line.C

Go to the documentation of this file.

/*---------------------------------------------------------------------------*\
  =========                 |
  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   \\    /   O peration     |
    \\  /    A nd           | www.openfoam.com
     \\/     M anipulation  |
-------------------------------------------------------------------------------
    Copyright (C) 2011 OpenFOAM Foundation
-------------------------------------------------------------------------------
License
    This file is part of OpenFOAM.
 
    OpenFOAM is free software: you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
 
    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
    for more details.
 
    You should have received a copy of the GNU General Public License
    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
 
\*---------------------------------------------------------------------------*/
 
#include "line.H"
 
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
namespace Foam
{
 
// * * * * * * * * * * * * * * * Member Functions  * * * * * * * * * * * * * //
 
template<>
scalar line<point2D, const point2D&>::nearestDist
(
    const line<point2D, const point2D&>& e,
    point2D& thisPt,
    point2D& edgePt
) const
{
    vector2D u = end()-start();
    vector2D v = e.end()-e.start();
    vector2D w = start()-e.start();
 
    scalar d = u.perp(v);
 
    if (Foam::mag(d) > VSMALL)
    {
        scalar s = v.perp(w) / d;
 
        if (s <= SMALL)
        {
            thisPt = start();
        }
        else if (s >= (1-SMALL))
        {
            thisPt = end();
        }
        else
        {
            thisPt = start()+s*u;
        }
 
 
        scalar t = u.perp(w) / d;
 
        if (t <= SMALL)
        {
            edgePt = e.start();
        }
        else if (t >= (1-SMALL))
        {
            edgePt = e.end();
        }
        else
        {
            edgePt = e.start()+t*v;
        }
    }
    else
    {
        // Parallel lines. Find overlap of both lines by projecting onto
        // direction vector (now equal for both lines).
 
        scalar edge0 = e.start() & u;
        scalar edge1 = e.end() & u;
        bool edgeOrder = edge0 < edge1;
 
        scalar minEdge = (edgeOrder ? edge0 : edge1);
        scalar maxEdge = (edgeOrder ? edge1 : edge0);
        const point2D& minEdgePt = (edgeOrder ? e.start() : e.end());
        const point2D& maxEdgePt = (edgeOrder ? e.end() : e.start());
 
        scalar this0 = start() & u;
        scalar this1 = end() & u;
        bool thisOrder = this0 < this1;
 
        scalar minThis = min(this0, this1);
        scalar maxThis = max(this1, this0);
        const point2D& minThisPt = (thisOrder ? start() : end());
        const point2D& maxThisPt = (thisOrder ? end() : start());
 
        if (maxEdge < minThis)
        {
            // edge completely below *this
            edgePt = maxEdgePt;
            thisPt = minThisPt;
        }
        else if (maxEdge < maxThis)
        {
            // maxEdge inside interval of *this
            edgePt = maxEdgePt;
            thisPt = nearestDist(edgePt).rawPoint();
        }
        else
        {
            // maxEdge outside. Check if minEdge inside.
            if (minEdge < minThis)
            {
                // Edge completely envelops this. Take any this point and
                // determine nearest on edge.
                thisPt = minThisPt;
                edgePt = e.nearestDist(thisPt).rawPoint();
            }
            else if (minEdge < maxThis)
            {
                // minEdge inside this interval.
                edgePt = minEdgePt;
                thisPt = nearestDist(edgePt).rawPoint();
            }
            else
            {
                // minEdge outside this interval
                edgePt = minEdgePt;
                thisPt = maxThisPt;
            }
        }
    }
 
    return Foam::mag(thisPt - edgePt);
}
 
 
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
} // End namespace Foam
 
// ************************************************************************* //