IOoject and searching on distributed triSurface. All processor hold (possibly overlapping) part of the overall surface. All queries are distributed to the processor that can answer it and the result sent back. More...
Public Types | |
| enum | distributionType { FOLLOW = 0, INDEPENDENT = 1, DISTRIBUTED = 2, FROZEN = 3 } |
 Public Types inherited from triSurfaceMesh | |
| enum | readAction { localOnly, localOrGlobal, masterOnly } |
| Public Types inherited from IOobject | |
| enum | objectState : char { GOOD, BAD } |
| Enumeration defining the valid states of an IOobject. More... | |
| enum | readOption : char { MUST_READ, MUST_READ_IF_MODIFIED, READ_IF_PRESENT, NO_READ } |
| Enumeration defining the read options. More... | |
| enum | writeOption : char { AUTO_WRITE = 0, NO_WRITE = 1 } |
| Enumeration defining the write options. More... | |
| enum | fileCheckTypes : char { timeStamp, timeStampMaster, inotify, inotifyMaster } |
| Enumeration defining the file checking options. More... | |
| Public Types inherited from HashTable< regIOobject * > | |
| typedef HashTable< regIOobject *, word, Foam::Hash< word > > | this_type |
| The template instance used for this HashTable. More... | |
| typedef word | key_type |
| The second template parameter, type of keys used. More... | |
| typedef regIOobject * | mapped_type |
| The first template parameter, type of objects contained. More... | |
| typedef regIOobject * | value_type |
| Same as mapped_type for OpenFOAM HashTables. More... | |
| typedef Foam::Hash< word > | hasher |
| The third template parameter, the hash index method. More... | |
| typedef regIOobject * * | pointer |
| Pointer type for storing into value_type objects. More... | |
| typedef regIOobject * & | reference |
| Reference to the stored value_type. More... | |
| typedef label | difference_type |
| The type to represent the difference between two iterators. More... | |
| typedef label | size_type |
| The type that can represent the size of a HashTable. More... | |
| using | key_iterator = key_iterator_base< iterator > |
| Forward iterator returning the key. More... | |
| using | const_key_iterator = key_iterator_base< const_iterator > |
| Forward const iterator returning the key. More... | |
| Public Types inherited from triSurface | |
| typedef bool | BoundaryMesh |
| Placeholder only, but do not remove - it is needed for GeoMesh. More... | |
| typedef labelledTri | face_type |
| The face type (same as the underlying PrimitivePatch) More... | |
| typedef point | point_type |
| The point type (same as the underlying PrimitivePatch) More... | |
| Public Types inherited from PrimitivePatch<::Foam::List< labelledTri >, pointField > | |
| enum | surfaceTopo |
| Enumeration defining the surface type. Used in check routines. More... | |
| typedef std::remove_reference< ::Foam::List< labelledTri > >::type::value_type | face_type |
| The face type. More... | |
| typedef std::remove_reference< pointField >::type::value_type | point_type |
| The point type. More... | |
| typedef ::Foam::List< labelledTri > | FaceListType |
| The face list type. More... | |
| typedef pointField | PointFieldType |
| The point field type. More... | |
| typedef face_type | FaceType |
| Deprecated(2020-03) prefer face_type typedef. More... | |
| Public Types inherited from List< labelledTri > | |
| typedef SubList< labelledTri > | subList |
| Declare type of subList. More... | |
Public Member Functions | |
| TypeName ("distributedTriSurfaceMesh") | |
| Runtime type information. More... | |
| distributedTriSurfaceMesh (const IOobject &, const triSurface &, const dictionary &dict) | |
| Construct from triSurface. More... | |
| distributedTriSurfaceMesh (const IOobject &io) | |
| Construct read. Does findInstance to find io.local(). More... | |
| distributedTriSurfaceMesh (const IOobject &io, const dictionary &dict) | |
| Construct from dictionary (used by searchableSurface). More... | |
| virtual | ~distributedTriSurfaceMesh () |
| Destructor. More... | |
| void | clearOut () |
| Clear storage. More... | |
| const globalIndex & | globalTris () const |
| Triangle indexing (demand driven) More... | |
| virtual label | globalSize () const |
| Range of global indices that can be returned. More... | |
| virtual void | findNearest (const pointField &sample, const scalarField &nearestDistSqr, List< pointIndexHit > &) const |
| virtual void | findNearest (const pointField &samples, const scalarField &nearestDistSqr, const labelList ®ionIndices, List< pointIndexHit > &info) const |
| Find the nearest locations for the supplied points to a. More... | |
| virtual void | findLine (const pointField &start, const pointField &end, List< pointIndexHit > &) const |
| Find first intersection on segment from start to end. More... | |
| virtual void | findLineAny (const pointField &start, const pointField &end, List< pointIndexHit > &) const |
| Return any intersection on segment from start to end. More... | |
| virtual void | findLineAll (const pointField &start, const pointField &end, List< List< pointIndexHit >> &) const |
| Get all intersections in order from start to end. More... | |
| virtual void | getRegion (const List< pointIndexHit > &, labelList ®ion) const |
| From a set of points and indices get the region. More... | |
| virtual void | getNormal (const List< pointIndexHit > &, vectorField &normal) const |
| From a set of points and indices get the normal. More... | |
| virtual void | getVolumeType (const pointField &, List< volumeType > &) const |
| Determine type (inside/outside/mixed) for point. unknown if. More... | |
| virtual void | distribute (const List< treeBoundBox > &, const bool keepNonLocal, autoPtr< mapDistribute > &faceMap, autoPtr< mapDistribute > &pointMap) |
| Set bounds of surface. Bounds currently set as list of. More... | |
| virtual void | getField (const List< pointIndexHit > &, labelList &) const |
| WIP. From a set of hits (points and. More... | |
| virtual autoPtr< mapDistribute > | localQueries (const List< pointIndexHit > &, labelList &triangleIndex) const |
| Obtains global indices from pointIndexHit and swaps them back. More... | |
| void | writeStats (Ostream &os) const |
| Print some stats. Parallel aware version of. More... | |
| virtual bool | writeObject (IOstreamOption streamOpt, const bool valid) const |
| Write using stream options. More... | |
| virtual bool | global () const |
| Is object global. More... | |
| virtual fileName | filePath () const |
| Return complete path + object name if the file exists. More... | |
| Public Member Functions inherited from triSurfaceMesh | |
| TypeName ("triSurfaceMesh") | |
| Runtime type information. More... | |
| triSurfaceMesh (const IOobject &, const triSurface &) | |
| Construct from triSurface. More... | |
| triSurfaceMesh (const IOobject &io) | |
| Construct read. More... | |
| triSurfaceMesh (const IOobject &io, const dictionary &dict) | |
| Construct from IO and dictionary (used by searchableSurface). More... | |
| triSurfaceMesh (const IOobject &io, const readAction r) | |
| triSurfaceMesh (const IOobject &io, const dictionary &dict, const readAction r) | |
| virtual | ~triSurfaceMesh () |
| Destructor. More... | |
| void | clearOut () |
| Clear storage. More... | |
| virtual void | movePoints (const pointField &) |
| Move points. More... | |
| const indexedOctree< treeDataEdge > & | edgeTree () const |
| Demand driven construction of octree for boundary edges. More... | |
| virtual const wordList & | regions () const |
| Names of regions. More... | |
| virtual bool | hasVolumeType () const |
| Whether supports volume type (below) - i.e. whether is closed. More... | |
| virtual volumeType | outsideVolumeType () const |
| If surface is closed, what is type of points outside bounds. More... | |
| virtual label | size () const |
| Range of local indices that can be returned. More... | |
| virtual tmp< pointField > | coordinates () const |
| Get representative set of element coordinates. More... | |
| virtual void | boundingSpheres (pointField ¢res, scalarField &radiusSqr) const |
| Get bounding spheres (centre and radius squared). Any point. More... | |
| virtual tmp< pointField > | points () const |
| Get the points that define the surface. More... | |
| virtual bool | overlaps (const boundBox &bb) const |
| Does any part of the surface overlap the supplied bound box? More... | |
| virtual void | setField (const labelList &values) |
| WIP. Store element-wise field. More... | |
| bool | writeData (Ostream &) const |
| writeData function required by regIOobject but not used. More... | |
| Public Member Functions inherited from searchableSurface | |
| TypeName ("searchableSurface") | |
| Runtime type information. More... | |
| declareRunTimeSelectionTable (autoPtr, searchableSurface, dict,(const IOobject &io, const dictionary &dict),(io, dict)) | |
| searchableSurface (const IOobject &io) | |
| virtual autoPtr< searchableSurface > | clone () const |
| Clone. More... | |
| virtual | ~searchableSurface ()=default |
| Destructor. More... | |
| virtual const boundBox & | bounds () const |
| Return const reference to boundBox. More... | |
| virtual boundBox & | bounds () |
| Return non-const access to the boundBox to allow it to be set. More... | |
| virtual void | findNearest (const pointField &sample, const scalarField &nearestDistSqr, List< pointIndexHit > &, vectorField &normal, labelList ®ion) const |
| Find nearest, normal and region. Can be overridden with. More... | |
| Public Member Functions inherited from regIOobject | |
| TypeName ("regIOobject") | |
| Runtime type information. More... | |
| regIOobject (const IOobject &io, const bool isTimeObject=false) | |
| regIOobject (const regIOobject &rio) | |
| Copy construct. More... | |
| regIOobject (const regIOobject &rio, bool registerCopy) | |
| regIOobject (const word &newName, const regIOobject &, bool registerCopy) | |
