Classes | |
| class | coupledFvPatchField< Type > |
| Abstract base class for coupled patches. More... | |
| class | cyclicFvPatchField< Type > |
| This boundary condition enforces a cyclic condition between a pair of boundaries. More... | |
| class | cyclicACMIFvPatchField< Type > |
| This boundary condition enforces a cyclic condition between a pair of boundaries, whereby communication between the patches is performed using an arbitrarily coupled mesh interface (ACMI) interpolation. More... | |
| class | cyclicAMIFvPatchField< Type > |
| This boundary condition enforces a cyclic condition between a pair of boundaries, whereby communication between the patches is performed using an arbitrary mesh interface (AMI) interpolation. More... | |
| class | cyclicSlipFvPatchField< Type > |
| This boundary condition is a light wrapper around the cyclicFvPatchField condition, providing no new functionality. More... | |
| class | jumpCyclicFvPatchField< Type > |
| This boundary condition provides a base class for coupled-cyclic conditions with a specified 'jump' (or offset) between the values. More... | |
| class | jumpCyclicAMIFvPatchField< Type > |
| This boundary condition provides a base class that enforces a cyclic condition with a specified 'jump' (or offset) between a pair of boundaries, whereby communication between the patches is performed using an arbitrary mesh interface (AMI) interpolation. More... | |
| class | nonuniformTransformCyclicFvPatchField< Type > |
| This boundary condition enforces a cyclic condition between a pair of boundaries, incorporating a non-uniform transformation. More... | |
| class | processorFvPatchField< Type > |
| This boundary condition enables processor communication across patches. More... | |
| class | processorCyclicFvPatchField< Type > |
| This boundary condition enables processor communication across cyclic patches. More... | |
| class | activeBaffleVelocityFvPatchVectorField |
| This velocity boundary condition simulates the opening of a baffle due to local flow conditions, by merging the behaviours of wall and cyclic conditions. The baffle joins two mesh regions, where the open fraction determines the interpolation weights applied to each cyclic- and neighbour-patch contribution. More... | |
| class | activePressureForceBaffleVelocityFvPatchVectorField |
| This boundary condition is applied to the flow velocity, to simulate the opening or closure of a baffle due to area averaged pressure or force delta, between both sides of the baffle. This is achieved by merging the behaviours of wall and cyclic baffles. More... | |
| class | fanFvPatchField< Type > |
This boundary condition provides a jump condition, using the cyclic condition as a base. More... | |
| class | fixedJumpFvPatchField< Type > |
This boundary condition provides a jump condition, using the cyclic condition as a base. More... | |
| class | fixedJumpAMIFvPatchField< Type > |
| This boundary condition provides a jump condition, across non-conformal cyclic path-pairs, employing an arbitraryMeshInterface (AMI). More... | |
| class | mappedFieldFvPatchField< Type > |
This boundary condition provides a self-contained version of the mapped condition. It does not use information on the patch; instead it holds the data locally. More... | |
| class | mappedMixedFieldFvPatchField< Type > |
| This boundary condition provides a self-contained version of e.g. mapped boundary conditions. More... | |
| class | mappedFixedInternalValueFvPatchField< Type > |
| This boundary condition maps the boundary and internal values of a neighbour patch field to the boundary and internal values of *this. More... | |
| class | mappedFixedPushedInternalValueFvPatchField< Type > |
| This boundary condition maps the boundary values of a neighbour patch field to the boundary and internal cell values of *this. More... | |
| class | mappedFixedValueFvPatchField< Type > |
| This boundary condition maps the value at a set of cells or patch faces back to *this. More... | |
| class | mappedFlowRateFvPatchVectorField |
| Describes a volumetric/mass flow normal vector boundary condition by its magnitude as an integral over its area. More... | |
| class | mappedMixedFvPatchField< Type > |
| This boundary condition maps the value at a set of cells or patch faces back to *this. More... | |
| class | mappedVelocityFluxFixedValueFvPatchField |
| This boundary condition maps the velocity and flux from a neighbour patch to this patch. More... | |
| class | swirlFanVelocityFvPatchField |
| This boundary condition provides a jump condition for U across a cyclic pressure jump condition and applies a transformation to U. More... | |
| class | timeVaryingMappedFixedValueFvPatchField< Type > |
| This boundary conditions interpolates the values from a set of supplied points in space and time. More... | |
| class | uniformJumpFvPatchField< Type > |
This boundary condition provides a jump condition, using the cyclic condition as a base. The jump is specified as a time-varying uniform value across the patch. More... | |
| class | uniformJumpAMIFvPatchField< Type > |
This boundary condition provides a jump condition, using the cyclicAMI condition as a base. The jump is specified as a time-varying uniform value across the patch. More... | |
| class | externalCoupledMixedFvPatchField< Type > |
| Extends the mixed boundary condition with serialisation functions. More... | |
| class | externalCoupledTemperatureMixedFvPatchScalarField |
| This boundary condition provides a temperatue interface to an external application. More... | |
| class | oversetFvPatchField< Type > |
| Boundary condition for use on overset patches. To be run in combination with special dynamicFvMesh type that inserts interpolation into the matrix. More... | |
| class | energyJumpFvPatchScalarField |
| This boundary condition provides an energy jump condition across a pair of coupled patches. It is not applied directly, but is employed on-the-fly when converting temperature boundary conditions into energy. More... | |
| class | energyJumpAMIFvPatchScalarField |
| This boundary condition provides an energy jump condition across a pair of coupled patches with an arbitrary mesh interface (AMI). It is not applied directly, but is employed on-the-fly when converting temperature boundary conditions into energy. More... | |
| class | porousBafflePressureFvPatchField< Type > |
This boundary condition provides a jump condition, using the cyclic condition as a base. More... | |
This group contains coupled boundary condition types
1.8.17 