Collaboration diagram for Multiphase solvers:

## Files | |

file | cavitatingDyMFoam.C |

Transient cavitation solver based on the homogeneous equilibrium model from which the compressibility of the liquid/vapour 'mixture' is obtained, with optional mesh motion and mesh topology changes. | |

file | cavitatingFoam.C |

Transient cavitation solver based on the homogeneous equilibrium model from which the compressibility of the liquid/vapour 'mixture' is obtained. | |

file | compressibleInterFoam.C |

Solver for two compressible, non-isothermal immiscible fluids using a VOF (volume of fluid) phase-fraction based interface capturing approach. | |

file | overCompressibleInterDyMFoam.C |

Solver for two compressible, non-isothermal, immiscible fluids using VOF (i.e. volume of fluid) phase-fraction based interface capturing approach. | |

file | compressibleMultiphaseInterFoam.C |

Solver for N compressible, non-isothermal immiscible fluids using a VOF (volume of fluid) phase-fraction based interface capturing approach. | |

file | driftFluxFoam.C |

Solver for two incompressible fluids using the mixture approach with the drift-flux approximation for relative motion of the phases. | |

file | icoReactingMultiphaseInterFoam.C |

Solver for N incompressible, non-isothermal immiscible fluids with phase-change. Uses a VOF (volume of fluid) phase-fraction based interface capturing approach. | |

file | interCondensatingEvaporatingFoam.C |

Solver for two incompressible, non-isothermal immiscible fluids with phase-change (evaporation-condensation) between a fluid and its vapour. Uses a VOF (volume of fluid) phase-fraction based interface capturing approach. | |

file | interFoam.C |

Solver for two incompressible, isothermal immiscible fluids using a VOF (volume of fluid) phase-fraction based interface capturing approach, with optional mesh motion and mesh topology changes including adaptive re-meshing. | |

file | interMixingFoam.C |

Solver for 3 incompressible fluids, two of which are miscible, using a VOF method to capture the interface, with optional mesh motion and mesh topology changes including adaptive re-meshing. | |

file | overInterDyMFoam.C |

Solver for two incompressible, isothermal immiscible fluids using a VOF (volume of fluid) phase-fraction based interface capturing approach, with optional mesh motion and mesh topology changes including adaptive re-meshing. | |

file | interIsoFoam.C |

Solver derived from interFoam for two incompressible, isothermal immiscible fluids using the isoAdvector phase-fraction based interface capturing approach, with optional mesh motion and mesh topology changes including adaptive re-meshing. | |

file | interPhaseChangeDyMFoam.C |

Solver for two incompressible, isothermal immiscible fluids with phase-change (e.g. cavitation). Uses VOF (volume of fluid) phase-fraction based interface capturing, with optional mesh motion and mesh topology changes including adaptive re-meshing. | |

file | interPhaseChangeFoam.C |

Solver for two incompressible, isothermal immiscible fluids with phase-change (e.g. cavitation). Uses VOF (volume of fluid) phase-fraction based interface capturing. | |

file | overInterPhaseChangeDyMFoam.C |

Solver for two incompressible, isothermal, immiscible fluids with phase-change (e.g. cavitation) using VOF (i.e. volume of fluid) phase-fraction based interface capturing, with optional dynamic mesh motion (including overset) and mesh topology changes including adaptive re-meshing. | |

file | multiphaseEulerFoam.C |

Solver for a system of many compressible fluid phases including heat-transfer. | |

file | multiphaseInterFoam.C |

Solver for N incompressible fluids which captures the interfaces and includes surface-tension and contact-angle effects for each phase, with optional mesh motion and mesh topology changes. | |

file | potentialFreeSurfaceDyMFoam.C |

Incompressible Navier-Stokes solver with inclusion of a wave height field to enable single-phase free-surface approximations, with optional mesh motion and mesh topology changes. | |

file | potentialFreeSurfaceFoam.C |

Incompressible Navier-Stokes solver with inclusion of a wave height field to enable single-phase free-surface approximations. | |

file | reactingTwoPhaseEulerFoam.C |

Solver for a system of two compressible fluid phases with a common pressure, but otherwise separate properties. The type of phase model is run time selectable and can optionally represent multiple species and in-phase reactions. The phase system is also run time selectable and can optionally represent different types of momentum, heat and mass transfer. | |

file | twoLiquidMixingFoam.C |

Solver for mixing two incompressible fluids. | |

file | twoPhaseEulerFoam.C |

Solver for a system of two compressible fluid phases with one dispersed phase. Eg, gas bubbles in a liquid including heat-transfer. | |

This group contains multiphase solvers.