| regIOobject (const IOobject &io, const regIOobject &rio) | |
| Copy construct with new IO parameters. More... | |
| virtual | ~regIOobject () |
| Destructor. More... | |
| bool | checkIn () |
| Add object to registry, if not already registered. More... | |
| bool | checkOut () |
| Remove all file watches and remove object from registry. More... | |
| virtual void | addWatch () |
| Add file watch on object (if registered and READ_IF_MODIFIED) More... | |
| bool | ownedByRegistry () const |
| Is this object owned by the registry? More... | |
| bool | store () |
| void | release (const bool unregister=false) |
| Release ownership of this object from its registry. More... | |
| label | eventNo () const |
| Event number at last update. More... | |
| label & | eventNo () |
| Event number at last update. More... | |
| bool | upToDate (const regIOobject &) const |
| Return true if up-to-date with respect to given object. More... | |
| bool | upToDate (const regIOobject &, const regIOobject &) const |
| Return true if up-to-date with respect to given objects. More... | |
| bool | upToDate (const regIOobject &, const regIOobject &, const regIOobject &) const |
| Return true if up-to-date with respect to given objects. More... | |
| bool | upToDate (const regIOobject &, const regIOobject &, const regIOobject &, const regIOobject &) const |
| Return true if up-to-date with respect to given objects. More... | |
| void | setUpToDate () |
| Set as up-to-date. More... | |
| const dictionary * | findMetaData () const noexcept |
| Return pointer to meta-data or nullptr. More... | |
| dictionary & | getMetaData () noexcept |
| Get or create meta-data. More... | |
| void | removeMetaData () |
| Remove meta-data. More... | |
| virtual void | updateMetaData () |
| Update internal meta-data (eg, prior to writing) More... | |
| bool | headerOk () |
| Read and check header info. More... | |
| Istream & | readStream (const word &, const bool valid=true) |
| Return Istream and check object type against that given. More... | |
| void | close () |
| Close Istream. More... | |
| virtual bool | readData (Istream &) |
| Virtual readData function. More... | |
| virtual label | addWatch (const fileName &) |
| Add file watch for fileName on object if not yet watched. More... | |
| const labelList & | watchIndices () const |
| Return file-monitoring handles. More... | |
| labelList & | watchIndices () |
| Return file-monitoring handles. More... | |
| virtual bool | write (const bool valid=true) const |
| Write using setting from DB. More... | |
| void | operator= (const IOobject &io) |
| Copy assignment. More... | |
| virtual bool | writeObject (IOstreamOption::streamFormat fmt, IOstreamOption::versionNumber ver, IOstreamOption::compressionType comp, const bool valid) const |
| Write using given format, version and compression. More... | |
| Public Member Functions inherited from IOobject | |
| TypeName ("IOobject") | |
| Declare type-name, virtual type (with debug switch) More... | |
| IOobject (const IOobject &)=default | |
| Copy construct. More... | |
| virtual | ~IOobject ()=default |
| Destructor. More... | |
| IOobject (const word &name, const fileName &instance, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true, bool globalObject=false) | |
| Construct from name, instance, registry, io options. More... | |
| IOobject (const word &name, const fileName &instance, const fileName &local, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true, bool globalObject=false) | |
| Construct from name, instance, local, registry, io options. More... | |
| IOobject (const fileName &path, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true, bool globalObject=false) | |
| Construct from path, registry, io options. More... | |
| IOobject (const IOobject &io, const objectRegistry ®istry) | |
| Copy construct, resetting registry. More... | |
| IOobject (const IOobject &io, const word &name) | |
| Copy construct, resetting name. More... | |
| IOobject (const IOobject &io, readOption, writeOption) | |
| Copy construct, resetting io options. More... | |
| autoPtr< IOobject > | clone () const |
| Clone. More... | |
| autoPtr< IOobject > | clone (const objectRegistry ®istry) const |
| Clone resetting registry. More... | |
| const objectRegistry & | db () const noexcept |
| Return the local objectRegistry. More... | |
| const Time & | time () const |
| Return Time associated with the objectRegistry. More... | |
| const word & | name () const noexcept |
| Return name. More... | |
| const word & | headerClassName () const noexcept |
| Return name of the class name read from header. More... | |
| word & | headerClassName () noexcept |
| Return non-constant access to the class name read from header. More... | |
| const string & | note () const noexcept |
| Return the optional note. More... | |
| string & | note () noexcept |
| Return non-constant access to the optional note. More... | |
| bool | registerObject () const noexcept |
| Should object created with this IOobject be registered? More... | |
| bool | registerObject (bool on) noexcept |
| Change registration preference, return previous value. More... | |
| bool | globalObject () const noexcept |
| Is object same for all processors? More... | |
| bool | globalObject (bool on) noexcept |
| Change global-object status, return previous value. More... | |
| unsigned | labelByteSize () const noexcept |
| The sizeof (label) in bytes, possibly read from the header. More... | |
| unsigned | scalarByteSize () const noexcept |
| The sizeof (scalar) in bytes, possibly read from the header. More... | |
| bool | isHeaderClassName (const word &clsName) const |
| Test if headerClassName() equals the given class name. More... | |
| template<class Type > | |
| bool | isHeaderClassName () const |
| Test if headerClassName() equals Type::typeName. More... | |
| readOption | readOpt () const noexcept |
| The read option. More... | |
| readOption | readOpt (readOption opt) noexcept |
| Change the read option, return previous value. More... | |
| writeOption | writeOpt () const noexcept |
| The write option. More... | |
| writeOption | writeOpt (writeOption opt) noexcept |
| Change the write option, return previous value. More... | |
| word | group () const |
| Return group (extension part of name) More... | |
| word | member () const |
| Return member (name without the extension) More... | |
| const fileName & | rootPath () const |
| const fileName & | caseName () const |
| const fileName & | instance () const noexcept |
| fileName & | instance () noexcept |
| const fileName & | local () const noexcept |
| fileName | path () const |
| The complete path. More... | |
| fileName | path (const word &instance, const fileName &local=fileName::null) const |
| The complete path with alternative instance and local. More... | |
| fileName | objectPath () const |
| The complete path + object name. More... | |
| fileName | objectRelPath () const |
| The object path relative to the root. More... | |
| fileName | localFilePath (const word &typeName, const bool search=true) const |
| Helper for filePath that searches locally. More... | |
| fileName | globalFilePath (const word &typeName, const bool search=true) const |
| Helper for filePath that searches up if in parallel. More... | |
| IOstreamOption | parseHeader (const dictionary &headerDict) |
| bool | readHeader (Istream &is) |
| bool | readHeader (dictionary &headerDict, Istream &is) |
| template<class Type > | |
| bool | typeHeaderOk (const bool checkType=true, const bool search=true, const bool verbose=true) |
| Read header (uses typeFilePath to find file) and check its info. More... | |
| template<class Type > | |
| void | warnNoRereading () const |
| Helper: warn that type does not support re-reading. More... | |
| bool | writeHeader (Ostream &os) const |
| Write header with current type() More... | |
| bool | writeHeader (Ostream &os, const word &objectType) const |
| Write header with override of type. More... | |
| void | writeHeader (dictionary &dict, IOstreamOption streamOpt) const |
| void | writeHeader (dictionary &dict, const word &objectType, IOstreamOption streamOpt) const |
| bool | good () const noexcept |
| bool | bad () const noexcept |
| InfoProxy< IOobject > | info () const |
| Return info proxy. More... | |
| void | operator= (const IOobject &io) |
| readOption & | readOpt () noexcept |
| Access to the read option. More... | |
| writeOption & | writeOpt () noexcept |
| Access to the write option. More... | |
| bool & | registerObject () noexcept |
| Access to the register object option. More... | |
| bool & | globalObject () noexcept |
| Access to the global object option. More... | |
| template<> | |
| bool | isHeaderClassName () const |
Specialization for void always returns true (no headerClassName check). More... | |
| template<class StringType > | |
| Foam::word | groupName (StringType base, const word &group) |
| Public Member Functions inherited from objectRegistry | |
| TypeName ("objectRegistry") | |
| Declare type name for this IOobject. More... | |
| objectRegistry (const Time &db, const label nObjects=128) | |
| objectRegistry (const IOobject &io, const label nObjects=128) | |
| virtual | ~objectRegistry () |
| Destructor, with checkOut() for all objects that are ownedByRegistry. More... | |
| const objectRegistry & | thisDb () const noexcept |
| Return the object registry. More... | |
| const objectRegistry & | parent () const noexcept |
| Return the parent objectRegistry. More... | |
| const Time & | time () const noexcept |
| Return time registry. More... | |
| bool | isTimeDb () const noexcept |
| True if the registry is Time. More... | |
| virtual const fileName & | dbDir () const |
| Local directory path of this objectRegistry relative to the time. More... | |
| HashTable< wordHashSet > | classes () const |
