of file triSurfaceMesh.C.
References triSurfaceMesh::addFaceToEdge(), List< T >::clear(), Foam::expressions::patchExpr::debug, Foam::endl(), f(), forAll, forAllConstIters(), Foam::invertManyToMany(), pFaces, PrimitivePatch< labelledTri, ::Foam::List, pointField, point >::pointFaces(), PrimitivePatch< labelledTri, ::Foam::List, pointField, point >::points(), and Foam::Pout.
|
staticprotected |
Steps to next intersection. Adds smallVec and starts tracking.
from there.
|
protecteddelete |
No copy assignment.
TypeName | ( | "triSurfaceMesh" | ) |
Runtime type information.
void clearOut | ( | ) |
Clear storage.
Definition at line 622 of file triSurfaceMesh.C.
References triSurfaceRegionSearch::clearOut(), and triSurface::clearOut().
Referenced by distributedTriSurfaceMesh::clearOut().
|
virtual |
Move points.
Reimplemented from triSurface.
Definition at line 693 of file triSurfaceMesh.C.
References triSurfaceRegionSearch::clearOut(), Foam::expressions::patchExpr::debug, Foam::endl(), regIOobject::eventNo(), IOobject::instance(), triSurface::movePoints(), PrimitivePatch< labelledTri, ::Foam::List, pointField, point >::points(), Foam::Pout, objectRegistry::time(), and Time::timeName().
const Foam::indexedOctree< Foam::treeDataEdge > & edgeTree | ( | ) | const |
Demand driven construction of octree for boundary edges.
Definition at line 726 of file triSurfaceMesh.C.
References PatchTools::calcBounds(), Foam::expressions::patchExpr::debug, Foam::constant::electromagnetic::e, Foam::endl(), treeBoundBox::extend(), Foam::identity(), boundBox::max(), boundBox::min(), nPoints, indexedOctree< Type >::perturbTol(), Foam::Pout, rndGen, and Foam::Zero.
|
virtual |
Names of regions.
Implements searchableSurface.
Definition at line 809 of file triSurfaceMesh.C.
References forAll, IOobject::name(), patches, and List< T >::setSize().
|
virtual |
Whether supports volume type (below) - i.e. whether is closed.
Reimplemented from searchableSurface.
Reimplemented in closedTriSurfaceMesh.
Definition at line 823 of file triSurfaceMesh.C.
|
virtual |
If surface is closed, what is type of points outside bounds.
Implements searchableSurface.
Definition at line 841 of file triSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, Foam::endl(), Foam::max(), volumeType::names, Foam::Pout, and volumeType::UNKNOWN.
|
inlinevirtual |
Range of local indices that can be returned.
Implements searchableSurface.
Definition at line 257 of file triSurfaceMesh.H.
|
virtual |
Get representative set of element coordinates.
Usually the element centres (should be of length size()).
Implements searchableSurface.
Definition at line 633 of file triSurfaceMesh.C.
References PrimitivePatch< Face, FaceList, PointField, PointType >::faceCentres(), tmp< T >::New(), and PrimitivePatch< labelledTri, ::Foam::List, pointField, point >::points().
|
virtual |
Get bounding spheres (centre and radius squared). Any point.
on surface is guaranteed to be inside.
Implements searchableSurface.
Definition at line 650 of file triSurfaceMesh.C.
References coordinates(), f(), forAll, Foam::magSqr(), Foam::max(), PrimitivePatch< labelledTri, ::Foam::List, pointField, point >::points(), and Foam::sqr().
|
virtual |
Get the points that define the surface.
Implements searchableSurface.
Definition at line 677 of file triSurfaceMesh.C.
References PrimitivePatch< labelledTri, ::Foam::List, pointField, point >::points().
Referenced by powerLawLopesdaCostaZone::powerLawLopesdaCostaZone(), triSurfaceMeshPointSet::triSurfaceMeshPointSet(), and searchableSurfaces::writeStats().
Does any part of the surface overlap the supplied bound box?
Implements searchableSurface.
Definition at line 683 of file triSurfaceMesh.C.
|
virtual |
Implements searchableSurface.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 876 of file triSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, Foam::endl(), triSurfaceSearch::findNearest(), Foam::max(), Foam::Pout, samples(), Foam::sqrt(), and Foam::Zero.
Referenced by distributedTriSurfaceMesh::findNearest().
|
virtual |
Find the nearest locations for the supplied points to a.
particular region in the searchable surface.
