interCondensatingEvaporatingFoam.C

Go to the documentation of this file.

/*---------------------------------------------------------------------------*\
  =========                 |
  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   \\    /   O peration     |
    \\  /    A nd           | www.openfoam.com
     \\/     M anipulation  |
-------------------------------------------------------------------------------
    Copyright (C) 2016-2020 OpenCFD Ltd.
-------------------------------------------------------------------------------
License
    This file is part of OpenFOAM.
 
    OpenFOAM is free software: you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
 
    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
    for more details.
 
    You should have received a copy of the GNU General Public License
    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
 
Application
    interCondensatingEvaporatingFoam
 
Group
    grpMultiphaseSolvers
 
Description
    Solver for two incompressible, non-isothermal immiscible fluids with
    phase-change (evaporation-condensation) between a fluid and its vapour.
    Uses a VOF (volume of fluid) phase-fraction based interface capturing
    approach.
 
    The momentum, energy and other fluid properties are of the "mixture" and a
    single momentum equation is solved.
 
    Turbulence modelling is generic, i.e. laminar, RAS or LES may be selected.
 
\*---------------------------------------------------------------------------*/
 
#include "fvCFD.H"
#include "dynamicFvMesh.H"
#include "CMULES.H"
#include "EulerDdtScheme.H"
#include "localEulerDdtScheme.H"
#include "CrankNicolsonDdtScheme.H"
#include "subCycle.H"
#include "interfaceProperties.H"
#include "twoPhaseMixtureEThermo.H"
#include "temperaturePhaseChangeTwoPhaseMixture.H"
#include "turbulentTransportModel.H"
#include "turbulenceModel.H"
#include "pimpleControl.H"
#include "fvOptions.H"
#include "CorrectPhi.H"
 
 
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
int main(int argc, char *argv[])
{
    argList::addNote
    (
        "Solver for two incompressible, non-isothermal immiscible fluids with"
        " phase-change,"
        " using VOF phase-fraction based interface capturing.\n"
        "With optional mesh motion and mesh topology changes including"
        " adaptive re-meshing."
    );
 
    #include "postProcess.H"
 
    #include "addCheckCaseOptions.H"
    #include "setRootCaseLists.H"
    #include "createTime.H"
    #include "createDynamicFvMesh.H"
    #include "initContinuityErrs.H"
    #include "createDyMControls.H"
    #include "createFields.H"
    #include "createAlphaFluxes.H"
    #include "initCorrectPhi.H"
    #include "createUfIfPresent.H"
 
    #include "CourantNo.H"
    #include "setInitialDeltaT.H"
 
    volScalarField& T = thermo->T();
 
    turbulence->validate();
 
    // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
    Info<< "\nStarting time loop\n" << endl;
 
    while (runTime.run())
    {
        #include "readDyMControls.H"
 
        // Store divU from the previous mesh so that it can be mapped
        // and used in correctPhi to ensure the corrected phi has the
        // same divergence
 
        volScalarField divU("divU", fvc::div(fvc::absolute(phi, U)));
 
        {
            #include "CourantNo.H"
            #include "alphaCourantNo.H"
            #include "setDeltaT.H"
        }
 
        ++runTime;
 
        Info<< "Time = " << runTime.timeName() << nl << endl;
 
        // --- Pressure-velocity PIMPLE corrector loop
        while (pimple.loop())
        {
            if (pimple.firstIter() || moveMeshOuterCorrectors)
            {
                mesh.update();
 
                if (mesh.changing())
                {
                    // Do not apply previous time-step mesh compression flux
                    // if the mesh topology changed
                    if (mesh.topoChanging())
                    {
                        talphaPhi1Corr0.clear();
                    }
 
                    gh = (g & mesh.C()) - ghRef;
                    ghf = (g & mesh.Cf()) - ghRef;
 
                    MRF.update();
 
                    if (correctPhi)
                    {
                        // Calculate absolute flux
                        // from the mapped surface velocity
                        phi = mesh.Sf() & Uf();
 
                        #include "correctPhi.H"
 
                        // Make the flux relative to the mesh motion
                        fvc::makeRelative(phi, U);
                    }
 
                    if (checkMeshCourantNo)
                    {
                        #include "meshCourantNo.H"
                    }
                }
            }
 
            mixture->correct();
 
            #include "alphaControls.H"
            #include "alphaEqnSubCycle.H"
 
            interface.correct();
 
            #include "UEqn.H"
            #include "TEqn.H"
 
            // --- Pressure corrector loop
            while (pimple.correct())
            {
                #include "pEqn.H"
            }
 
            if (pimple.turbCorr())
            {
                turbulence->correct();
            }
        }
 
        rho = alpha1*rho1 + alpha2*rho2;
 
        runTime.write();
 
        runTime.printExecutionTime(Info);
    }
 
    Info<< "End\n" << endl;
 
    return 0;
}
 
 
// ************************************************************************* //