| A summary hash of classes used and their associated object names. More... | |
| template<class MatchPredicate > | |
| HashTable< wordHashSet > | classes (const MatchPredicate &matchName) const |
| label | count (const char *clsName) const |
| The number of objects of the given class name. More... | |
| template<class MatchPredicate > | |
| label | count (const MatchPredicate &matchClass) const |
| The number of objects of the given class name. More... | |
| template<class MatchPredicate1 , class MatchPredicate2 > | |
| label | count (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
| The number of objects of the given class name. More... | |
| template<class Type > | |
| label | count (const bool strict=false) const |
The names of objects with a class satisfying isA<Type> More... | |
| template<class Type , class MatchPredicate > | |
| label | count (const MatchPredicate &matchName) const |
| wordList | names () const |
| The names of all objects. More... | |
| wordList | names (const char *clsName) const |
| The names of objects with the given class name. More... | |
| template<class MatchPredicate > | |
| wordList | names (const MatchPredicate &matchClass) const |
| The names of objects with a matching class name. More... | |
| template<class MatchPredicate1 , class MatchPredicate2 > | |
| wordList | names (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
| template<class Type > | |
| wordList | names () const |
The names of objects with a class satisfying isA<Type>. More... | |
| template<class Type , class MatchPredicate > | |
| wordList | names (const MatchPredicate &matchName) const |
| wordList | sortedNames () const |
| The sorted names of all objects. More... | |
| wordList | sortedNames (const char *clsName) const |
| The sorted names of objects with the given class name. More... | |
| template<class MatchPredicate > | |
| wordList | sortedNames (const MatchPredicate &matchClass) const |
| The sorted names objects with a matching class name. More... | |
| template<class MatchPredicate1 , class MatchPredicate2 > | |
| wordList | sortedNames (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
| template<class Type > | |
| wordList | sortedNames () const |
The sorted names of objects with a class satisfying isA<Type> More... | |
| template<class Type , class MatchPredicate > | |
| wordList | sortedNames (const MatchPredicate &matchName) const |
| const objectRegistry & | subRegistry (const word &name, const bool forceCreate=false, const bool recursive=false) const |
| Lookup and return a const sub-objectRegistry. More... | |
| template<class Type > | |
| HashTable< const Type * > | lookupClass (const bool strict=false) const |
Return all objects with a class satisfying isA<Type> More... | |
| template<class Type > | |
| HashTable< Type * > | lookupClass (const bool strict=false) |
Return all objects with a class satisfying isA<Type> More... | |
| const regIOobject * | cfindIOobject (const word &name, const bool recursive=false) const |
| Return const pointer to the regIOobject. More... | |
| bool | found (const word &name, const bool recursive=false) const |
| Can the regIOobject object be found (by name). More... | |
| template<class Type > | |
| bool | foundObject (const word &name, const bool recursive=false) const |
| Is the named Type found? More... | |
| template<class Type > | |
| const Type * | cfindObject (const word &name, const bool recursive=false) const |
| Return const pointer to the object of the given Type. More... | |
| template<class Type > | |
| const Type * | findObject (const word &name, const bool recursive=false) const |
| Return const pointer to the object of the given Type. More... | |
| template<class Type > | |
| Type * | findObject (const word &name, const bool recursive=false) |
| Return non-const pointer to the object of the given Type. More... | |
| template<class Type > | |
| Type * | getObjectPtr (const word &name, const bool recursive=false) const |
| template<class Type > | |
| const Type & | lookupObject (const word &name, const bool recursive=false) const |
| template<class Type > | |
| Type & | lookupObjectRef (const word &name, const bool recursive=false) const |
| label | getEvent () const |
| Return new event number. More... | |
| bool | checkIn (regIOobject *io) const |
| Add a regIOobject to registry. A nullptr is ignored. More... | |
| bool | checkIn (regIOobject &io) const |
| Add a regIOobject to registry. More... | |
| bool | checkOut (regIOobject *io) const |
| bool | checkOut (regIOobject &io) const |
| bool | checkOut (const word &key) const |
| void | clear () |
| Clear all entries from the registry. More... | |
| void | clearStorage () |
| Clear all entries from the registry and the table itself. More... | |
| bool | erase (const iterator &iter) |
| Erase an entry specified by the given iterator. More... | |
| bool | erase (const word &key) |
| Erase an entry specified by the given key. More... | |
| label | erase (std::initializer_list< word > keys) |
| Remove entries given by the listed keys. More... | |
| label | erase (const UList< word > &keys) |
| Remove entries given by the listed keys. More... | |
| virtual void | rename (const word &newName) |
| Rename. More... | |
| virtual bool | modified () const |
| Return true if any of the object's files have been modified. More... | |
| void | readModifiedObjects () |
| Read the objects that have been modified. More... | |
| virtual bool | readIfModified () |
| Read object if modified. More... | |
| template<class Type > | |
| const Type * | lookupObjectPtr (const word &name, bool recursive=false) const |
| Deprecated(2018-10) find object. More... | |
| template<class Type > | |
| Type * | lookupObjectRefPtr (const word &name, bool recursive=false) const |
| Deprecated(2018-10) get object pointer, ignoring constness. More... | |
| template<class MatchPredicate > | |
| Foam::HashTable< Foam::wordHashSet > | classesImpl (const objectRegistry &list, const MatchPredicate &matchName) |
| template<class MatchPredicate1 , class MatchPredicate2 > | |
| Foam::label | countImpl (const objectRegistry &list, const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) |
| template<class Type , class MatchPredicate > | |
| Foam::label | countTypeImpl (const objectRegistry &list, const MatchPredicate &matchName) |
| template<class MatchPredicate1 , class MatchPredicate2 > | |
| Foam::wordList | namesImpl (const objectRegistry &list, const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName, const bool doSort) |
| template<class Type , class MatchPredicate > | |
| Foam::wordList | namesTypeImpl (const objectRegistry &list, const MatchPredicate &matchName, const bool doSort) |
| template<class MatchPredicate > | |
| Foam::HashTable< Foam::wordHashSet > | classes (const MatchPredicate &matchName) const |
| template<class MatchPredicate > | |
| Foam::label | count (const MatchPredicate &matchClass) const |
| template<class MatchPredicate1 , class MatchPredicate2 > | |
| Foam::label | count (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
| template<class Type , class MatchPredicate > | |
| Foam::label | count (const MatchPredicate &matchName) const |
| template<class Type > | |
| Foam::label | count (const bool strict) const |
| template<class MatchPredicate > | |
| Foam::wordList | names (const MatchPredicate &matchClass) const |
| template<class MatchPredicate1 , class MatchPredicate2 > | |
| Foam::wordList | names (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
| template<class Type > | |
| Foam::wordList | names () const |
| template<class Type , class MatchPredicate > | |
| Foam::wordList | names (const MatchPredicate &matchName) const |
| template<class MatchPredicate > | |
| Foam::wordList | sortedNames (const MatchPredicate &matchClass) const |
| template<class MatchPredicate1 , class MatchPredicate2 > | |
| Foam::wordList | sortedNames (const MatchPredicate1 &matchClass, const MatchPredicate2 &matchName) const |
| template<class Type > | |
| Foam::wordList | sortedNames () const |
| template<class Type , class MatchPredicate > | |
| Foam::wordList | sortedNames (const MatchPredicate &matchName) const |
| template<class Type > | |
| Foam::HashTable< const Type * > | lookupClass (const bool strict) const |
| template<class Type > | |
| Foam::HashTable< Type * > | lookupClass (const bool strict) |
| Public Member Functions inherited from HashTable< regIOobject * > | |
| HashTable () | |
| Default construct with default (128) table capacity. More... | |
| HashTable (const label size) | |
| Construct given initial table capacity. More... | |
| HashTable (Istream &is, const label size=128) | |
| Construct from Istream with default table capacity. More... | |
| HashTable (const this_type &ht) | |
| Copy construct. More... | |
| HashTable (this_type &&rhs) | |
| Move construct. More... | |
| HashTable (std::initializer_list< std::pair< word, regIOobject * >> list) | |
| Construct from an initializer list. More... | |
| ~HashTable () | |
| Destructor. More... | |
| label | capacity () const noexcept |
| The size of the underlying table. More... | |
| label | size () const noexcept |
| The number of elements in table. More... | |
| bool | empty () const noexcept |
| True if the hash table is empty. More... | |
| regIOobject * & | at (const word &key) |
| Find and return a hashed entry. FatalError if it does not exist. More... | |
| const regIOobject * & | at (const word &key) const |
| Find and return a hashed entry. FatalError if it does not exist. More... | |
| bool | found (const word &key) const |
| Return true if hashed entry is found in table. More... | |
| iterator | find (const word &key) |
| Find and return an iterator set at the hashed entry. More... | |
| const_iterator | find (const word &key) const |
| Find and return an const_iterator set at the hashed entry. More... | |
| const_iterator | cfind (const word &key) const |