Reimplemented from searchableSurface.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 901 of file triSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, Foam::endl(), triSurfaceRegionSearch::findNearest(), Foam::max(), Foam::Pout, samples(), Foam::sqrt(), and Foam::Zero.
|
virtual |
Find first intersection on segment from start to end.
Note: searchableSurfacesQueries expects no intersection to be found if start==end. Is problem?
Implements searchableSurface.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 933 of file triSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, stdFoam::end(), Foam::endl(), triSurfaceSearch::findLine(), Foam::Pout, and Foam::start.
Referenced by distributedTriSurfaceMesh::findLine(), and powerLawLopesdaCostaZone::powerLawLopesdaCostaZone().
|
virtual |
Return any intersection on segment from start to end.
Implements searchableSurface.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 956 of file triSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, stdFoam::end(), Foam::endl(), triSurfaceSearch::findLineAny(), Foam::Pout, and Foam::start.
Referenced by distributedTriSurfaceMesh::findLineAny().
|
virtual |
Get all intersections in order from start to end.
Implements searchableSurface.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 979 of file triSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, stdFoam::end(), Foam::endl(), triSurfaceSearch::findLineAll(), Foam::Pout, and Foam::start.
Referenced by distributedTriSurfaceMesh::findLineAll(), and triSurfaceTools::writeCloseness().
|
virtual |
From a set of points and indices get the region.
Implements searchableSurface.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 1002 of file triSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, Foam::endl(), forAll, Foam::Pout, and List< T >::setSize().
|
virtual |
From a set of points and indices get the normal.
Implements searchableSurface.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 1035 of file triSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, Foam::endl(), forAll, Foam::Pout, s, and Foam::Zero.
Referenced by distributedTriSurfaceMesh::getNormal().
|
virtual |
Determine type (inside/outside/mixed) for point.
Unknown if cannot be determined (e.g. non-manifold surface)
Implements searchableSurface.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 1188 of file triSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, Foam::endl(), forAll, indexedOctree< Type >::perturbTol(), points, Foam::Pout, List< T >::setSize(), and volumeType::UNKNOWN.
Referenced by distributedTriSurfaceMesh::getVolumeType().
|
virtual |
WIP. Store element-wise field.
Reimplemented from searchableSurface.
Definition at line 1118 of file triSurfaceMesh.C.
References IOobject::AUTO_WRITE, Foam::expressions::patchExpr::debug, Foam::dimless, Foam::endl(), IOobject::NO_READ, Foam::Pout, objectRegistry::time(), timeName, and Foam::HashTableOps::values().
|
virtual |
WIP. From a set of hits (points and.
indices) get the specified field. Misses do not get set.
Reimplemented from searchableSurface.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 1157 of file triSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, Foam::endl(), fld, forAll, Foam::Pout, and Foam::HashTableOps::values().
Referenced by distributedTriSurfaceMesh::getField().
writeData function required by regIOobject but not used.
For this class, write is used instead
Reimplemented from objectRegistry.
Definition at line 352 of file triSurfaceMesh.H.
References NotImplemented.
|
virtual |
Write using given format, version and compression.
Reimplemented from objectRegistry.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 1241 of file triSurfaceMesh.C.
References TimePaths::caseConstant(), TimePaths::caseSystem(), TimePaths::constant(), string::expand(), IOobject::instance(), fileName::isAbsolute(), Foam::isFile(), Foam::mkDir(), IOobject::objectPath(), fileName::path(), runTime, TimePaths::system(), IOobject::time(), and Time::timeName().
|
inlinevirtual |
Is object global.
Reimplemented from searchableSurface.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 368 of file triSurfaceMesh.H.
|
inlinevirtual |
Return complete path + object name if the file exists.
either in the case/processor or case otherwise null
Reimplemented from searchableSurface.
Reimplemented in distributedTriSurfaceMesh.
Definition at line 375 of file triSurfaceMesh.H.
|
protected |
Supplied fileName override.
Definition at line 112 of file triSurfaceMesh.H.
|
protected |
Optional min triangle quality. Triangles below this get.
ignored for normal calculation
Definition at line 116 of file triSurfaceMesh.H.
|
mutableprotected |
Search tree for boundary edges.
Definition at line 119 of file triSurfaceMesh.H.
|
mutableprotected |
Names of regions.
Definition at line 122 of file triSurfaceMesh.H.
|
mutableprotected |
Is surface closed.
Definition at line 125 of file triSurfaceMesh.H.
|
mutableprotected |
If surface is closed, what is type of outside points.
Definition at line 128 of file triSurfaceMesh.H.
|
static |
Return the mesh sub-directory name (usually "triSurface")
Definition at line 188 of file triSurfaceMesh.H.