A topoSetSource
to convert a pointSet
to a pointZone
(and associated pointSet
).
Operand | Type | Location |
---|---|---|
input | pointSet | $FOAM_CASE/constant/polyMesh/sets/<set> |
output 1 | pointSet | $FOAM_CASE/constant/polyMesh/sets/<set> |
output 2 | pointZone | $FOAM_CASE/constant/polyMesh/pointZones |
Example of the setToPointZone
topoSet by using actions
sub-dictionary in system/topoSetDict
file:
{ // Mandatory (inherited) entries name <name>; type pointSet; action <action>; // Mandatory entries source setToPointZone; set <pointSetName>; }
where the entries mean:
Property | Description | Type | Required | Default |
---|---|---|---|---|
name | Name of pointSet | word | yes | - |
type | Type name: pointSet | word | yes | - |
action | Action applied on points - see below | word | yes | - |
source | Source name: setToPointZone | word | yes | - |
set | Name of input pointSet | word | yes | - |
Options for the action
entry:
new | Create a new pointZone from selected points of a pointSet add | Add selected points of a pointSet into this pointZone subtract | Remove selected points of a pointSet from this pointZone
Tutorial:
Source code:
History
Would you like to suggest an improvement to this page? | Create an issue |
Copyright © 2020 OpenCFD Ltd.