| Find and return an const_iterator set at the hashed entry. More... | |
| const regIOobject * & | lookup (const word &key, const regIOobject * &deflt) const |
| Return hashed entry if it exists, or return the given default. More... | |
| List< word > | toc () const |
| The table of contents (the keys) in unsorted order. More... | |
| List< word > | sortedToc () const |
| The table of contents (the keys) in sorted order. More... | |
| List< word > | sortedToc (const Compare &comp) const |
| Foam::List< word > | sortedToc (const Compare &comp) const |
| List< word > | tocKeys (const UnaryPredicate &pred, const bool invert=false) const |
| Foam::List< word > | tocKeys (const UnaryPredicate &pred, const bool invert) const |
| List< word > | tocValues (const UnaryPredicate &pred, const bool invert=false) const |
| Foam::List< word > | tocValues (const UnaryPredicate &pred, const bool invert) const |
| List< word > | tocEntries (const BinaryPredicate &pred, const bool invert=false) const |
| Foam::List< word > | tocEntries (const BinaryPredicate &pred, const bool invert) const |
| label | countKeys (const UnaryPredicate &pred, const bool invert=false) const |
| Count the number of keys that satisfy the unary predicate. More... | |
| Foam::label | countKeys (const UnaryPredicate &pred, const bool invert) const |
| label | countValues (const UnaryPredicate &pred, const bool invert=false) const |
| Count the number of values that satisfy the unary predicate. More... | |
| Foam::label | countValues (const UnaryPredicate &pred, const bool invert) const |
| label | countEntries (const BinaryPredicate &pred, const bool invert=false) const |
| Count the number of entries that satisfy the binary predicate. More... | |
| Foam::label | countEntries (const BinaryPredicate &pred, const bool invert) const |
| bool | emplace (const word &key, Args &&... args) |
| Emplace insert a new entry, not overwriting existing entries. More... | |
| bool | emplace_set (const word &key, Args &&... args) |
| Emplace set an entry, overwriting any existing entries. More... | |
| bool | insert (const word &key, const regIOobject * &obj) |
| Copy insert a new entry, not overwriting existing entries. More... | |
| bool | insert (const word &key, regIOobject * &&obj) |
| Move insert a new entry, not overwriting existing entries. More... | |
| bool | set (const word &key, const regIOobject * &obj) |
| Copy assign a new entry, overwriting existing entries. More... | |
| bool | set (const word &key, regIOobject * &&obj) |
| Move assign a new entry, overwriting existing entries. More... | |
| bool | erase (const iterator &iter) |
| Erase an entry specified by given iterator. More... | |
| bool | erase (const word &key) |
| Erase an entry specified by the given key. More... | |
| label | erase (const HashTable< AnyType, word, AnyHash > &other) |
| Remove table entries given by keys of the other hash-table. More... | |
| label | erase (std::initializer_list< word > keys) |
| Remove table entries given by the listed keys. More... | |
| label | erase (InputIter first, InputIter last) |
| Remove multiple entries using an iterator range of keys. More... | |
| label | erase (const FixedList< word, N > &keys) |
| Remove table entries given by the listed keys. More... | |
| label | erase (const UList< word > &keys) |
| Remove table entries given by the listed keys. More... | |
| Foam::label | erase (InputIter first, InputIter last) |
| Foam::label | erase (const FixedList< word, N > &keys) |
| Foam::label | erase (const HashTable< AnyType, word, AnyHash > &other) |
| label | retain (const HashTable< AnyType, word, AnyHash > &other) |
| Retain table entries given by keys of the other hash-table. More... | |
| Foam::label | retain (const HashTable< AnyType, word, AnyHash > &other) |
| label | filterKeys (const UnaryPredicate &pred, const bool pruning=false) |
| Generalized means to filter table entries based on their keys. More... | |
| Foam::label | filterKeys (const UnaryPredicate &pred, const bool pruning) |
| label | filterValues (const UnaryPredicate &pred, const bool pruning=false) |
| Generalized means to filter table entries based on their values. More... | |
| Foam::label | filterValues (const UnaryPredicate &pred, const bool pruning) |
| label | filterEntries (const BinaryPredicate &pred, const bool pruning=false) |
| Generalized means to filter table entries based on their key/value. More... | |
| Foam::label | filterEntries (const BinaryPredicate &pred, const bool pruning) |
| void | resize (const label sz) |
| Resize the hash table for efficiency. More... | |
| void | clear () |
| Clear all entries from table. More... | |
| void | clearStorage () |
| Clear the table entries and the table itself. More... | |
| void | swap (HashTable< regIOobject *, word, Foam::Hash< word > > &rhs) |
| Swap contents into this table. More... | |
| void | transfer (HashTable< regIOobject *, word, Foam::Hash< word > > &rhs) |
| Transfer contents into this table. More... | |
| regIOobject * & | operator[] (const word &key) |
| Find and return a hashed entry. FatalError if it does not exist. More... | |
| const regIOobject * & | operator[] (const word &key) const |
| Find and return a hashed entry. FatalError if it does not exist. More... | |
| regIOobject * & | operator() (const word &key) |
| Return existing entry or create a new entry. More... | |
| regIOobject * & | operator() (const word &key, const regIOobject * &deflt) |
| Return existing entry or insert a new entry. More... | |
| void | operator= (const this_type &rhs) |
| Copy assign. More... | |
| void | operator= (std::initializer_list< std::pair< word, regIOobject * >> rhs) |
| Copy assign from an initializer list. More... | |
| void | operator= (this_type &&rhs) |
| Move assign. More... | |
| bool | operator== (const this_type &rhs) const |
| bool | operator!= (const this_type &rhs) const |
| The opposite of the equality operation. More... | |
| this_type & | operator+= (const this_type &rhs) |
| Add entries into this HashTable. More... | |
| const_iterator_pair< const_key_iterator, this_type > | keys () const |
| A const iterator begin/end pair for iterating over keys. More... | |
| iterator | begin () |
| iterator set to the beginning of the HashTable More... | |
| const_iterator | begin () const |
| const_iterator set to the beginning of the HashTable More... | |
| const_iterator | cbegin () const |
| const_iterator set to the beginning of the HashTable More... | |
| iterator | end () noexcept |
| iterator to signal the end (for any HashTable) More... | |
| const_iterator | end () const noexcept |
| const_iterator to signal the end (for any HashTable) More... | |
| constexpr const_iterator | cend () const noexcept |
| const_iterator to signal the end (for any HashTable) More... | |
| Ostream & | printInfo (Ostream &os) const |
| Print information. More... | |
| Ostream & | writeKeys (Ostream &os, const label shortLen=0) const |
| Public Member Functions inherited from triSurface | |
| ClassName ("triSurface") | |
| Runtime type information. More... | |
| triSurface () | |
| Default construct. More... | |
| triSurface (const triSurface &surf) | |
| Copy construct. More... | |
| triSurface (triSurface &&surf) | |
| Move construct. More... | |
| triSurface (const List< labelledTri > &triangles, const geometricSurfacePatchList &patches, const pointField &pts) | |
| Construct from triangles, patches, points. More... | |
| triSurface (List< labelledTri > &triangles, const geometricSurfacePatchList &patches, pointField &pts, const bool reuse) | |
| Construct from triangles, patches, points. Reuse storage. More... | |
| triSurface (const List< labelledTri > &triangles, const pointField &pts) | |
| triSurface (const triFaceList &triangles, const pointField &pts) | |
| triSurface (const fileName &name, const scalar scaleFactor=-1) | |
| Construct from file name (uses extension to determine type). More... | |
| triSurface (const fileName &name, const word &fileType, const scalar scaleFactor=-1) | |
| Construct from file name with given format type. More... | |
| triSurface (Istream &is) | |
| Construct from Istream. More... | |
| triSurface (const Time &d) | |
| Construct from objectRegistry by reading an ".ftr" file. More... | |
| triSurface (const IOobject &io, const dictionary &dict, const bool isGlobal=true) | |
| Read construct using IO to find the file location. More... | |
| virtual | ~triSurface () |
| Destructor. More... | |
| void | clearOut () |
| void | clearTopology () |
| void | clearPatchMeshAddr () |
| void | swap (triSurface &surf) |
| const geometricSurfacePatchList & | patches () const noexcept |
| geometricSurfacePatchList & | patches () noexcept |
| const List< labelledTri > & | surfFaces () const noexcept |
| Return const access to the faces. More... | |
| const labelListList & | sortedEdgeFaces () const |
| Return edge-face addressing sorted (for edges with more than. More... | |
| const labelList & | edgeOwner () const |
| If 2 face neighbours: label of face where ordering of edge. More... | |
| const vectorField & | Sf () const |
| Face area vectors (normals) More... | |
| const scalarField & | magSf () const |
| Face area magnitudes. More... | |
| const vectorField & | Cf () const |
| Face centres. More... | |
| List< surfZone > | sortedZones (labelList &faceMap) const |
| Sort faces according to zoneIds. More... | |
| void | triFaceFaces (List< face > &plainFaceList) const |
| Create a list of faces from the triFaces. More... | |
| virtual void | swapPoints (pointField &pts) |
| Swap points. Similar to movePoints, but returns the old points. More... | |
| virtual void | scalePoints (const scalar scaleFactor) |
| Scale points. A non-positive factor is ignored. More... | |
| void | checkTriangles (const bool verbose) |
| Check/remove duplicate/degenerate triangles. More... | |
