The open source CFD toolbox
Thermophysical
Collaboration diagram for Thermophysical:

## Modules

Thermo baffle boundary conditions

## Classes

class  thermalShellFvPatchScalarField
This boundary condition provides a coupled temperature condition between a primary region (3D mesh) and a thermal shell model (2D mesh). More...

class  thermalBaffleFvPatchScalarField
This boundary condition provides a coupled temperature condition between multiple mesh regions. More...

class  energyJumpFvPatchScalarField
This boundary condition provides an energy jump condition across a pair of coupled patches. It is not applied directly, but is employed on-the-fly when converting temperature boundary conditions into energy. More...

class  energyJumpAMIFvPatchScalarField
This boundary condition provides an energy jump condition across a pair of coupled patches with an arbitrary mesh interface (AMI). It is not applied directly, but is employed on-the-fly when converting temperature boundary conditions into energy. More...

class  fixedEnergyFvPatchScalarField
This boundary condition provides a fixed condition for internal energy. More...

This boundary condition provides a gradient condition for internal energy, where the gradient is calculated using: More...

class  mixedEnergyFvPatchScalarField
This boundary condition provides a mixed condition for internal energy. More...

This boundary condition provides a grey-diffuse condition for radiation intensity, I, for use with the finite-volume discrete-ordinates model (fvDOM), in which the radiation temperature is retrieved from the temperature field boundary condition. More...

class  greyDiffusiveViewFactorFixedValueFvPatchScalarField
This boundary condition provides a grey-diffuse condition for radiative heat flux, qr, for use with the view factor model. More...

A 'mixed' boundary condition that implements a Marshak condition for the incident radiation field (usually written as G) More...

A 'mixed' boundary condition that implements a Marshak condition for the incident radiation field (usually written as G) More...

This boundary condition provides a wide-band, diffusive radiation condition, where the patch temperature is specified. More...

class  fixedUnburntEnthalpyFvPatchScalarField
Fixed boundary condition for unburnt. More...

gradient boundary condition for unburnt More...

class  mixedUnburntEnthalpyFvPatchScalarField
Mixed boundary condition for unburnt. More...

class  externalWallHeatFluxTemperatureFvPatchScalarField
This boundary condition applies a heat flux condition to temperature on an external wall in one of three modes: More...

Boundary condition for thermal coupling for solid regions. Used to emulate a fixed incident radiative heat flux on a wall. More...

class  lumpedMassWallTemperatureFvPatchScalarField
Employs a lumped mass model for temperature. More...

class  thermalBaffle1DFvPatchScalarField< solidType >
This BC solves a steady 1D thermal baffle. More...

class  wallHeatTransferFvPatchScalarField
This boundary condition provides an enthalpy condition for wall heat transfer. More...

## Detailed Description

This group contains thermophysical model boundary conditions