pointToFace.H

Go to the documentation of this file.

/*---------------------------------------------------------------------------*\
  =========                 |
  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   \\    /   O peration     |
    \\  /    A nd           | www.openfoam.com
     \\/     M anipulation  |
-------------------------------------------------------------------------------
    Copyright (C) 2011-2012 OpenFOAM Foundation
    Copyright (C) 2018-2020 OpenCFD Ltd.
-------------------------------------------------------------------------------
License
    This file is part of OpenFOAM.
 
    OpenFOAM is free software: you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
 
    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
    for more details.
 
    You should have received a copy of the GNU General Public License
    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
 
Class
    Foam::pointToFace
 
Description
    A \c topoSetFaceSource to select faces with any
    point or any edge within a given \c pointSet(s).
 
    Operands
    \table
      Operand   | Type        | Location
      input     | pointSet(s) | $FOAM_CASE/constant/polyMesh/sets/<set>
      output    | faceSet     | $FOAM_CASE/constant/polyMesh/sets/<set>
    \endtable
 
Usage
    Minimal example by using \c system/topoSetDict.actions:
    \verbatim
    {
        // Mandatory (inherited) entries
        name        <name>;
        type        faceSet;
        action      <action>;
 
        // Mandatory entries
        source      pointToFace;
        option      <option>;
 
        // Conditional mandatory entries
        // Select either of the below
 
        // Option-1
        sets
        (
            <pointSetName1>
            <pointSetName2>
            ...
        );
 
        // Option-2
        set   <pointSetName>;
    }
    \endverbatim
 
    where the entries mean:
    \table
      Property   | Description                         | Type | Req'd | Dflt
      name       | Name of faceSet                     | word |  yes  | -
      type       | Type name: faceSet                  | word |  yes  | -
      action     | Action applied on faces - see below | word |  yes  | -
      source     | Source name: pointToFace            | word |  yes  | -
      option     | Selection type - see below          | word |  yes  | -
    \endtable
 
    Options for the \c action entry:
    \verbatim
      new      | Create a new faceSet from selected faces
      add      | Add selected faces into this faceSet
      subtract | Remove selected faces from this faceSet
    \endverbatim
 
    Options for the \c option entry:
    \verbatim
      any     | Any point in the pointSet
      edge    | Two consecutive points (an edge) in the pointSet
      all     | All points in the pointSet
    \endverbatim
 
    Options for the conditional mandatory entries:
    \verbatim
      Entry    | Description                | Type     | Req'd  | Dflt
      sets     | Names of input pointSets   | wordList | cond'l | -
      set      | Name of input pointSet     | word     | cond'l | -
    \endverbatim
 
Note
    The order of precedence among the conditional mandatory entries from the
    highest to the lowest is \c sets, and \c set.
 
See also
    - Foam::topoSetSource
    - Foam::topoSetFaceSource
 
SourceFiles
    pointToFace.C
 
\*---------------------------------------------------------------------------*/
 
#ifndef pointToFace_H
#define pointToFace_H
 
#include "topoSetFaceSource.H"
#include "Enum.H"
 
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
namespace Foam
{
 
/*---------------------------------------------------------------------------*\
                        Class pointToFace Declaration
\*---------------------------------------------------------------------------*/
 
class pointToFace
:
    public topoSetFaceSource
{
 
public:
 
        //- Enumeration defining the valid options
        enum pointAction
        {
            ANY,
            ALL,
            EDGE
        };
 
 
private:
 
        //- Add usage string
        static addToUsageTable usage_;
 
        static const Enum<pointAction> pointActionNames_;
 
        //- Names of sets to use
        wordList names_;
 
        //- Option
        pointAction option_;
 
 
    // Private Member Functions
 
        //- Depending on face to cell option add to or delete from faceSet.
        void combine(topoSet& set, const bool add, const word& setName) const;
 
 
public:
 
    //- Runtime type information
    TypeName("pointToFace");
 
 
    // Constructors
 
        //- Construct from components
        pointToFace
        (
            const polyMesh& mesh,
            const word& setName,
            const pointAction option
        );
 
        //- Construct from dictionary
        pointToFace(const polyMesh& mesh, const dictionary& dict);
 
        //- Construct from Istream
        pointToFace(const polyMesh& mesh, Istream& is);
 
 
    //- Destructor
    virtual ~pointToFace() = default;
 
 
    // Member Functions
 
        virtual void applyToSet
        (
            const topoSetSource::setAction action,
            topoSet& set
        ) const;
};
 
 
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
} // End namespace Foam
 
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
#endif
 
// ************************************************************************* //