| void | checkEdges (const bool verbose) |
| Check triply (or more) connected edges. More... | |
| void | cleanup (const bool verbose) |
| Remove non-valid triangles. More... | |
| void | compactPoints (labelList &pointMap=const_cast< labelList & >(labelList::null())) |
| Remove unused points and renumber faces in local visit order. More... | |
| void | markZone (const boolList &borderEdge, const label facei, const label currentZone, labelList &faceZone) const |
| Fill faceZone with currentZone for every face reachable. More... | |
| label | markZones (const boolList &borderEdge, labelList &faceZone) const |
| (size and) fills faceZone with zone of face. Zone is area More... | |
| template<class BoolListType > | |
| void | subsetMeshMap (const BoolListType &include, labelList &pointMap, labelList &faceMap) const |
| Create mappings for a sub-surface. More... | |
| triSurface | subsetMesh (const UList< bool > &include, labelList &pointMap, labelList &faceMap) const |
| Return a new surface subsetted on the selected faces. More... | |
| triSurface | subsetMesh (const bitSet &include, labelList &pointMap, labelList &faceMap) const |
| Return a new surface subsetted on the selected faces. More... | |
| triSurface | subsetMesh (const UList< bool > &include) const |
| Return a new surface subsetted on the selected faces. More... | |
| triSurface | subsetMesh (const bitSet &include) const |
| Return a new surface subsetted on the selected faces. More... | |
| triSurface | subsetMesh (const wordRes &includeNames, const wordRes &excludeNames=wordRes()) const |
| Return a new surface subsetted on the selected patch names. More... | |
| void | swapFaces (List< labelledTri > &faceLst) |
| Swap the list of faces being addressed. More... | |
| void | transfer (triSurface &surf) |
| Alter contents by transferring (triangles, points) components. More... | |
| void | transfer (MeshedSurface< labelledTri > &surf) |
| Alter contents by transferring (triangles, points) components. More... | |
| void | write (Ostream &os) const |
| Write to Ostream in simple OpenFOAM format. More... | |
| void | write (const fileName &, const bool sortByRegion=false) const |
| Generic write routine (uses extension to determine type). More... | |
| void | write (const fileName &filename, const word &fileType, const bool sortByRegion=false) const |
| Generic write routine for given format type. More... | |
| void | write (const Time &d) const |
| Write to database. More... | |
| void | writeStats (Ostream &os) const |
| Write some statistics. More... | |
| void | operator= (const triSurface &surf) |
| Copy assignment. More... | |
| void | operator= (triSurface &&surf) |
| Move assignment. More... | |
| void | operator= (MeshedSurface< labelledTri > &&surf) |
| Move assignment. More... | |
| Public Member Functions inherited from PrimitivePatch<::Foam::List< labelledTri >, pointField > | |
| PrimitivePatch (const ::Foam::List< labelledTri > &faces, const pointField &points) | |
| Construct from components. More... | |
| PrimitivePatch (::Foam::List< labelledTri > &&faces, const pointField &points) | |
| Construct from components, transferring faces. More... | |
| PrimitivePatch (::Foam::List< labelledTri > &faces, pointField &points, const bool reuse) | |
| Construct from components, reuse storage. More... | |
| PrimitivePatch (const PrimitivePatch< ::Foam::List< labelledTri >, pointField > &pp) | |
| Copy construct. More... | |
| virtual | ~PrimitivePatch () |
| Destructor. More... | |
| void | clearOut () |
| void | clearGeom () |
| void | clearTopology () |
| void | clearPatchMeshAddr () |
| void | swap (PrimitivePatch &)=delete |
| Suppress direct swapping, since storage containers may be const. More... | |
| const Field< point_type > & | points () const noexcept |
| Return reference to global points. More... | |
| label | nFaces () const noexcept |
| Number of faces in the patch. More... | |
| label | nPoints () const |
| Number of points supporting patch faces. More... | |
| label | nEdges () const |
| Number of edges in patch. More... | |
| const edgeList & | edges () const |
| Return list of edges, address into LOCAL point list. More... | |
| const edgeList::subList | internalEdges () const |
| Return sub-list of internal edges, address into LOCAL point list. More... | |
| const edgeList::subList | boundaryEdges () const |
| Return sub-list of boundary edges, address into LOCAL point list. More... | |
| label | nInternalEdges () const |
| Number of internal edges. More... | |
| label | nBoundaryEdges () const |
| Number of boundary edges == (nEdges() - nInternalEdges()) More... | |
| bool | isInternalEdge (const label edgei) const |
| Is internal edge? More... | |
| const labelList & | boundaryPoints () const |
| Return list of boundary points, address into LOCAL point list. More... | |
| const labelListList & | faceFaces () const |
| Return face-face addressing. More... | |
| const labelListList & | edgeFaces () const |
| Return edge-face addressing. More... | |
| const labelListList & | faceEdges () const |
| Return face-edge addressing. More... | |
| const labelListList & | pointEdges () const |
| Return point-edge addressing. More... | |
| const labelListList & | pointFaces () const |
| Return point-face addressing. More... | |
| const List< face_type > & | localFaces () const |
| Return patch faces addressing into local point list. More... | |
| labelList | boundaryFaces () const |
| labelList | uniqBoundaryFaces () const |
| const labelList & | meshPoints () const |
| Return labelList of mesh points in patch. More... | |
| const Map< label > & | meshPointMap () const |
| Mesh point map. More... | |
| const Field< point_type > & | localPoints () const |
| Return pointField of points in patch. More... | |
| const labelList & | localPointOrder () const |
| Return orders the local points for most efficient search. More... | |
| label | whichPoint (const label gp) const |
| Given a global point index, return the local point index. More... | |
| edge | meshEdge (const label edgei) const |
| From patch edge to global edge using meshPoints. More... | |
| edge | meshEdge (const edge &e) const |
| From patch edge to global edge using meshPoints. More... | |
| label | meshEdge (const label edgei, const edgeList &allEdges, const labelListList &pointEdges) const |
| label | findEdge (const edge &e) const |
| labelList | meshEdges (const edgeList &allEdges, const labelListList &cellEdges, const labelList &faceCells) const |
| labelList | meshEdges (const edgeList &allEdges, const labelListList &pointEdges) const |
| labelList | meshEdges (const labelUList &edgeLabels, const edgeList &allEdges, const labelListList &pointEdges) const |
| const Field< point_type > & | faceCentres () const |
| Return face centres for patch. More... | |
| const Field< point_type > & | faceAreas () const |
| Return face area vectors for patch. More... | |
| const Field< scalar > & | magFaceAreas () const |
| Return face area magnitudes for patch. More... | |
| const Field< point_type > & | faceNormals () const |
| Return face unit normals for patch. More... | |
| const Field< point_type > & | pointNormals () const |
| Return point normals for patch. More... | |
| bool | hasFaceAreas () const |
| bool | hasFaceCentres () const |
| bool | hasFaceNormals () const |
| bool | hasPointNormals () const |
| bool | hasBoundaryPoints () const |
| bool | hasFaceFaces () const |
| bool | hasEdgeFaces () const |
| bool | hasFaceEdges () const |
| bool | hasPointEdges () const |
| bool | hasPointFaces () const |
| bool | hasMeshPointMap () const |
| List< objectHit > | projectPoints (const ToPatch &targetPatch, const Field< point_type > &projectionDirection, const intersection::algorithm=intersection::FULL_RAY, const intersection::direction=intersection::VECTOR) const |
| Project vertices of patch onto another patch. More... | |
| Foam::List< Foam::objectHit > | projectPoints (const ToPatch &targetPatch, const Field< typename Foam::PrimitivePatch< ::Foam::List< labelledTri >, pointField >::point_type > &projectionDirection, const intersection::algorithm alg, const intersection::direction dir) const |
| List< objectHit > | projectFaceCentres (const ToPatch &targetPatch, const Field< point_type > &projectionDirection, const intersection::algorithm=intersection::FULL_RAY, const intersection::direction=intersection::VECTOR) const |
| Project vertices of patch onto another patch. More... | |
| Foam::List< Foam::objectHit > | projectFaceCentres (const ToPatch &targetPatch, const Field< typename Foam::PrimitivePatch< ::Foam::List< labelledTri >, pointField >::point_type > &projectionDirection, const intersection::algorithm alg, const intersection::direction dir) const |
| const labelListList & | edgeLoops () const |
| Return list of closed loops of boundary vertices. More... | |
| surfaceTopo | surfaceType () const |
| Calculate surface type formed by patch. More... | |
| bool | checkTopology (const bool report=false, labelHashSet *setPtr=nullptr) const |
| Check surface formed by patch for manifoldness (see above). More... | |
| bool | checkPointManifold (const bool report=false, labelHashSet *setPtr=nullptr) const |
| Checks primitivePatch for faces sharing point but not edge. More... | |
| virtual void | movePoints (const Field< point_type > &) |
| Correct patch after moving points. More... | |
| void | operator= (const PrimitivePatch< ::Foam::List< labelledTri >, pointField > &rhs) |
| Copy assign faces. Leave points alone (could be a reference). More... | |
| void | operator= (PrimitivePatch< ::Foam::List< labelledTri >, pointField > &&rhs) |
| Move assign faces. Leave points alone (could be a reference). More... | |
| label | whichEdge (const edge &e) const |
| Identical to findEdge. More... | |
| Public Member Functions inherited from PrimitivePatchBase | |
| ClassName ("PrimitivePatch") | |
| Runtime type information. More... | |
| PrimitivePatchBase ()=default | |
| Default construct. More... | |
| Public Member Functions inherited from List< labelledTri > | |
| constexpr | List () noexcept |
| Default construct. More... | |
| List (const label len) | |
| Construct with given size. More... | |
| List (const label len, const labelledTri &val) | |
| Construct with given size and value for all elements. More... | |
| List (const label len, const Foam::zero) | |
| Construct with given size initializing all elements to zero. More... | |
| List (const Foam::one, const labelledTri &val) | |
| Construct with length=1, copying the value as the only content. More... | |
| List (const Foam::one, labelledTri &&val) | |
| Construct with length=1, moving the value as the only content. More... | |
| List (const Foam::one, const Foam::zero) | |
| Construct with length=1, initializing content to zero. More... | |
| List (const List< labelledTri > &a) | |
| Copy construct from list. More... | |
| List (const UList< labelledTri > &a) | |
| Copy construct contents from list. More... | |
| List (List< labelledTri > &a, bool reuse) | |
| Construct as copy or re-use as specified. More... | |
| List (const UList< labelledTri > &list, const labelUList &indices) | |
| Copy construct subset of list. More... | |
| List (const UList< labelledTri > &list, const FixedList< label, N > &indices) | |
| Copy construct subset of list. More... | |
| List (const FixedList< labelledTri, N > &list) | |
| Construct as copy of FixedList<T, N> More... | |
| List (const PtrList< labelledTri > &list) | |
| Construct as copy of PtrList<T> More... | |
| List (const SLList< labelledTri > &list) | |
| Construct as copy of SLList<T> More... | |
| List (const IndirectListBase< labelledTri, Addr > &list) | |
| Construct as copy of IndirectList contents. More... | |
| List (std::initializer_list< labelledTri > list) | |
| Construct from an initializer list. More... | |
| List (List< labelledTri > &&list) | |
| Move construct from List. More... | |
| List (DynamicList< labelledTri, SizeMin > &&list) | |
| Move construct from DynamicList. More... | |
| List (SortableList< labelledTri > &&list) | |
| Move construct from SortableList. More... | |
| List (SLList< labelledTri > &&list) | |
| Move construct from SLList. More... | |
| List (Istream &is) | |
| Construct from Istream. More... | |
| autoPtr< List< labelledTri > > | clone () const |
| Clone. More... | |
| ~List () | |
| Destructor. More... | |
| void | clear () |
| Clear the list, i.e. set size to zero. More... | |
| void | resize (const label len) |
| Adjust allocated size of list. More... | |
| void | resize (const label len, const labelledTri &val) |
| Adjust allocated size of list and set val for new elements. More... | |
| void | resize (const label newLen) |
| void | resize_nocopy (const label len) |
| Adjust allocated size of list without necessarily. More... | |
| void | setSize (const label n) |
| Alias for resize() More... | |
| void | setSize (const label n, const labelledTri &val) |
| Alias for resize() More... | |
| void | append (const labelledTri &val) |
| Append an element at the end of the list. More... | |
| void | append (labelledTri &&val) |
| Move append an element at the end of the list. More... | |
| void | append (const UList< labelledTri > &list) |
| Append a List to the end of this list. More... | |
| void | append (const IndirectListBase< labelledTri, Addr > &list) |
| Append IndirectList contents at the end of this list. More... | |
| label | appendUniq (const labelledTri &val) |
| Append an element if not already in the list. More... | |
| void | transfer (List< labelledTri > &list) |
| void | transfer (DynamicList< labelledTri, SizeMin > &list) |
| void | transfer (SortableList< labelledTri > &list) |
| labelledTri & | newElmt (const label i) |
| void | operator= (const UList< labelledTri > &a) |
| Assignment to UList operator. Takes linear time. More... | |
| void | operator= (const List< labelledTri > &list) |
| Assignment operator. Takes linear time. More... | |
| void | operator= (const SLList< labelledTri > &list) |
| Assignment to SLList operator. Takes linear time. More... | |
| void | operator= (const IndirectListBase< labelledTri, Addr > &list) |
| Assignment from IndirectList. Takes linear time. More... | |
| void | operator= (const FixedList< labelledTri, N > &list) |
| Copy assignment from FixedList. More... | |
| void | operator= (std::initializer_list< labelledTri > list) |
| Assignment to an initializer list. More... | |
| void | operator= (const labelledTri &val) |
| Assignment of all entries to the given value. More... | |
| void | operator= (const Foam::zero) |
| Assignment of all entries to zero. More... | |
| void | operator= (List< labelledTri > &&list) |
| Move assignment. Takes constant time. More... | |
| void | operator= (DynamicList< labelledTri, SizeMin > &&list) |
| Move assignment. Takes constant time. More... | |
| void | operator= (SortableList< labelledTri > &&list) |
| Move assignment. Takes constant time. More... | |
| void | operator= (SLList< labelledTri > &&list) |
| Move assignment. Takes constant time. More... | |
| Istream & | readList (Istream &is) |
| Read List from Istream, discarding contents of existing List. More... | |
| Istream & | readList (Istream &is) |
| Istream & | readList (Istream &is) |
| void | shallowCopy (const UList< labelledTri > &)=delete |
| No shallowCopy permitted. More... | |
| std::enable_if< std::is_same< bool, TypeT >::value, bool >::type | set (const label i, bool val=true) |
| A bitSet::set() method for a list of bool. More... | |
| Public Member Functions inherited from triSurfaceRegionSearch | |
| triSurfaceRegionSearch (const triSurface &) | |
| Construct from surface. Holds reference to surface! More... | |
| triSurfaceRegionSearch (const triSurface &, const dictionary &dict) | |
| Construct from surface and dictionary. Holds reference to surface! More... | |
| ~triSurfaceRegionSearch () | |
| Destructor. More... | |
| void | clearOut () |
| Clear storage. More... | |
| const PtrList< treeType > & | treeByRegion () const |
| Demand driven construction of octree for each region. More... | |
| void | findNearest (const pointField &samples, const scalarField &nearestDistSqr, const labelList ®ionIndices, List< pointIndexHit > &info) const |
| Find the nearest point on the surface out of the regions. More... | |
| Public Member Functions inherited from triSurfaceSearch | |
| triSurfaceSearch (const triSurface &surface) | |
| Construct from surface. Holds reference to surface! More... | |
| triSurfaceSearch (const triSurface &surface, const dictionary &dict) | |
| Construct from surface and dictionary. More... | |
| triSurfaceSearch (const triSurface &surface, const scalar tolerance, const label maxTreeDepth=10) | |
| Construct from components. More... | |
| ~triSurfaceSearch () | |
| Destructor. More... | |
| void | clearOut () |
| Clear storage. More... | |
| const indexedOctree< treeDataTriSurface > & | tree () const |
| Demand driven construction of the octree. More... | |
| const triSurface & | surface () const |
| Return reference to the surface. More... | |
| scalar | tolerance () const |
| Return tolerance to use in searches. More... | |
| label | maxTreeDepth () const |
| Return max tree depth of octree. More... | |
| boolList | calcInside (const pointField &searchPoints) const |
| Calculate for each searchPoint inside/outside status. More... | |
| void | findNearest (const pointField &samples, const scalarField &nearestDistSqr, List< pointIndexHit > &info) const |
| pointIndexHit | nearest (const point &pt, const vector &span) const |
| Calculate nearest point on surface for single searchPoint. Returns. More... | |
| void | findLine (const pointField &start, const pointField &end, List< pointIndexHit > &info) const |
| void | findLineAny (const pointField &start, const pointField &end, List< pointIndexHit > &info) const |
| void | findLineAll (const pointField &start, const pointField &end, List< List< pointIndexHit >> &info) const |
| Calculate all intersections from start to end. More... | |
Static Public Member Functions | |
| static void | overlappingSurface (const triSurface &, const List< treeBoundBox > &, boolList &includedFace) |
| Calculate the triangles that are overlapping bounds. More... | |
| static triSurface | overlappingSurface (const triSurface &, const List< treeBoundBox > &, labelList &subPointMap, labelList &subFaceMap) |
| Subset the part of surface that is overlapping bounds. More... | |
| Static Public Member Functions inherited from searchableSurface | |
| static autoPtr< searchableSurface > | New (const word &surfaceType, const IOobject &io, const dictionary &dict) |
| Return a reference to the selected searchableSurface. More... | |
| Static Public Member Functions inherited from regIOobject | |
| template<class Type > | |
| static Type & | store (Type *p) |
| Transfer pointer ownership to its registry. More... | |
| template<class Type > | |
| static Type & | store (autoPtr< Type > &ptr) |
| Transfer pointer ownership to its registry. More... | |
| template<class Type > | |
| static Type & | store (autoPtr< Type > &&ptr) |
| Transfer pointer ownership to its registry. More... | |
| template<class Type > | |
| static Type & | store (refPtr< Type > &ptr) |
| Transfer pointer ownership to its registry. More... | |
| template<class Type > | |
| static Type & | store (refPtr< Type > &&ptr) |
| Transfer pointer ownership to its registry. More... | |
| template<class Type > | |
| static Type & | store (tmp< Type > &ptr) |
| Transfer pointer ownership to its registry. More... | |
| template<class Type > | |
| static Type & | store (tmp< Type > &&ptr) |
| Transfer pointer ownership to its registry. More... | |
| Static Public Member Functions inherited from IOobject | |
| static bool | bannerEnabled () noexcept |
| Status of output file banner. More... | |
| static bool | bannerEnabled (bool on) noexcept |
| Enable/disable an output file banner. More... | |
| static bool | fileNameComponents (const fileName &path, fileName &instance, fileName &local, word &name) |
| Split path into instance, local, name components. More... | |
| template<class StringType > | |
| static word | groupName (StringType base, const word &group) |
| Create dot-delimited name.group string. More... | |
| static word | group (const word &name) |
| Return group (extension part of name) More... | |
| static word | member (const word &name) |
| Return member (name without the extension) More... | |
| static word | scopedName (const std::string &scope, const word &name) |
| Create scope:name or scope_name string. More... | |
| static IOobject | selectIO (const IOobject &io, const fileName &altFile, const word &ioName="") |
| Return the IOobject, but also consider an alternative file name. More... | |
| static Ostream & | writeBanner (Ostream &os, const bool noSyntaxHint=false) |
| Write the standard OpenFOAM file/dictionary banner. More... | |
| static Ostream & | writeDivider (Ostream &os) |
| Write the standard file section divider. More... | |
| static Ostream & | writeEndDivider (Ostream &os) |
| Write the standard end file divider. More... | |
| Static Public Member Functions inherited from triSurface | |
| static fileName | triSurfInstance (const Time &) |
| Name of triSurface directory to use. More... | |
| static wordHashSet | readTypes () |
| Known readable file-types, including via friends or proxies. More... | |
| static wordHashSet | writeTypes () |
| Known writable file-types, including via friends or proxies. More... | |
| static bool | canReadType (const word &fileType, bool verbose=false) |
| Can we read this file format? More... | |
| static bool | canWriteType (const word &fileType, bool verbose=false) |
| Can we write this file format? More... | |
| static bool | canRead (const fileName &name, bool verbose=false) |
| Can we read this file format? More... | |
| static fileName | relativeFilePath (const IOobject &io, const fileName &f, const bool isGlobal=true) |
| Return fileName. More... | |
| static fileName | checkFile (const IOobject &io, const bool isGlobal=true) |
| Return fileName to load IOobject from. More... | |
| static fileName | checkFile (const IOobject &io, const dictionary &dict, const bool isGlobal=true) |
| Return fileName to load IOobject from. More... | |
| static fileName | findFile (const IOobject &io, const bool isGlobal=true) |
| static fileName | findFile (const IOobject &io, const dictionary &dict, const bool isGlobal=true) |
| static autoPtr< triSurface > | New (const fileName &name, const word &fileType) |
| Read construct from filename with given file type. More... | |
| static autoPtr< triSurface > | New (const fileName &name) |
| Read construct from filename (file type implicit from extension) More... | |
| Static Public Member Functions inherited from List< labelledTri > | |
| static const List< labelledTri > & | null () |
| Return a null List. More... | |
Static Public Attributes | |
| static const Enum< distributionType > | distributionTypeNames_ |
| Static Public Attributes inherited from triSurfaceMesh | |
| static word | meshSubDir = "triSurface" |
| Return the mesh sub-directory name (usually "triSurface") More... | |
| Static Public Attributes inherited from IOobject | |
| static const Enum< fileCheckTypes > | fileCheckTypesNames |
| Names for the fileCheckTypes. More... | |
| static char | scopeSeparator |
| Character for scoping object names (':' or '_') More... | |
| static fileCheckTypes | fileModificationChecking |
| Type of file modification checking. More... | |
| static float | fileModificationSkew |
| Time skew (seconds) for file modification checks. More... | |
| static int | maxFileModificationPolls |
| Max number of times to poll for file modification changes. More... | |
Additional Inherited Members | |
| Public Attributes inherited from HashTable< regIOobject * > | |
| const typedef regIOobject * * | const_pointer |
| Const pointer type for the stored value_type. More... | |
| const typedef regIOobject * & | const_reference |
| Const reference to the stored value_type. More... | |
| Protected Member Functions inherited from triSurfaceMesh | |
| bool | isSurfaceClosed () const |
| Check whether surface is closed without calculating any permanent. More... | |
| triSurfaceMesh (const triSurfaceMesh &)=delete | |
| No copy construct. More... | |
| void | operator= (const triSurfaceMesh &)=delete |
| No copy assignment. More... | |
| Protected Member Functions inherited from regIOobject | |
| bool | readHeaderOk (const IOstreamOption::streamFormat fmt, const word &typeName) |
| Helper: check readOpt flags and read if necessary. More... | |
| Protected Member Functions inherited from IOobject | |
| void | setBad (const string &s) |
| Set the object state to bad. More... | |
| Protected Member Functions inherited from HashTable< regIOobject * > | |
| bool | iterator_erase (node_type *&entry, label &index) |
| Low-level entry erasure using iterator internals. More... | |
| Protected Member Functions inherited from triSurface | |
| pointField & | storedPoints () |
| Non-const access to global points. More... | |
| List< labelledTri > & | storedFaces () |
| Non-const access to the faces. More... | |
| Static Protected Member Functions inherited from triSurfaceMesh | |
| static bool | addFaceToEdge (const edge &, EdgeMap< label > &) |
| Helper function for isSurfaceClosed. More... | |
| static void | getNextIntersections (const indexedOctree< treeDataTriSurface > &octree, const point &start, const point &end, const vector &smallVec, DynamicList< pointIndexHit > &hits) |
| Steps to next intersection. Adds smallVec and starts tracking. More... | |
| Static Protected Member Functions inherited from IOobject | |
| static void | writeHeaderContent (Ostream &os, const IOobject &io, const word &objectType, const dictionary *metaDataDict=nullptr) |
| static void | writeHeaderContent (dictionary &dict, const IOobject &io, const word &objectType, IOstreamOption streamOpt, const dictionary *metaDataDict=nullptr) |
| Protected Attributes inherited from triSurfaceMesh | |
| fileName | fName_ |
| Supplied fileName override. More... | |
| scalar | minQuality_ |
| Optional min triangle quality. Triangles below this get. More... | |
| autoPtr< indexedOctree< treeDataEdge > > | edgeTree_ |
| Search tree for boundary edges. More... | |
| wordList | regions_ |
| Names of regions. More... | |
| label | surfaceClosed_ |
| Is surface closed. More... | |
| volumeType | outsideVolType_ |
| If surface is closed, what is type of outside points. More... | |
| Static Protected Attributes inherited from regIOobject | |
| static bool | masterOnlyReading = false |
| To flag master-only reading of objects. More... | |
IOoject and searching on distributed triSurface. All processor hold (possibly overlapping) part of the overall surface. All queries are distributed to the processor that can answer it and the result sent back.
Note: addressing used: distributedTriSurfaceMesh: none
Definition at line 85 of file distributedTriSurfaceMesh.H.
| enum distributionType |
| Enumerator | |
|---|---|
| FOLLOW | |
| INDEPENDENT | |
| DISTRIBUTED | |
| FROZEN | |
Definition at line 93 of file distributedTriSurfaceMesh.H.
| distributedTriSurfaceMesh | ( | const IOobject & | io, |
| const triSurface & | s, | ||
| const dictionary & | dict | ||
| ) |
Construct from triSurface.
Definition at line 2445 of file distributedTriSurfaceMesh.C.
References Foam::expressions::patchExpr::debug, Foam::endl(), forAll, Pstream::gatherList(), Foam::Info, InfoInFunction, UPstream::myProcNo(), UPstream::nProcs(), Foam::read(), Pstream::scatterList(), and Foam::edgeMeshTools::writeStats().
| distributedTriSurfaceMesh | ( | const IOobject & | io | ) |
Construct read. Does findInstance to find io.local().
Definition at line 2494 of file distributedTriSurfaceMesh.C.
References searchableSurface::bounds(), triSurface::checkFile(), Foam::expressions::patchExpr::debug, DebugInFunction, distributedTriSurfaceMesh::distribute(), distributedTriSurfaceMesh::DISTRIBUTED, Foam::endl(), Foam::faceMap(), forAll, Pstream::gatherList(), distributedTriSurfaceMesh::INDEPENDENT, Foam::Info, InfoInFunction, IOobject::localFilePath(), UPstream::myProcNo(), IOobject::name(), UPstream::nProcs(), UPstream::parRun(), boundBox::reduce(), Pstream::scatterList(), and distributedTriSurfaceMesh::writeStats().
| distributedTriSurfaceMesh | ( | const IOobject & | io, |
| const dictionary & | dict | ||
| ) |
Construct from dictionary (used by searchableSurface).
Does read. Does findInstance to find io.local().
Definition at line 2600 of file distributedTriSurfaceMesh.C.
References triSurface::checkFile(), Foam::expressions::patchExpr::debug, DebugInFunction, dict, Foam::endl(), Foam::faceMap(), forAll, Pstream::gatherList(), Enum< EnumType >::getOrDefault(), Foam::Info, InfoInFunction, IOobject::localFilePath(), UPstream::myProcNo(), IOobject::name(), volumeType::names, UPstream::nProcs(), UPstream::parRun(), Foam::read(), Pstream::scatterList(), and Foam::edgeMeshTools::writeStats().
|
virtual |
Destructor.
Definition at line 2742 of file distributedTriSurfaceMesh.C.
| TypeName | ( | "distributedTriSurfaceMesh" | ) |
Runtime type information.
| void clearOut | ( | ) |
Clear storage.
Definition at line 2748 of file distributedTriSurfaceMesh.C.
References triSurfaceMesh::clearOut().
| const Foam::globalIndex & globalTris | ( | ) | const |
Triangle indexing (demand driven)
Definition at line 2757 of file distributedTriSurfaceMesh.C.
References globalIndex::reset().
Referenced by distributedTriSurfaceMesh::globalSize().
|
inlinevirtual |
Range of global indices that can be returned.
Reimplemented from searchableSurface.
Definition at line 452 of file distributedTriSurfaceMesh.H.
References distributedTriSurfaceMesh::globalTris(), and globalIndex::size().
|
virtual |
Reimplemented from triSurfaceMesh.
Definition at line 2996 of file distributedTriSurfaceMesh.C.
References addProfiling, List< T >::append(), mapDistributeBase::comm(), mapDistributeBase::constructHasFlip(), mapDistributeBase::constructMap(), Foam::expressions::patchExpr::debug, mapDistributeBase::distribute(), mapDistribute::distribute(), Foam::endl(), triSurfaceMesh::findNearest(), Tuple2< T1, T2 >::first(), forAll, PointIndexHit< PointType >::hit(), PointIndexHit< PointType >::hitPoint(), PointIndexHit< PointType >::index(), Foam::magSqr(), Foam::max(), UPstream::msgType(), UPstream::myProcNo(), Foam::nearestZero, UPstream::nonBlocking, UPstream::nProcs(), UPstream::parRun(), Foam::Pout, autoPtr< T >::reset(), samples(), Tuple2< T1, T2 >::second(), List< T >::setSize(), Foam::sqr(), Foam::sqrt(), mapDistributeBase::subHasFlip(), mapDistributeBase::subMap(), List< T >::transfer(), globalIndex::whichProcID(), and Foam::Zero.
Referenced by exact::correct().
|
virtual |
Find the nearest locations for the supplied points to a.
particular region in the searchable surface.
Reimplemented from triSurfaceMesh.
Definition at line 3378 of file distributedTriSurfaceMesh.C.
References addProfiling, Foam::expressions::patchExpr::debug, mapDistribute::distribute(), Foam::endl(), triSurfaceMesh::findNearest(), forAll, Foam::magSqr(), Foam::max(), UPstream::myProcNo(), UPstream::parRun(), Foam::Pout, mapDistribute::reverseDistribute(), samples(), Foam::sqrt(), and Foam::Zero.
|
virtual |
Find first intersection on segment from start to end.
Note: searchableSurfacesQueries expects no intersection to be found if start==end. Is problem?
Reimplemented from triSurfaceMesh.
Definition at line 3525 of file distributedTriSurfaceMesh.C.
References stdFoam::end(), triSurfaceMesh::findLine(), and UPstream::parRun().
|
virtual |
Return any intersection on segment from start to end.
Reimplemented from triSurfaceMesh.
Definition at line 3549 of file distributedTriSurfaceMesh.C.
References stdFoam::end(), triSurfaceMesh::findLineAny(), and UPstream::parRun().
|
virtual |
Get all intersections in order from start to end.
Reimplemented from triSurfaceMesh.
Definition at line 3573 of file distributedTriSurfaceMesh.C.
References addProfiling, List< T >::clear(), Foam::expressions::patchExpr::debug, stdFoam::end(), Foam::endl(), triSurfaceMesh::findLineAll(), forAll, Foam::magSqr(), UPstream::parRun(), Foam::Pout, Foam::returnReduce(), and List< T >::setSize().
|
virtual |
From a set of points and indices get the region.
Reimplemented from triSurfaceMesh.
Definition at line 3734 of file distributedTriSurfaceMesh.C.
References addProfiling, Foam::expressions::patchExpr::debug, Foam::endl(), forAll, UPstream::parRun(), Foam::Pout, mapDistribute::reverseDistribute(), s, and List< T >::setSize().
|
virtual |
From a set of points and indices get the normal.
Reimplemented from triSurfaceMesh.
Definition at line 3817 of file distributedTriSurfaceMesh.C.
References addProfiling, Foam::expressions::patchExpr::debug, Foam::endl(), forAll, triSurfaceMesh::getNormal(), UPstream::parRun(), Foam::Pout, mapDistribute::reverseDistribute(), and s.
Referenced by exact::correct().
|
virtual |
Determine type (inside/outside/mixed) for point. unknown if.
cannot be determined (e.g. non-manifold surface)
Reimplemented from triSurfaceMesh.
Definition at line 3951 of file distributedTriSurfaceMesh.C.
References addProfiling, DynamicList< T, SizeMin >::append(), mapDistributeBase::comm(), mapDistributeBase::constructHasFlip(), mapDistributeBase::constructMap(), Foam::expressions::patchExpr::debug, mapDistributeBase::distribute(), mapDistribute::distribute(), Foam::endl(), Foam::exit(), Foam::FatalError, FatalErrorInFunction, forAll, triSurfaceMesh::getVolumeType(), volumeType::INSIDE, Foam::max(), UPstream::msgType(), volumeType::names, indexedOctree< Type >::nodes(), indexedOctree< Type >::nodeTypes(), UPstream::nonBlocking, UPstream::nProcs(), volumeType::OUTSIDE, UPstream::parRun(), Foam::Pout, autoPtr< T >::reset(), samples(), List< T >::setSize(), PackedList< Width >::setSize(), Foam::sqr(), mapDistributeBase::subHasFlip(), mapDistributeBase::subMap(), and volumeType::UNKNOWN.
|
virtual |
Set bounds of surface. Bounds currently set as list of.
bounding boxes. Will do redistribution of surface to locally have all triangles overlapping bounds. Larger bounds: more triangles (memory), more fully local tests (quick). keepNonLocal = true : keep triangles that do not overlap any processor bounds. Should really be split into a routine to determine decomposition and one that does actual distribution but determining decomposition with duplicate triangle merging requires same amount as work as actual distribution.
Reimplemented from searchableSurface.
Definition at line 4462 of file distributedTriSurfaceMesh.C.
References addProfiling, Foam::DelaunayMeshTools::allPoints(), Foam::expressions::patchExpr::debug, UPstream::defaultCommsType, Foam::constant::electromagnetic::e, treeBoundBox::edges, Foam::endl(), Pstream::exchangeSizes(), Foam::exit(), Foam::faceMap(), Foam::FatalError, FatalErrorInFunction, PstreamBuffers::finishedSends(), Foam::flatOutput(), forAll, Pstream::gatherList(), Foam::identity(), Foam::Info, InfoInFunction, UPstream::myProcNo(), OFstream::name(), UPstream::nProcs(), triSurface::operator=(), UPstream::parRun(), patches, path(), points, PrimitivePatch< FaceList, PointField >::points(), Foam::Pout, autoPtr< T >::reset(), s, Pstream::scatterList(), List< T >::setSize(), IOobject::time(), and OBJstream::write().
Referenced by distributedTriSurfaceMesh::distributedTriSurfaceMesh().
|
virtual |
WIP. From a set of hits (points and.
indices) get the specified field. Misses do not get set.
Reimplemented from triSurfaceMesh.
Definition at line 4216 of file distributedTriSurfaceMesh.C.
References addProfiling, Foam::expressions::patchExpr::debug, Foam::endl(), fld, forAll, Foam::getField(), triSurfaceMesh::getField(), UPstream::parRun(), Foam::Pout, mapDistribute::reverseDistribute(), and Foam::HashTableOps::values().
|
static |
Calculate the triangles that are overlapping bounds.
Definition at line 4285 of file distributedTriSurfaceMesh.C.
References f(), forAll, VectorSpace< Form, Cmpt, Ncmpts >::max, Foam::max(), VectorSpace< Form, Cmpt, Ncmpts >::min, p0, s, and List< T >::setSize().
|
static |
Subset the part of surface that is overlapping bounds.
Definition at line 4324 of file distributedTriSurfaceMesh.C.
References s.
|
virtual |
Obtains global indices from pointIndexHit and swaps them back.
to their original processor. Used to calculate local region and normal.
Definition at line 4344 of file distributedTriSurfaceMesh.C.
References mapDistribute::distribute(), forAll, Pstream::gatherList(), Foam::identity(), UPstream::myProcNo(), UPstream::nProcs(), Pstream::scatterList(), List< T >::setSize(), globalIndex::toLocal(), and globalIndex::whichProcID().
| void writeStats | ( | Ostream & | os | ) | const |
Print some stats. Parallel aware version of.
Definition at line 4869 of file distributedTriSurfaceMesh.C.
References PatchTools::calcBounds(), Foam::endl(), volumeType::names, nPoints, os(), boundBox::reduce(), and Foam::returnReduce().
Referenced by distributedTriSurfaceMesh::distributedTriSurfaceMesh().
|
virtual |
Write using stream options.
Do not use the triSurfaceMesh::writeObject since it would filter out empty regions. These need to be preserved in case we want to make decisions based on the number of regions.
Reimplemented from triSurfaceMesh.
Definition at line 4821 of file distributedTriSurfaceMesh.C.
References IOstreamOption::ASCII, Foam::expressions::patchExpr::debug, Foam::endl(), IOstreamOption::format(), IOobject::instance(), Foam::isFile(), Foam::mkDir(), IOobject::objectPath(), fileName::path(), Foam::Pout, and triSurface::write().
|
inlinevirtual |
Is object global.
Reimplemented from triSurfaceMesh.
Definition at line 591 of file distributedTriSurfaceMesh.H.
|
inlinevirtual |
Return complete path + object name if the file exists.
either in the case/processor or case otherwise null
Reimplemented from triSurfaceMesh.
Definition at line 598 of file distributedTriSurfaceMesh.H.
|
static |
Definition at line 101 of file distributedTriSurfaceMesh.H.
1.8.17 